FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Minneapolis Moline M5 Tractor Parts

[Categories] [All Minneapolis Moline Models] [Print]

Brakes

Brake Actuating Assembly - This brake actuating assembly is for tractor models Jet Star, M5, M504, M602, M604, M670, Super M670, 5 Star. (Item #: 105802, Ref: 10P850) $212.00

Brake Actuating Spring - Used with disc brakes. For tractor models GB, GTB, GVI, M5, M602, M670, 5 Star, G705, 2 Star. Replaces A30897, A41816 10P132, 10R752. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105. (Item #: 113798, Ref: A155624) $1.70

Brake Disc, Bonded - This Bonded Brake Disc measures 7.00 inches outside diameter, 3.00 inches inside diameter and 24 splines. For tractor models M5, M504, M602, M604, M670, Super M670. (Item #: 105804, Ref: 70277355) $45.70

Clutch

Ampli Torc Driven Plate - This Plate measures 6.00 inches diameter. For tractor models Jet Star 3, Jet Star 4, M5, M504, M602, M604, M670, M670 Super, Jet Star Orchard, 335. (Item #: 172993, Ref: 207000653) $49.60

Clutch Disc, Remanufactured, 10A13873 - For Minneapolis Moline tractor models M5, M504, M602, M604, 5 Star, Replaces Minneapolis Moline OEM number 10A13873, 10A13874, 10A21897, Clutch Size: 12", Clutch Hub: 1-3/4", Clutch Spline: 20, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206764) $134.00

Clutch Disc, Remanufactured, 10A13873 - For Minneapolis Moline tractor models G900, G950, M5, M504, M602, M604, M670 (Super), M670 Super, 5 Star, Replaces Minneapolis Moline OEM number 10A13873, 10A13874, 10A23741, 10A29113, Clutch Size: 12", Clutch Hub: 1-3/4", Clutch Spline: 20, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 206766) $134.00

Clutch Disc, Remanufactured, Minneapolis Moline - For Minneapolis Moline tractor models G900, G950, M5, M504, M602, M604, M670 (Super), M670 Super, 5 Star, Clutch Size: 12", Clutch Hub: 1-3/4", Clutch Spline: 20, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206765) $114.01

Pilot Bearing - This is a single row, two seal type bearing. Bore 1.575 inch (40.005mm), outside diameter 2.677 inch (67.995mm), width .591 inch (15.011mm). Replaces 836008, 6008-2RS-I, 30-3065154, 86130BH, 303065154GV, 30-3065154GV, 86130BHGV, 104831A, 30-3057496, 72160313, 1138894, 196047M1. (Item #: 172951, Ref: 72160313) $17.97

Cooling System

Fan, 4 Blade - This four blade fan measures 20 inches diameter, 1-1/8 inch pilot hole, mounting holes on 1-3/4 inch centers. For tractor models (G900, G950, G955 all gas), (Super Jet Star 5), M5, M504, M602, M604, M670, M670 Super. (Item #: 163812, Ref: 10A20426) $71.00

Fan Belt - For tractor models 5 Star, M5, M602, M604. (Item #: 181491, Ref: 147849) $13.40

Radiator Hose, Lower - This lower radiator hose measures A= 2 inches, B= 1.625 inches, overall length 7.00 inches. For tractor models M5, M504, M602, M604, (G900 gas or diesel), (M670, M670 Super gas/LP serial number 29901892 and up, diesel serial number 300008200 and up). (Item #: 159210, Ref: 10A9932) $18.00

Radiator Hose, Upper - 1.687 inch inside diameter. For tractor models Super Jet Star 5, M5, M504, M602, M604. (Item #: 159207, Ref: 10A9584) $20.70

Thermostat, 180 Degree - For tractor models BF, BG, G, GB, GBT, M5, R, U, Z. Replaces 101400A (Item #: 110455, Ref: 70229927) $20.30

Water Pump - New Water Pump for tractor models G1000, (G705, G706, G707, G708 all with 504 engine), (G900, GVI with 425 engine), (GB serial number 0670179 and up with 425 diesel engine), (Super Jet Star 5 with 283E-4 engine), (M5, M504, M602, M604, M670, M670 Super all with 336-4 engine), (UB with 425 diesel or 283.7 special engine), (UTS with 283.7 special engine). Replaces 11B28768-R, 10B7165, 11B22310. (Item #: 108031, Ref: 11B28768) $232.00

Decals and Emblems

No
Picture
Decal Set - Red Letter Die cut complete set for model M5. (Item #: 102736, Ref: R1387V) $93.00

Decal Set - For M5, Black. Decal Set. (Item #: 102790, Ref: MMM5B) $37.20

No
Picture
Decal Set - For M5, Red. Decal Set. (Item #: 102789, Ref: MMM5R) $37.20

Drive Train

Input Shaft Oil Seal - Used as a clutch shaft-transmission input shaft oil seal. The width of the seal measures 0.350 inch, 1.750 inches I.D., and an O.D. of 2.254 inches. Replaces 10A20451, 10A10111, 10A29256. For the following tractors: 335, 445, 4 Star, 5 Star, JetStar, JetStar 2, JetStar 3, U302, M604, M670, M5, 2 Star, Big Mo 400, Big Mo 500, Big Mo 600, M504, M602, M670 Super, U302 Super, G1000 Vista (Item #: 152783, Ref: 195503M1) $4.30

No
Picture
PTO Drive Hub - For Minneapolis Moline tractor models M5, M504, M670, Replaces Minneapolis Moline OEM number 12A9736, (Item #: 111671) $54.98

Electrical System

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models BF, RTU, Z, (GB, GTB, Jet Star, Jet Star 3 all with distributor 1112606), 4 Star, 5 Star, UB, UTU, M5, M602, M604. (Item #: 104554, Ref: 1750411M91) $8.70

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. fits tractor models BF, BG, BIG, BigMo 400, BigMo 500, BigMo 600, G, G705, G706, GB, GBLP, GTA, GTB, GTC, GVI, JetStar, JetStar 2, M5, M504, M602, M604, R, RT, RTE, RTI, RTN, RTS, RTU, U, UB, UBE, UBN, UB Special, UBU, UT, UTC, UTE, UTI, UTN, UTS, UTU, Z, ZA, ZAE, ZAN, ZAS, ZAU, ZB, ZBE, ZBN, ZBU, ZT, ZTI, ZTN, ZTS, ZTU, 2 Star, 335, 445, 4 Star, 4 Star Super, 5 Star' JetStar 3, JetStar 3 Super, V all with one of the following Delco distributors; 1112606, 1111715. Replaces: washer: 1914935, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Item #: 178103, Ref: ABC3007) $29.50

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Round Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.345 inch diameter round hole. If not sure, measure before ordering. Replaces: 1847646, 1847647, 1878405 (Item #: 111459, Ref: 1878405ASSY) $15.00

Electronic Ignition Conversion Kit, 12 volt negative ground - 4-cylinder engine. For M5 using Autolite IBT-40001G Distributor. Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Item #: 105090, Ref: 1542) $165.00

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 10A15098, 10A21880, 10A29435, 10A969, 169295AS, Cap: 10P326, 10P3967 (Item #: 112273, Ref: 376852R91) $11.10

No
Picture
Ignition/Light Switch - For Minneapolis Moline tractor models G705, G706, GVI, Jet Star (Orchard), Jet Star 3, M5, M504, M602, M604, SUPER 4 STAR, 4 Star, 445, Replaces Minneapolis Moline OEM number 10A7473, 4 position, 5 terminal, Without Resistor, (Item #: 173591) $17.50

$Minneapolis Moline M5 Ignition \ Light Switch, 4 Position$
Ignition / Light Switch, 4 Position - New style switch that you turn. Replaces key style switch. 7 terminal. For tractor models 2 Star, U, 445, JetStar 3, 5 Star, GVI, 4 Star, Super 4 Star, Big Mo 400, M5, M504, Big Mo 500, Big Mo 600, G705, G706, M602, M604, (M670 Gas/LP up to serial number 29901891 and diesel up to serial number 30000819. Replaces 10A23929, 10A7473, 10A25790. (Item #: 125705, Ref: 10A7473) $30.20

Ignition Tune-up Kit - For Delco Clip-Held Cap Distributor. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Includes points, rotor and condenser. For tractor models BF, RTU, Z, GB, GTB, Jet Star, Jet Star 3, 4 Star, 5 Star, UB, UTU, GVI, G705, G706, G707, G708, M5, M602, M604, BG, Big Mo 400, Big Mo 500, Big Mo 600, G, Jetstar 2, M504, Mo 500, R, RT, U, UT, ZA, ZB, ZT, 2 Star, 445. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. (Item #: 103151, Ref: ATK1DCR) $9.80

Rotor - Used with Delco distributors with a clip held cap. For models:R, 335, 445, JetStar, 4 Star, JetStar 2, JetStar 3 ( 1112606), 4 Star Super, 5 Star, M604, 2 Star, BF (1111736), BG (1111736), BIG (1111736), BigMo 400, BigMo 500, BigMo 600, GB, GTA, GTB, GTC, GVI, G, G4, G705, G706, M5, M504, M602, RT, RTE, RTI, RTN, RTS, RTU, U, UB, UBE, UBN, UBU, UT, UTC, UTE, UTI, UTN, UTS, UTU, V (1111715), Z, ZA, ZAE, ZAN, ZAS, ZAU, ZB, ZBE, ZBN, ZBU, ZT, ZTI, ZTN, ZTS, ZTU. Replaces 10P2989. (Item #: 110177, Ref: 1750498M1) $3.60

No
Picture
Spark Plug Wire Set - Like original. For tractor models Jet Star, 335, 445, M5, U302. (Item #: 179242, Ref: R6748) $39.60

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 105386A, 10A972, 72160068, K7392C, UT2421. (Item #: 121141, Ref: R7994) $12.50

Voltage Regulator - 12V - For tractor models BIG MO 400, BIG MO 500, BIG MO 600, GTB, JET STAR 3, JET STAR 4, Super JET STAR 4, JET STAR 5, M5, M504, M602, M604, SB, UB, UTI, ZAS, ZB. 12 volt voltage regulator replaces Delco numbers 1118791, MA588, 1009723M91. For Delco Generators: 1100335, 1100314, 1100350, 1100322, 1100349, 1100954, 1100328, 1100379, 1100315, 1100953. (Item #: 105588, Ref: K7786D) $33.90

Engine Bearings

Connecting Rod Bearing - .010" Oversize - Journal - For Minneapolis Moline tractor models A4T 1400, A4T 1600, G704, G705, G706, G707, G708, G900, G950, G955, G1000, G1050, G1350, GB, M5, M504, M602, M604, M670 (Super), M670 Super, UB (series), UT (series), Compatible with Oliver tractor models 2055, 2455, Replaces OEM number 10R1159, Sold per journal, Bearing Size: .010", For Standard connecting rod bearing use Item #: 107407, (Item #: 107405) $113.00

Main Bearings - .010" Oversize - Set - For Minneapolis Moline tractor models G, GB, GTB, GTC, M5, M504, M602, M604, M670, M670 Super, U, UB, UTS, 5 Star, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 107431, (Item #: 107430) $379.00

Main Bearings - .020 - For Minneapolis Moline tractor models G, M5, M504, M604, M670 (Super), M670 Super, UB, UT, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 107430, (Item #: 107431) $245.00

No
Picture
Main Bearing Set - .010 - For 5 Star, M5, M504, M602, M604, M670, Super M670 with 336 Gas Engine. (Item #: MS-531P-010) $256.30

No
Picture
Main Bearing Set - .020 - For M5, M504, M602, M604, M670, Super M670 with 336 Gas Engine. (Item #: MS-531P-020) $256.30

Main Bearings - Standard - Set - For Minneapolis Moline tractor models G, GB, GTB, GTC, M5, M504, M602, M604, M670, M670 Super, U, UB, UTS, 5 Star, Replaces Minneapolis Moline OEM number 10R535, 10B827, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 107431, (Item #: 107429) $430.00

No
Picture
Rod Bearing (4 Required) - Available in STD, .010, .020, .030 For M5, M504, M602, M604, M670, Super M670 with 336 Gas or Diesel Engine. Specify size in Comments box when ordering. (Item #: 107404, Ref: CB-591P) $137.00

Engine Gaskets

Head Gasket Set - For tractor models 5 Star, M5, M504, M602, M604, M670, Super M670 with 336 Gas and Diesel Engines. (Item #: 107472, Ref: HS8323B-1) $207.00

Oil Pan Gasket - For Minneapolis Moline tractor models G, GB, GTB, GTC, M5, M504, M602, M604, M670 (Super), M670 Super, U, UB (series), UT (series), Compatible with Minneapolis Moline Engine (s) 283, 336, 403, Replaces Minneapolis Moline OEM number 10A9130, Oil Pan Gasket Only, (Item #: 107502) $26.60

Engine Rebuild Kits

Engine Rebuild Kit - Less Bearings, 336 - For Minneapolis Moline tractor models M5, M504, M602, M604, M670, M670 Super, Compatible with Minneapolis Moline Engine (s) 336 (gas), Sleeveless engine, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 107431, (Item #: 130892) $1279.01

No
Picture
Rebore Kit - 4 5/8 Standard Bore For M5, M504, M602, M604, M670, Super M670 with 336 Gas and Diesel Engines. Contains Pistons with pins and retainers, rings. (Item #: R3454) $873.47

Engine Parts

No
Picture
Crankshaft, Remanufactured, 10A10247 - For Minneapolis Moline tractor models M5, M602, M604, M670 (gas or diesel), UB (diesel), Replaces Casting number 10A10247, 10A5099, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200597) $243.01

No
Picture
Cylinder Head, Remanufactured, 10A4202 - For Minneapolis Moline tractor models G705, G706, G900, G950, G1000, GB, GTB, GVI, M5, M504, M602, M670 (Super), M670 Super, 5 Star, Replaces Minneapolis Moline Casting number 10A4202, 10A4204, 10A4205, 10A4206, 10A4207, 10A4213, 10A4239, GE30A, GE30B, GE30C, GE30D, GE30F, GE30G, GE30H, GE30J, GE30K, GE30M, GE30N, GE30P, GE30T, GE30W, Casting No. 10A4202, 10A4204, 10A4205, 10A4206, 10A4207, 10A4213, 10A4239, GE30A, GE30B, GE30C, GE30D, GE30F, GE30G, GE30H, GE30J, GE30K, GE30M, GE30N, GE30P, GE30T, GE30W, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205514) $910.01

Cylinder Head, Remanufactured, 10A4210 - For Minneapolis Moline tractor models G705, G706, G900, G950, G1000, GB, GTB, GVI, M5, M504, M602, M670 (Super), M670 Super, Replaces Minneapolis Moline Casting number 10A4210, GE30Z, Casting No. 10A4210, GE30Z, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200532) $1200.01

No
Picture
Cylinder Head, Remanufactured, 10A4222 - For Minneapolis Moline tractor models G705, G1000 (Early, Diesel), M5, M602, M670 (Super), M670 Super, 5 Star, Replaces Minneapolis Moline Casting number 10A4222, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200535) $1000.01

No
Picture
Cylinder Head, Remanufactured, 10A4231 - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4231, Casting No. 10A4231, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205515) $1100.01

No
Picture
Cylinder Head, Remanufactured, 10A4232 - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4232, Casting No. 10A4232, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205517) $1100.01

No
Picture
Cylinder Head, Remanufactured, 10A4233 - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4233, Casting No. 10A4233, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205518) $1100.01

No
Picture
Cylinder Head, Remanufactured, 10A4240 - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4240, Casting No. 10A4240, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205516) $1100.01

Cylinder Head, Remanufactured, 11C4209, 10A4209 - For Minneapolis Moline tractor models G705, G706, G900, G950, G1000, GB, GTB, GVI, M5, M504, M602, M670 (Super), M670 Super, 5 Star, Replaces Minneapolis Moline OEM number 11C4209, Replaces Minneapolis Moline Casting number 10A4209, GE30E, 10A4203, Casting No. 10A4203, 10A4209, GE30E, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205513) $1100.01

No
Picture
Cylinder Head, Used - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4232, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205517, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405517) $550.01

No
Picture
Cylinder Head, Used - For Minneapolis Moline tractor models G705, G706, G900, G950, G1000, GB, GTB, GVI, M5, M504, M602, M670 (Super), M670 Super, 5 Star, Replaces Minneapolis Moline Casting number 10A4203, 10A4209, GE30E, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205513, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405513) $475.01

Intake Valve - For Minneapolis Moline tractor models G, G704, G705, G706, G900, G955, G1000, G1050, G1350, GB, GTB, GTC, M5, M504, M602, M604, M670, M670 Super, U, UB, UT, UTS, 5 Star, Compatible with Minneapolis Moline Engine (s) 283, 336, 403, 425, 504 (all gas engines), Replaces Minneapolis Moline OEM number 10A17913, Length: 6.67", Sold individually, (Item #: 128652) $20.30

Exhaust System

Manifold - Intake and Exhaust with elbow. For tractor models 5 Star, M5, M602, Super M670, (U late), UB. (Item #: 101642, Ref: 10A9465) $320.00

No
Picture
Manifold Gasket Set - Manifold Gasket Set. Includes manifold gaskets to head gaskets (2) only. For tractor models 5 Star, M5, M602, M670, Super M670, U, UB. (Item #: 101643, Ref: R0337G) $33.00

Muffler - Vertical exhaust inlet inside diameter 2 5/8 inch, outlet outside diameter 2 3/4 inch, overall length 32 inches. For M5, M602, M604, M670. Replaces OEM part numbers 10A16033, 10A23891, 10A15416. Use R1754 clamp, use R1804 rain cap. (Item #: 102671, Ref: R1727) $76.00

Fuel System / Air Intake

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Minneapolis Moline tractors, it is used on the following carburetors: TSX30, TSX36, TSX67, TSX68, TSX97, TSX231, TSX360, TSX400, TSX421, TSX497, TSX625, TSX633, TSX650, TSX693, TSX713, TSX714, TSX740, TSX795, TSX797, TSX814, TSX825, TSX878, TSX901, USX40, USX43. These carburetors and be found on the following models: R, U, 335, 445, 4 Star, 5 Star, JetStar, JetStar 3, U302, ZB, M604, M670, M5, BigMo 400, BigMo 500, BigMo 600, GTA, GTB, M504, M602, UB, UT, Z, ZAE, ZAN, ZAS, ZAU, ZBE, ZBU, ZTI, ZTS, ZTU, G1000, G900, RTU, UTS, GB, KT, RTN, 4 Star Super, Jetstar 3 Super, MT, RTE. Replaces 10P756, LE7021 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor Float - Use with Marvel Schebler Carbs: TSX67, TSX68, TSX624, TSX625, TSX693, TSX740, TSX795, TSX901 For MODELS: GB, GTB, GVI, U, UB, UT, UTS, 5 Star, M5, M504, M602, M604, M670 (Item #: 108451, Ref: R4012) $30.90

Carburetor Kit, Basic - Kit for Marvel TSX693, TSX740, TSX625, TSX68, TSX795, TSX901, TSX67, TSX624 carbs used on 5 Star, GVI, GB, GTB, M5, M504, M602, M604, M670, U, UB, UT, UTS. (Item #: 100735, Ref: MS103) $25.80

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX795. For the following tractor models: 335, M5. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 204399, Ref: 1814-CARB) $265.01

Fuel Filter - Used on M5, M602, M604, M670, 4 Star. This filter measures O.D.: 1-7/8 inches (47.6mm), I.D.: 23/32 inches (18.3mm), Length: 2-15/32 inches (62.7mm) Replaces 64400-DC, 64400DC, PF224 (Item #: 126044) $18.00

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 15P13. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. For the following models:R, 335, 445, JetStar, 4 Star, JetStar 3, 4 Star Super, 5 Star, M604, M670, 3 Star, BG, Big Mo 400, Big Mo 500, Big Mo 600, M5, M504, M602, RT, RTE, RTI, RTN, RTS, RTU, U, U302, U302 Super, UB, UB Special, UDLX, UT, UTC, UTE, UTI, UTS, UTU, Z, ZA, ZAE, ZAN, ZAS, ZAU, ZTI, ZTN, ZTS, ZTU. Replaces OW363, 15P14, and 41793. (Item #: 105382, Ref: 9N9162) $3.20

Precleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractor models M5, M605, 5 Star, M604, M602. Can replace Donaldson Bowl part number P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Item #: 157279, Ref: R28794) $8.20

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 15P12 (Item #: 105364, Ref: 49923D) $3.50

Gauges

Amp Gauge, Black Bezel - For tractor models G, G700, G705, G706, G707, G708, GVI, M5, M602, M604, M670, M670 Super, R, U, ZA, ZB, ZT, 335, 445, JET STAR (1938-1965). Replaces BE455A, 10A8171. This gauge has 30-0-30 range, Original Style with MM log. Fits 2 inch hole. (Item #: 107694, Ref: 30-3485560) $33.30

Amp Gauge, Chrome Bezel - This chromed bezel Amp Gauge if for tractor models G, G700, G705, G706, G707, G708, GVI, M5, M602, M604, M670, Super M670, R, U, ZA, ZB, ZT, 335, 445, JET STAR (1938-1965). Replaces BE455A, 10A8171. This gauge has 30-0-30 range, Original Style with MM log. Fits 2 inch hole. (Item #: 121630, Ref: 10A8171) $33.30

Oil Pressure Gauge - Black Bezel, Restoration Quality - For Minneapolis Moline tractor models Big Mo, G, G705, G706, G707, G708, GVI, Jet Star, M5, M602, M604, M670 Super, R, U, Z, 335, 445, Replaces Minneapolis Moline OEM number JT854, 10A7986, 30-3485471, Restoration Quality, Black Bezel, Dash Mounted, 0-50 PSI, For an economy version of this item use no. 107695, For an oil pressure gauge with a stainless steel bezel use no. 121669, (Item #: 121668) $38.70

Oil Pressure Gauge Stainless Steel Bezel, Restoration Quality - For Minneapolis Moline tractor models Big Mo, G, G705, G706, G707, G708, GVI, Jet Star, M5, M602, M604, M670 Super, R, U, Z, 335, 445, Replaces Minneapolis Moline OEM number JT854, 10A7986, 30-3485471, Restoration Quality, Stainless Steel Bezel, Dash Mounted, 0-50 PSI, For an economy oil pressure gauge with a black bezel use no. 107695, For a restoration quality oil pressure gauge with a black bezel use no. 121668, (Item #: 121669) $40.00

Temperature Gauge - This temperature gauge has a 72 inch Capillary tube, 2 inch Face Diameter, Chrome Ring with Bulb Fits. 180 degree normal temperature setting, 220 degree pegs top end. 5/8 inch UNF connector. For tractor models Big Mo 400, G705, G706, G707, G708, GTB, GTC, GVI, Jet Star 3, Jet Star 3 Super, Jet Star, M5, M504, M602, M604, M670, R, RTI, U, UTS, ZA, ZAS, ZB. Replaces: 10A21284, 10A2229, 15A9741. (Item #: 104116, Ref: 180727M91) $24.30

Lights

Healight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: R, U, 335, 445, 4 Star, 5 Star, JetStar, JetStar 2, JetStar 3, ZA, ZB, M604, M670, M5, 2 Star, A, BF, Big Mo 400, Big Mo 500, Big Mo 600, GBD, GG, GT, GTA, GTB, GTBD, GTC, HD220, HD605, HD800, M504, M602, M670 Super, RT, UB, UBD, UBE, UBED, UBN, UBND, UBU, UBUD, UDLX, UT, V, ZAE, ZAN, ZAS, ZAU, ZBE, ZBN, ZBU, ZTI, ZTN, ZTS, ZTU. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, 10P1553, 10P1701. For models BigMo 400, BigMo 500, G1000, G1050, G1350, G1355, G705, G706, G950, G955, GVI, JetStar, JetStar 3, Super Jetstar 3, M5, M602, M604, M670, 3 Star, 4 Star, 4 Star Super. (Item #: 111241, Ref: 373662R91) $10.10

Oil System

No
Picture
Oil Filter Element - For tractor models 5 Star, G900, G950, G1000 Vista, G1050, G1350, M5, M602, M604, M607, M670. (Item #: 158863, Ref: 10A10423) $18.70

PTO / Driveline

Long PTO Shaft, Used - For Minneapolis Moline tractor models M5, M504, M602, M604, 5 Star, Replaces Minneapolis Moline OEM nos 10A11211, Length: 62.5", Splines: 6/ 14, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436836) $234.01

PTO Clutch Plate, Driven - 6-9/16 inch outside diameter. For tractor models Big Mo 400, G1000, G1050, G1350, G950, Jet Star Orchard, Jet Star 3, Jet Star 4, Jet Star 5 Super, M5, M504, M602, M604, (M670 gas and LP serial number up to 29901891, diesel serial number up to 30000819). (Item #: 167368, Ref: 10P1459) $37.50

Seats

Seat Back, Black - Black vinyl on wood. For tractor models JetStar, JetStar 2, 4 Star, Super 4 Star, M5, M504, M604, G705, G706, G750, GVI, BigMo 400, BigMo 500, BigMo 600. (Item #: 178444, Ref: R6205) $60.00

Seat Cushion, Black - Black vinyl, strap-in cushion. For tractor models JetStar, JetStar 2, 4 Star, Super 4 Star, M5, M504, M604, G705, G706, G750, GVI, BigMo 400, BigMo 500, BigMo 600. (Item #: 178446, Ref: R6220) $77.00

Steering

No
Picture
Bushing - For Minneapolis Moline tractor models G1000, M5, 5 Star, Replaces Minneapolis Moline OEM number 10A1567, (Item #: 167884) $17.20

$Minneapolis Moline M5 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 13.875 inch, B= 1.375 inch, C= 1.500 inch, D= 1.375 inch. For tractor models M5, 5 Star, 602. The wheel bearing kit used on this spindle is kit part number WBKJD3. (Item #: 102693, Ref: 11B8726) $384.00

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60

No
Picture
Steering Wheel - 17-3/4 inch diameter, keyed hub, 3 covered spokes. For tractor models GVI, G705, G706, G707, G708, JetStar 3, 4 Star, Super 4 Star, M5, M504, M602, M604, M670. (Item #: 121919, Ref: 1015446M91) $106.00

No
Picture
Steering Wheel Cap - Comes with o-ring, used with 1015446M91 and 10A23441 steering wheels. For tractor models 445, 4 Star, Super 4 Star, JetStar, 5 Star, M5, M504, G705, G706, G707, G708, GVI, JetStar 3, G1000, G1050, G1350, G1355, U302, Super JetStar 3, M670, M602, M604. Replaces 10A14434, 10A22902, 10A14477. (Item #: 121918, Ref: 10A15590) $55.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Big Mo 400, Big Mo 500, Big Mo 600, G1000 Vista, G705, G706, G707, G708, G950, JetStar, M5, M504, M602, M604, M670, 335, 445, 4 Star, 4 Star Super, and 5 Star. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 35A14002, 50A5005, and GM219753. (Item #: 157780, Ref: 353435X1) $1.00

Thrust Spindle Bearing - For Minneapolis Moline tractor models G1000, M5, 5 Star, Replaces OEM number 10A9498, (Item #: 167256) $9.40

Wheels

Felt Seal - For Minneapolis Moline tractor models G1000, Jet Star 3, M5, 5 Star, 335, 445, Replaces Minneapolis Moline OEM number 10A6828, (Item #: 167683) $5.60

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $112.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 10P796. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

No
Picture
Wheel Bearing Kit - Kit contains 1 each of the following 14138A (Bearing), 14276 (Cup), 13685 (Bearing), 13620 (Cup), 10A6828 (Seal). For tractor models 5 Star, 602, 670, G1000, M5. (Item #: 100008, Ref: WBKWH3) $32.40

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A. For the following tractors: R, 335, 445, 4 Star, 5 Star, JetStar, JetStar 3, M670, M5, 3 Star, A, BF, BigMo 400, BigMo 500, BigMo 600, GTB, M602, GB, GVI, G1000 (Item #: 111560, Ref: 512581M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

No
Picture
MM Logo Decal - "Power Implement Company", 4 inch x 7 inch, printed on vinyl. (Item #: 183599, Ref: R5193) $20.20

MM Logo Decal - 1/2 inch x 1 inch, printed on vinyl. (Item #: 183054, Ref: R5238) $3.80

Electrical System

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Switch - 4-position: LEFT=accessories, CENTER=off, RIGHT accessories and ignition, FAR RIGHT start. 4 stud terminals. 7/16 inch long mounting stem with 3/4 inch dia. 2 brass keys. 1 1/8 inch mounting nut. This does not fit all models. (HA) (Item #: 109511, Ref: 782979) $19.90

$Minneapolis Moline M5 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Minneapolis Moline M5 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Minneapolis Moline M5 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Minneapolis Moline M5 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Minneapolis Moline M5 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Minneapolis Moline M5 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Minneapolis Moline M5 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

ZNL89020C.jpg - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 NPT inch thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Prairie Gold, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108378, Ref: TP520GAL) $119.00

No
Picture
Paint, Prairie Gold, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108377, Ref: TP520QT) $44.80

No
Picture
Paint, Prairie Gold, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108374, Ref: TP520SP) $9.80

No
Picture
Paint, Red, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108384, Ref: TP525GAL) $66.00

No
Picture
Paint, Red, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108383, Ref: TP525QT) $23.60

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Red, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108382, Ref: TP525SP) $10.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 10A22565, 10A27292, 10A9409, 10A9839, 11A989 (Item #: 103768, Ref: FW60166) $92.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00