FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Minneapolis Moline G750 Tractor Parts

[Categories] [All Minneapolis Moline Models] [Print]

Brakes

Brake Actuator Disc - For model G750 serial number 147569 and up. (Item #: 105800, Ref: 10P3140) $103.00

Clutch

Clutch Bearing Carrier - Non greasable. For model G750 serial number 147569 and up. (Item #: 111700, Ref: 303057364) $117.00

Clutch Disc, Remanufactured, 163935A - For Minneapolis Moline tractor model G750 (s/n 187586 - later), Compatible with Oliver tractor model 1650 (s/n 187586 - later), 1655 (s/n 187586 - later), Compatible with White tractor model 2-70, 2-78 (s/n 187586 - later), 4-78 (s/n 187586 - later), Replaces OEM number 163935A, Clutch Size: 12", Clutch Hub: 1-1/2", Clutch Spline: 19, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 204575) $134.00

Clutch Housing Tube - For model G750. (Item #: 172638, Ref: K585) $27.80

No
Picture
Clutch Kit - For Minneapolis Moline tractor model G750 (s/n 187586-earlier) Replaces Minneapolis Moline OEM number 71121058, , Compatible with Oliver tractor model 1550, 1555, 1600, 1650, 1655 Replaces Oliver OEM number 158813AS, 160971AS, , Compatible with White tractor model 2-78 (s/n 187586 - earlier), 4-78 (s/n 187586 - earlier), Replaces White OEM number 30-3065162, Diaphragm Style, Pressure Plate Size: 12", Clutch Disc Size: 12", Clutch Hub: 1-1/2", Clutch Splines: 19, Clutch Center: Spring, Clutch Type: Woven, Flywheel Step: Flat, Kit includes: Pressure Plate, Clutch Disc, Release Bearing, and Pilot Bearing, (Item #: 177072) $348.00

No
Picture
Clutch Kit, Remanufactured - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model 1650, 1655, Compatible with White tractor model 2-85, Compatible with White Construction and industrial model 2-63, Clutch Diameter - 12", Clutch Hub Diameter - 1-1/2", Clutch Splines - 19, Clutch Center - Spring, Clutch Type - 6 Large Pads, Pressure Plate Size - 12", Pressure Plate Levers - 3, Pressure Plate Springs - 12, Pressure Plate Type - Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202070) $370.01

Clutch Kit, Remanufactured - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model 1550, 1555, 1600, 1650, 1655, Compatible with White tractor model 2-70, 2-78, 4-78, Clutch Diameter - 11", Clutch Hub Diameter - 1-1/2", Clutch Splines - 19, Clutch Center - Spring, Clutch Type - 6 Regular Pads, Pressure Plate Size - 12", Conversion unit offers more plate load with less pedal effort and eliminates broken eyebolts, Includes: clutch discs, pressure plate, pilot bearing, release bearing, Pressure Plate Type - Daiphragm with Flywheel step .125", Additional Handling and Oversize Fees Apply To This Item, (Item #: 205210) $412.00

Clutch Release Fork, Used - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model 770, 880, 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955, 2050, 2150, 2255, Compatible with White tractor model 2-62, 2-70, 2-78, 2-85, 2-88, 2-105, 2-110, 2-135, 2-155, 2-180, 4-78, 4-150, 4-175, 4-180, 4-225, 160, 185, Replaces OEM number 101510A, For a new version of this item use Item #: 172793, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430533) $71.01

No
Picture
Clutch Shaft - 12.25 inches long, 19 spline. For model G750 serial number 147569 and up without hydra power or creeper drive. (Item #: 172418, Ref: 155067A) $373.00

Pressure Plate Assembly - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model 1650, 1655, Compatible with White tractor model 2-70, 2-78, 4-78, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, (Item #: 122863) $148.00

No
Picture
Pressure Plate, Remanufactured, 163934AS - For Minneapolis Moline tractor model G750 (s/n 187586 - later), Compatible with Oliver tractor model 1650 (s/n 187586 - later), 1655 (s/n 187586 - later), 1750 (Diesel, s/n 190958 - later), 1750 (Gas, s/n 190958 - 191355 and s/n 191514 - later), 1755, Compatible with White tractor model 2-70, 2-78 (s/n 187586 - later), 4-78 (s/n 187586 - later), Replaces OEM number 163934AS, 168823AS, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, Flywheel Step .125", Additional Handling and Oversize Fees Apply To This Item, (Item #: 205192) $117.00

Release Bearing Fork - Fork for Models: G1355, (G750 SN# 147569 and up), G955. Replaces 101510A. (Item #: 172793, Ref: 72160045) $153.00

Cooling System

Radiator - 2 inch inlet, 2-1/8 inch outlet may need to make hose adaptations for some tractors. For tractor models G550, G750. Replaces OEM numbers 163342AS, 163343AS, MFG0176, 163272A, 163273A, 1652570. (Item #: 111845, Ref: R5089) $558.00

Thermostat - This thermostat is 3.50 inches outside diameter and opens from 167-192 F. Used on Waukesha engines: F265GA, F265LPA, F310DBT, F310DBLT, VRG310, F283DLA, F310DL, F283GB, F283GB, F283DL, F310DB, F283DB, F265G, F265LP, 195GL, F283G, F283LP, 195DLB, F310GA, F310LPA, F310DB. Used on Oliver 1650, 1655, 1750, 1755, 1850, 1855, 1955, 99, Super 99, 950. Used one White 2-70, 2-78, 4-78. Used on Minneapolis Moline G940, G750, G850. Replaces 30-3056430, 303061272, 162492A, 106700AS, 303056430, 303056430, 303049744. (Item #: 187374, Ref: 162492A) $112.00

No
Picture
Water Temperature Sending Unit - For Minneapolis Moline tractor models G750, G1355 Replaces Minneapolis Moline OEM number 30-3032132, 30-3127486, , Compatible with Oliver tractor models 550, 1550, 1555, 1650, 1655, 1755, 1855, 2255, 2270 Replaces Oliver OEM number 30-3032132, 30-3127486, , Compatible with White tractor models 2-44, 2-62, 2-78, 4-78, 4-150, 4-180, 2255, Replaces White OEM number 30-3032132, 30-3127486, (Item #: 172693) $13.50

Drive Train

Gear, Transmission Input Shaft, Front - 19 teeth, 25 spline. For model G750 serial number 147569 and up. (Item #: 172426, Ref: 107303A) $356.00

Thrust Washer - Transmission input shaft. For model G750 serial number 147569 and up. (Item #: 173008, Ref: 155100A) $28.10

Transmission Input Shaft, Drive Collar - 25 teeth, 25 spline. For model G750 serial number 147569 and up. (Item #: 172454, Ref: 107266A) $121.98

No
Picture
Transmission Ring - For Minneapolis Moline tractor models G750, G955, G1355, Compatible with Oliver tractor models 77, 770, 880, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1955, 2055, 2150, 2255, Compatible with White tractor models 2-70, 2-85, 2-88, 2-105, 2-110, 2-150, 4-150, 4-180, Replaces OEM number 155101A, (Item #: 109372) $18.50

Electrical System

Combo Switch Lever - Used with switches AM1866T, 10A971, 1K7654A, AR20430, AA5397R, 168089A, 30-3365891. For tractor models G1355, U, UB, UTS, R, RT, RTI, RTU, Z, ZA, ZAE, ZAI, ZAS, ZAU, ZB, ZT, ZU, G750, G850, G955. (Item #: 105695, Ref: A4653R) $7.00

Condenser - For model G750. (Item #: 172639, Ref: 159770A) $10.90

Distributor - This New Distributor, with Tach Drive is complete with points, condenser, rotor and cap. It is used on Minneapolis-Moline G750. This distributor will be a direct replacement for distributors with tachometer drives. If you have a tachometer drive just below your distributor, you will have to remove the drive assembly and create a cover plate and gasket to cover the hole where the tachometer drive is removed. You will then use the tachometer drive on the distributor. This is a mechanical advance distributor. If you have a vacuum advance, you will no longer use vacuum advance. For tune up, order ATK1DCR points, rotor and condenser, and 21A443 Cap. Replaces 158859AS, 1K7324, 1111702, 1111750, 1KA7324, 101129AS, 60261-C, 60261C, 30-3417778, D2563-1AA, 156126-AS, 156126AS, 1112632, 1112603, 106106AS. (Item #: 163591, Ref: R8119) $353.00

Distributor Cap - Replaces Delco 824735. For tractor models (G706, G707, G708, G750, GVI all serial number up to 124395). Replaces 19P3031, 812627, 824735, 825409, 1867722, 1889361, 1911597, 12338674, D301, D301A, D320 (Item #: 104557, Ref: 21A443) $12.00

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 10A15098, 10A21880, 10A29435, 10A969, 169295AS, Cap: 10P326, 10P3967 (Item #: 112273, Ref: 376852R91) $11.10

$Minneapolis Moline G750 Ignition\Light Switch$
Ignition/Light Switch - 4 position, uses A4653R lever. For tractor models G1355, G750, G850, G955. (Item #: 107949, Ref: 168089A) $65.00

Rotor - For Minneapolis Moline tractor model G750 Replaces Minneapolis Moline OEM number 72161850, , Compatible with Oliver tractor model 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1850, 1855 Replaces Oliver OEM number 72161850, , Compatible with White tractor model 2-62, 2-78, 4-78, Replaces White OEM number 72161850, For models with Mallory Distributors, (Item #: 111783) $14.30

Voltage Regulator - Voltage regulator, 12-volt. For Minneapolis Moline tractors using Delco alternators Following Delco Alternators: 1100553, 1100557, 1100558, 1100566, 1100567, 1100568, 1100569, 1100570, 1100572, 1100590, 1100591, 1100662, 1100742, 1100750, 1100751, 1100778, 1100780, 1100787, 1100790, 1100791, 1100796, 1100797, 1100804, 1100810, 1100816, 1100817, 1100818, 1100834, 1100836, 1100837, 1100838, 1100839, 1100842, 1100843, 1100845, 1100846, 1100847, 1100849, 1100851, 1100856, 1100860, 1100870, 1100871, 1100875, 1100879, 1100883, 1100885, 1100886, 1100888, 1100889, 1100891, 1100892, 1100893, 1100895, 1100896, 1100905, 1100907, 1100908, 1100910, 1100916, 1100917, 1100921, 1100931, 1100932, 1100933, 1100939, 1100943, 1100944, 1100951, 1102943, 1102944, 1102945, 1119507. Replaces: 10P3009 (Item #: 105289, Ref: 1031060M91) $21.10

Engine Bearings

No
Picture
Camshaft Bearing - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model Super 55, Super 66, Super 77, Super 88, 66, 77, 88, 550, 660, 770, 880, 1550, 1555, 1600, 1650, 1655, Compatible with Waukesha Engine (s) G155, G231, G265, Compatible with White tractor model 2-44, 2-70, 2-78, Compatible with White Construction and industrial model 2-63, Replaces OEM number C330S, (Item #: 128693) $13.50

Camshaft Bearing Set - For Minneapolis Moline tractor models G750, G850, G940, Compatible with Oliver tractor models 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950, 1955, Compatible with Waukesha Engine (s) D283, D310T, G283, Compatible with White tractor models 2-70, 2-78, Replaces OEM number C614S, Sold as complete set, (Item #: 128663) $49.40

Connecting Rod Bearing - Standard - 2.437" Journal - For Minneapolis Moline tractor models G750, G850, G940, Compatible with Oliver tractor models Super 88, 88, 880, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950, 1955, Compatible with White tractor models 2-70, 2-78, 2-85, Compatible with White Construction and industrial models 2-63, 2-78, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 107415, (Item #: 107413) $16.70

Main Bearings - .010 - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model Super 88, 88, 880, 1600, 1650, 1655, Compatible with White tractor model 2-70, 2-78, 2-85, Compatible with White Construction and industrial model 2-63, Sold in complete set, Bearing Size: .010", (Item #: 107436) $288.00

Main Bearings - .010 - For Minneapolis Moline tractor models G750, G850, G940 (gas or diesel), Compatible with Oliver tractor models 1650, 1655 (diesel), 1750, 1755, 1800 (engine s/n 124), 1850, 1855 (gas/diesel), 1950 (gas), 1955 (diesel), Compatible with White tractor models 2-70 (diesel), 2-78 (diesel), 2-85, Compatible with White Construction and industrial models 2-63, Sold in complete set, Bearing Size: .010", (Item #: 107439) $135.00

Main Bearings - Standard - Set - For Minneapolis Moline tractor models G750, G850, G940 (gas or diesel), Compatible with Oliver tractor models 1650, 1655 (diesel), 1750, 1755, 1800 (engine s/n 124), 1850, 1855 (gas/diesel), 1950 (gas), 1955 (diesel), Compatible with White tractor models 2-70 (diesel), 2-78 (diesel), 2-85, Compatible with White Construction and industrial models 2-63, Replaces OEM number 105825A, 156406A, Sold in complete set, Bearing Size: Standard, (Item #: 107438) $261.00

Engine Gaskets

Conversion Gasket Set - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model 1600, 1650, 1655, Compatible with White tractor model 2-70, 2-78, Compatible with White Construction and industrial model 2-63, Engines: Waukesha 265 Gas, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 107511) $96.00

Conversion Gasket Set - For Minneapolis Moline tractor models G750, G850, Compatible with Oliver tractor models 1650 (engine s/n 187586-later), 1655, 1750, 1755, Compatible with Waukesha Engine (s) D283 (diesel), D310 (diesel), Compatible with White tractor models 2-70, 2-78, Compatible with White Construction and industrial models 2-63, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 107512) $106.00

Liner Sealing Ring Kit - For Minneapolis Moline tractor models G750, G940, Compatible with Oliver tractor models 1600, 1650, 1655, 1750, 1755, 1855, 1950T, 1955, Compatible with Waukesha Engine (s) D283, D310T, G265, Compatible with White tractor models 2-70, 2-78, 4-78, Replaces manufacturer number 223-7162, (Item #: 128590) $3.20

Oil Pan Gasket - For Minneapolis Moline tractor models G750, G850, G940, Compatible with Oliver tractor models Super 88, 88, 880, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950, 1950T, 1955, Compatible with Waukesha Engine (s) D283, D310, D310T, G232, G265, G283, G310, Compatible with White tractor models 2-70, 2-78, Compatible with White Construction and industrial models 2-63, Oil Pan Gasket Only, (Item #: 107504) $8.50

Engine Parts

Connecting Rod, Used - For Minneapolis Moline tractor model G750 (s/n 187586-later) Replaces Minneapolis Moline OEM nos 157344AS, , Compatible with Oliver tractor model 1650 (s/n 187586-later), 1655 (s/n 187586-later), 1750, 1755, 1800 (s/n 124396-later), 1850, 1855 (s/n 220000-later), 1900 (s/n 124396-later), 1950T, 1955 (s/n 220000-later), Replaces Oliver OEM nos 157344AS, Replaces Oliver Casting nos 221407, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431362) $89.01

Crankshaft Retainer, Rear - For model G750. Replaces 162508AS, 155717AS, 303142574. (Item #: 172640, Ref: 168150AS) $52.98

No
Picture
Rear Seal Retainer, Used - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model 1550 (s/n 160000-later), 1555 (s/n 160000-later), 1650 (s/n 147569-later), 1655 (s/n 147569-later), 1750 (s/n 180537-later), 1755 (s/n 220000-later), 1850 (s/n 150421-later), 1855 (s/n 220000-later), 1950T (s/n 194080-later), 1955 (s/n 220000-later) Replaces Oliver OEM number 155717A, 168150AS, 155717AS, , Compatible with White tractor model 2-70, Compatible with White Construction and industrial model 2-78 (s/n 147569-later), 4-78 (s/n 147569-later), Replaces White OEM nos 30-3142574, 168150AS, For a new version of this item use Item #: 172640, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457161) $60.01

Valve Train Kit - For Minneapolis Moline tractor model G750, (Item #: 120341) $550.00

Engine Pistons and Sleeves

Sleeve Seals, Pack of 2 - Pack of 2. O-ring for Piston Liner Sleeve. Used on G750 with 265 6 cylinder gas (Item #: 128575, Ref: 1750000M1) $9.20

Fuel System / Air Intake

No
Picture
Fuel Injection Pump, Remanufactured, 159602AS, 159602AS - For Minneapolis Moline tractor model G750 (s/n 187586-earlier) Replaces Minneapolis Moline OEM number 159602AS, , Compatible with Oliver tractor model 1650 (s/n 187586-earlier), Replaces Oliver OEM number 159602AS, Replaces Roosa Master manufacturer number DBGFC629-1DH, (Item #: 200702) $1310.01

Fuel Injection Pump, Remanufactured, 69562B, Roosa Master, DBGFC633-3AJ - For Minneapolis Moline tractor model G750 (s/n 187585-later), Compatible with Oliver tractor model 1650 (s/n 187585-later), 1655 (s/n 187585-later) Replaces Oliver OEM number 69562B, 69562D, 69562F, 69562K, , Compatible with White tractor model 2-70 (s/n 187585-later), Replaces Roosa Master manufacturer number DBGFC633-3AJ, DBGFC633-12DH, DBGFC633-21DH, DBGFC633-24DH, DBO-2754, (Item #: 200703) $1310.01

Injection Line, Nbr 1 Cylinder - For model G750 serial number 147569 to 187585. (Item #: 162700, Ref: 163471AS) $14.98

Injection Line, Nbr 2 Cylinder - For model G750 serial number 147569 to 187585. (Item #: 162701, Ref: 163472AS) $28.90

Injection Line, Nbr 3 Cylinder - For model G750 serial number 147569 to 187585. (Item #: 162701, Ref: 163473AS) $28.90

Injection Line, Nbr 4 Cylinder - For model G750 serial number 147569 to 187585. (Item #: 162702, Ref: 163474AS) $31.80

Injection Line, Nbr 5 Cylinder - For model G750 serial number 147569 to 187585. (Item #: 162703, Ref: 163475AS) $32.00

Injection Line, Nbr 6 Cylinder - For model G750 serial number 147569 to 187585. (Item #: 162704, Ref: 163476AS) $28.00

Gauges

Ammeter Gauge - For model G750. Replaces 158583A (Item #: 110408, Ref: S.53141) $27.10

Amp Meter Gauge, Used - For Minneapolis Moline tractor model G750 Replaces Minneapolis Moline OEM number 158583A, , Compatible with Oliver tractor model 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2150 Replaces Oliver OEM nos 158583A, , Compatible with White tractor model 2-62, 2-78, 4-78, Replaces White OEM nos 158583A, For a new version of this item use Item #: 110408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410408) $15.01

Fuel Gauge - 12 volt negative ground. For model G750. Replaces 155558A. (Item #: 107692, Ref: S.53143) $31.70

Fuel Gauge, Used - For Minneapolis Moline tractor model G750 Replaces Minneapolis Moline OEM number 155558A, , Compatible with Oliver tractor model 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150 Replaces Oliver OEM nos 155558A, , Compatible with White tractor model 2-62, 2-78, 4-78, Replaces White OEM nos 155558A, For a new version of this item use Item #: 107692, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 407692) $18.78

No
Picture
Tachometer Cable - This 56 inch long cable, threaded ends are 5/8-18 x 7/8-18, one Keyed and one Square end. For models G550 and G750, both with gas engines. (Item #: 110181, Ref: AM3131T) $37.30

Tachometer, Speedomeer, Used - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model 1650, 1655, Compatible with White tractor model 2-78, 4-78, Replaces White OEM nos 158390A, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497053) $147.01

Temperature Gauge - 12 volt negative ground. For model G750. Replaces 155557A, 30-3031659. (Item #: 110407, Ref: S.53142) $32.40

Temperature Gauge - Stainless Steel Bezel - For Minneapolis Moline tractor models Big Mo, Big Mo 500, G, G704, G705, G706, G707, G708, G750, GB, GTA, GTB, GTC, GVI, Jet Star, Jet Star 3, Jet Star 3 Super, R, RT, RTI, RTN, Super 4 Star, U, UB, UTS, Z, ZA, ZAE, ZAN, ZAS, ZAU, ZB, ZBE, ZBN, ZBU, 4 Star, 5 Star, 335, 445, Replaces Minneapolis Moline OEM number 10A2229, 10A2794, 30-3485587, Stainless Steel Bezel, Has MM logo, Capillary Length: 72", 5/8-18 UNF end with 1/2" NPT pipe bushing, Fits 2" opening, Restoration Quality, For Temperature Gauge with Black bezel use Item #: 107693, (Item #: 110185) $19.98

Temperature Gauge, Used - For Minneapolis Moline tractor model G750, Compatible with Oliver tractor model 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, Compatible with White tractor model 2-62, 2-78, 4-78, Replaces OEM number 155557A, 30-3031659, For a new version of this item use Item #: 110407, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410407) $17.26

Water Temperature Sending Unit - The part may come with a spade terminal which might require changing your wire end. For tractor models G1355, G750.303485544 (Item #: 128314, Ref: D5NN10884A) $10.20

Hitch / Drawbar

No
Picture
Pivot Ball Retainer - For Minneapolis Moline tractor models G750, G955 Replaces Minneapolis Moline OEM number 104592A, , Compatible with Oliver tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955 Replaces Oliver OEM number 104592A, , Compatible with White tractor models 2-62, 2-70, 2-85, 2-88, 2-110, Compatible with White Construction and industrial models 2-78, 4-78, Replaces White OEM number 104592A, Category II, (Item #: 173582) $53.00

Sway Block, LH - For model G750 SN# 206824 and up. (Item #: 172786, Ref: 167570A) $83.00

No
Picture
Top Link Assembly - For Minneapolis Moline tractor model G750 (s/n 147569-later) Replaces Minneapolis Moline OEM number 101435A, 101436A, 101437A, 101439A, 108070A, , Compatible with Oliver tractor model Super 66, Super 77, 66, 77, 660, 770 (s/n 60501-later), 880 (s/n 60501-later), 1550, 1555, 1650 (s/n 147569-later), 1655 (s/n 147569-later) Replaces Oliver OEM number 101435A, 101436A, 101437A, 101439A, 108070A, , Compatible with White tractor model 2-62, 2-70, Compatible with White Construction and industrial model 2-78 (s/n 147569-later), 4-78 (s/n 147569-later), Replaces White OEM number 101435A, 101436A, 101437A, 101439A, 108070A, Cat I and II, Assembly comes with Cat II end with bushing to be used if needed to fit Cat I implements, (Item #: 173465) $245.00

No
Picture
Top Link Turnbuckle - For Minneapolis Moline tractor model G750 (s/n 147569-later) Replaces Minneapolis Moline OEM number 101435A, , Compatible with Oliver tractor model Super 66, Super 77, 66, 77, 660, 770 (s/n 60501-later), 880 (s/n 60501-later), 1550, 1555, 1650 (s/n 147569-later), 1655 (s/n 147569-later) Replaces Oliver OEM number 101435A, , Compatible with White tractor model 2-62, 2-70, Compatible with White Construction and industrial model 2-78 (s/n 147569-later), 4-78 (s/n 147569-later), Replaces White OEM number 101435A, (Item #: 173573) $89.00

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 10P2645 (Item #: 111242, Ref: 28A116) $14.00

Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250) $25.20

PTO / Driveline

PTO Clutch Plate, Driven - For model G750. (Item #: 111893, Ref: 159097A) $16.10

PTO Clutch Plate, Driven - 6.00 inch outside diameter, 4.255 inch inside diameter. For model G750. (Item #: 111892, Ref: 105650A) $181.00

PTO Clutch Spider - For model G750 serial number 147569 and up. (Item #: 172637, Ref: 163297A) $392.00

PTO Shaft, 540 RPM - 23 spline. For model G750 serial number 147569 and up. (Item #: 116894, Ref: 158287A) $197.00

Seats

Seat Back, Black - Black vinyl on wood. For tractor models JetStar, JetStar 2, 4 Star, Super 4 Star, M5, M504, M604, G705, G706, G750, GVI, BigMo 400, BigMo 500, BigMo 600. (Item #: 178444, Ref: R6205) $60.00

Seat Cushion, Black - Black vinyl, strap-in cushion. For tractor models JetStar, JetStar 2, 4 Star, Super 4 Star, M5, M504, M604, G705, G706, G750, GVI, BigMo 400, BigMo 500, BigMo 600. (Item #: 178446, Ref: R6220) $77.00

Sheet Metal / Body Parts

Battery Clamp Kit - This Kit includes Clamp, J-Bolts, and Nuts. Replaces 157011A, 108021A (Item #: 187376, Ref: 157011A) $28.50

Steering

Center Steering Arm, Used - For Minneapolis Moline tractor model G750 (Row Crop s/n 147569-later) Replaces Minneapolis Moline OEM number 30-3045633, , Compatible with Oliver tractor model 1550 (regular tread s/n 160000-later), 1555 (regular tread s/n 160000-later), 1650 (Row Crop s/n 147569-later), 1655 (Row Crop s/n 147569-later), 1755 (regular tread s/n 220000-later), 1855 (Row Crop s/n 220000-later), 1955 (Row Crop s/n 220000-later), 2255 (s/n 235650-later) Replaces Oliver OEM nos 30-3089991, 30-3045633, , Compatible with White tractor model 2-62, 2-70, 2-78, 2-85 (s/n 263341-271719), 2-105 (s/n 255216-271913), 4-78, Replaces White OEM nos 30-3045633, Splines: 6, For use with small tie rods, For a new version of this item use Item #: 105239, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405239) $169.01

Tie Rod Tube - A= 19.56 inch, B= 11/16 inch inside diameter, 18 right hand thread. For model G750. (Item #: 172501, Ref: K6958A) $29.90

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

No
Picture
MM Logo Decal - "Power Implement Company", 4 inch x 7 inch, printed on vinyl. (Item #: 183599, Ref: R5193) $20.20

MM Logo Decal - 1/2 inch x 1 inch, printed on vinyl. (Item #: 183054, Ref: R5238) $3.80

Electrical System

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Switch - 4-position: LEFT=accessories, CENTER=off, RIGHT accessories and ignition, FAR RIGHT start. 4 stud terminals. 7/16 inch long mounting stem with 3/4 inch dia. 2 brass keys. 1 1/8 inch mounting nut. This does not fit all models. (HA) (Item #: 109511, Ref: 782979) $19.90

$Minneapolis Moline G750 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Minneapolis Moline G750 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Minneapolis Moline G750 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Minneapolis Moline G750 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Minneapolis Moline G750 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Minneapolis Moline G750 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Minneapolis Moline G750 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

ZNL89020C.jpg - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 NPT inch thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Prairie Gold, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108378, Ref: TP520GAL) $119.00

No
Picture
Paint, Prairie Gold, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108377, Ref: TP520QT) $44.80

No
Picture
Paint, Prairie Gold, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108374, Ref: TP520SP) $9.80

No
Picture
Paint, Red, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108384, Ref: TP525GAL) $66.00

No
Picture
Paint, Red, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108383, Ref: TP525QT) $23.60

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Red, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108382, Ref: TP525SP) $10.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 10A22565, 10A27292, 10A9409, 10A9839, 11A989 (Item #: 103768, Ref: FW60166) $92.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00