FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ferguson TO-30 Tractor Parts

[Categories] [All Ferguson Models] [Print]

Brakes

Brake Adjuster Assembly - Brake Adjuster Assembly. This part measures 4 1/4 inches at it's shortest length, fully screwed together. If you need a shorter one, the threaded side can be cut to make a shorter piece. Also can replace early type brake adjusters. Fits TEA20, TEF20, TO20, TO30, TO35, FE35, 165 UK, 178, 240, 50F, 50H, 60H, 35 UK. Replaces 1850213M91. (Item #: 166242, Ref: 1850213M91) $23.80

Brake Drum Retaining Screw - This Brake Drum Retaining Screw Measures 1/2 -13 NC x 3/4 inches. Four are used per tractor, sold individually. If you order 1, you are only going to get one screw. It is used on the following with shoe style brakes: 2200, 2135, 3165, 20C, 20D, 30, FE35, TE20, TEA20, TO20, TO30, F40, TO35, 130, 20, 202, 204, 35, 135, 148, 150, 230, 231, 240, 245, 340, 35, 50, MH50, 550. It is used with 827707M5 Break Drum. Replaces: 182278M1, TO1127. (Item #: 125739, Ref: 182278M1) $2.10

Brake Pin Kit - Brake Pin Kit to service your brakes. For models TO20, TO30, TE20, 135 UK, 165 UK, 175 UK, 178, 20D, 231, 240, 240P, 240S, 35, 35X, 50F, 50H, 60H. (Item #: 105640, Ref: 1810029M91) $4.98

Brake Shaft, Bushing - 1-3/8 inch x 1-1/2 inch x 1-7/16 inch. For tractor models TE20, TO20, TEA20, TO30, TO35, FE35, F40, 1080, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 35, 50. (Item #: 150915, Ref: 180801M1) $8.00

Brake Shoe Set - Complete set of 4 brake shoes with bonded linings for models TO20 and TO30. (Item #: 105624, Ref: 830537M93) $58.00

Clutch

Clutch Alignment Tool - Clutch alignment tool for 1 3/8 inch 10 spline disc and .67 inch pilot hole. For tractor models: TO20, TE20, TEA20, TO30, TO35. (Item #: 119892, Ref: 1112-5996) $11.70

Clutch Alignment Tool - Clutch alignment tool for 5/8 inch Pilot, 1st stage 1 1/8 inch with 10 splines, 2nd stage 1 3/4 inch with 10 splines. (Item #: 114714, Ref: 1212-1600) $22.10

No
Picture
Clutch Alignment Tool - Clutch alignment tool for dual clutch measuring 1 1/8 inch with 10 splines, 1 5/8 inch with 10 splines and 3/4 inch pilot hole. Used for model TO30. (Item #: 113942, Ref: 1712-7071) $22.80

Clutch Disc - Clutch disc measuring 9 inches with a 1 3/8 inch hub and 10 splines. This is a 6 spring clutch. For the following tractors using Continental Gas engine: TE20, TEA20, TO20, TO30, 202, 203, 205, 20C, 50C. Replaces OEM 180241M91. (Item #: 111601, Ref: 91A7550WHD) $29.10

Clutch Disc, 9 Inch - Clutch disc is 9 inches in diameter with 10 splines on a 1 1/8 inch hub. Used on models 135, 2135, 35, 50, TO35, TE20, TEA20, TO20, TO30, Colt, Mustang, Massey Harris 22, Massey Harris 30 with single clutch. Replaces 760260M91, 180241M91, 180250M91, 181114M91, 193621M91, 825495M91 (Item #: 119397, Ref: A44512) $60.00

Clutch Disc, Remanufactured, 180241M91 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, Compatible with Massey Ferguson Construction and industrial models 202, 203, 2135, Replaces Massey Ferguson OEM number 180241M91, 180250M91, 181114M91, 183357M91, 193621M91, 825495M91, Clutch Size: 9", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206747) $116.00

Clutch Disc, Remanufactured, 180241M91 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, Replaces Massey Ferguson OEM number 180241M91, 180250M91, 181114M91, 183357M91, 193621M91, 825495M91, Clutch Size: 9", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206760) $105.01

Clutch Disc, Remanufactured, 184542M91 - For Massey Ferguson tractor models TO30, 35, 50 (s/n 515433 - later), 65, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 2200, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 302, 2135, 3165, Replaces Massey Ferguson OEM number 184542M91, 185892M94, 193141M91, 516068M91, 516068M93, 890302M91, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206741) $114.01

Clutch Kit - Clutch Kit contains 181114M91 drive disc that measures 9 inch outside diameter with 1 1/8 inch 10 spline hub, 183209M91 9 inch single pressure plate, 832960M3 pilot bearing, and 195207M1 release bearing and 10 spline x 1 1/8 inch pilot tool. Will not fit on input shaft with 1 3/8 inch 10 Spline end. Note: for TO35 see part number 833085M2 bearing, you may need kit 184827. Replaces 1800263M91, 180263M91, 181114M91. (Item #: 119387, Ref: 1212-1610) $171.00

Clutch Kit - Our new 9 inch complete clutch kit contains: a 9 inch 3 finger, 6 spring pressure plate assembly (183209M91), a 9 inch, 10 spline, 1 3/8 inch hub clutch disc (180250M91), new release bearing (195508M1), new pilot bearing (828123M2), and clutch alignment tool. For tractor models 135, 2135, 35, 50, MH22, MH22K, TE20, TEA20, TO20, TO30. (Item #: 113484, Ref: 1212-6001) $166.00

No
Picture
Clutch Kit, Remanufactured, 516068M93 - For Massey Ferguson tractor models F40, TO30 (S/N 177395-177519 and S/N 177538-later), TO35 (S/N 177395-177519 and S/N 177538-later), 35 (S/N 245087-later), 50, 65, 135, 150, 2135, Compatible with Massey Ferguson Construction and industrial models 20 (IND S/N DC2061-later), 202, 203, 302, 304, Replaces Massey Ferguson OEM number 516068M93, 526665M91, Clutch Diameter - 11", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Solid Offset, Clutch Type - Woven, Pressure Plate Size - 11", Pressure Plate Levers - 3, Pressure Plate Springs - 9, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 10, For a New version of this sku use Item #: 122859, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202053) $410.01

Clutch Release Bearing Spring - Two used per tractor, sold individually. .627 inch outside diameter, 4.875 inch overall length and .095 inch wire diameter. For tractor models: TE20, TEA20, TO20, TO30. Replaces TO7562, 181622M1. (Item #: 121564, Ref: 9N7562) $6.30

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.00

Clutch Release Throw Out Bearing - Greaseable - Compatible with Massey Ferguson Tractor(s) TE20, TEA20, TO20, TO30. Replaces Massey Ferguson OEM nos 195207M1, 831788M1 (Item #: 113482) $19.10

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 50, 135, 202, 203, 2135, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206882) $95.01

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models TO30, TO35, 35, 50, 65, 135, 150, 202, 203, 302, 304, 2135, 2200, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, (Item #: 206883) $240.01

Pressure Plate Assembly, Remanufactured, 180263M91 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, 202, 203, 2135, Replaces Massey Ferguson OEM number 180263M91, 185923M91, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 119390, (Item #: 206881) $111.01

Pressure Plate Assembly, Remanufactured, 184543M91 - For Massey Ferguson tractor models TO30, TO35, 35, 50, 65, 135, 150, 202, 203, 302, 304, 2135, 2200, Compatible with Massey Ferguson Construction and industrial models 40, Replaces Massey Ferguson OEM number 184543M91, 193931M92, 512356M91, 526665M91, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, For a New version of this sku use Item #: 122859, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206884) $259.50

Pressure Plate Cover Assembly, 9 inch single - Pressure Plate Assembly - 9 inch single. (Rockford) For the following tractors using Continental Z120, Z129 or Z134 engines: MF 135, 205, 20C, 2135, 35, 50, 72, 82, F40, MH20, MH30, TO20, TO30, TO35. (Item #: 119390, Ref: 180263M91) $155.00

Release Bearing - Release bearing for tractor models 101 Jr and Sr, 135 Special, 20, 201, 202, 203, 203G, 205, 20C, 2135, 298, 303D, 303G, 35, 44, 44D, 44K, 44LP, 50, 50C, 510, 540, 550, F40, MH20, MH30, TE20, TEA20, TO20, TO30. Transmission disc release bearing. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces original part numbers 18171A, 195207M1. (Item #: 107007, Ref: N1087) $21.00

Cooling System

Fan, 6 Blade - 15.250 inch diameter, 1.0625 inch pilot hole, 1.750 inch bolt hole center to center. For tractor models 150, 202, 204, 2200, 35, 50, TE20, TO20, TO30, TO35. With Continental Gas Engine. (Item #: 121690, Ref: 181522M91) $64.00

Fan Belt - This Fan Belt measures 40.5 inches by 0.875 inches. For TE20, TO20, TO30, Please verify measurements before ordering (Item #: 119093, Ref: 181636M1) $19.30

Fan Blade - This fan is 4 blade, 15 inch diameter, 1 1/16 inch pilot hole. For Continental Gas Engine models 135, 150, 202, 204, 2200, 35, 50, TE20, TO20, TO30, TO35. (Item #: 121691, Ref: 181522M91-4) $59.00

Gasket, support to water pump body - Tractors: TO20 and TO30. Price is for 1 gasket. (Item #: 153383, Ref: 1750296M1) $0.90

Gasket, Thermostat Body - For tractor models TO20, TO30, TO35, MF35. (Item #: 173218, Ref: 181528M1) $0.78

Hose Clamp - This hose clamp is used as a radiator hose and a air cleaner hose. It fits hoses with an outside diameter 1 3/4 inches to 2 inches. Check hose diameter before ordering. (Item #: 178164, Ref: 608287) $3.80

Radiator - For tractor models TE20, TEA20, TO20, TO30, Z120, Z129, Z134 gas engines. Will fit the late TO35 after serial number 204182. This radiator has 5 fins per inch and 3 rows of tubes. It is 17.312 inches tall and the core size is 15.062 inches wide. This radiator fits multiple Massey Ferguson Tractor models. (NOTE: replaces VPE3033, 181623V1) Top mounting bracket is centered. Uses cap part number 180224M91. (Item #: 101791, Ref: 181623M1) $200.00

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. Replaces 184528M1, 184528M91, 184528M1. Fits 135, 150, 165, 175, 180, 235, 240, 255, 35, 50, MH50, 65, 85, 88, TO20, TO30, TO35. (Item #: 112331, Ref: 180224M91) $6.60

Radiator Hose, Lower - For tractor models TO20, TO30, 1.85 inch outside diameter, 1.50 inch inside diameter, 13.50 inches long. For 204, 205, 30, 304, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E. (Item #: 114891, Ref: 180145M1) $13.60

Radiator Hose, Upper - 5 1/2 inches long and 1 1/2 inches diameter. For tractor models TE20, TO20, TO30, TO35, F40, (50, 65 with Continental Engine), (35, 50, with Perkins Diesel), (135 with Perkins Gas or Diesel), (230 serial number 243032 and up), (235 with Perkins Diesel), 20, 2135, 50, 2500 gas Z120, Z129, Z134. PLEASE NOTE: You may receive a longer piece up to 8 1/2 inches long and you can cut-to-fit. (Item #: 110453, Ref: 180085M1) $6.00

Thermostat - This thermostat is 160 degree lo-temperature. For tractors models TE20, TO20, TO30. Fits in upper radiator hose with the pointed end towards the front of the tractor. Thermostat is 2.250 inches long. Replaces 181634M1, B2NN8575A, 9N8575A3 (Item #: 109513, Ref: B2NN8575A) $20.20

Upper Radiator Hose - New upper radiator hose with an inside diameter of 1.532 inch and 8.625 inch in length. This radiator hose fits multiple Massey Ferguson Tractor models. (Item #: 134505, Ref: 182345M1) $8.40

Upper Water Outlet Elbow - This Upper Water Outlet Elbow is used on Ferguson TE20, TO20 and TO30 Tractors. Does not come with gasket. This upper water outlet elbow is also the front fuel tank mount.``Our elbow has the threaded hole for the UTG50 water temperature gauge probe. Order 181528M1 gasket if needed. Replaces 181635M1, TO8603 (Item #: 182973, Ref: 181635M1) $96.00

Water Pump Housing to Block Gasket - Used on Continental Engines, this gasket goes between the water pump housing and engine. Used on Massey Ferguson models: 20C, 202, 204, 2135, 30B, TE20, TO20, TO30, TO35, 135, 150, 230, 235, 245, 35, 50 (Continental Gas only) (Item #: 173646, Ref: 1750077M1) $2.30

Water Pump Pulley - For tractor models TE20, TO20, TO30 all with CONTINENTAL and STANDARD Engine. Pulley end 3-7/8 inch diameter, length 2-1/2 inch, bolt end 2-5/8 inch, 4 bolt 1-3/4 inch center to center across, pilot hole 1-1/16 inch. (Item #: 116875, Ref: 1750300M1) $70.00

Water Pump, Remanufactured, Z120K305 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, Replaces Massey Ferguson Casting number Z120K305, Includes mounting gasket, (Item #: 206974) $104.01

Water Pump without pulley - For tractor models TO20, TO30, TE20 with Z120 and Z129 Engines. Replaces 830862M91R, 120113N. Casting numbers P133, P113, 120K305. (Item #: 101969, Ref: 830862M91) $42.50

Decals and Emblems

Decal Set, TO30, Vinyl - For Massey Ferguson tractor model TO30 (pair), Vinyl decals, (Item #: 102539) $23.70

Front Hood Emblem - For tractor models TO20, TE20, TEA20, TO30. Front Hood Emblem. Chrome with blue background "Ferguson-Rectangle". (Item #: 104109, Ref: R1967) $29.70

Hood Side Emblems - For TO30. Hood side emblems. Chrome Ferguson-30 . Comes in package of 2, (right and left side of hood). May require 2 x 1/8th inch holes be drilled into hood. (Item #: 104112, Ref: R1966) $61.00

Drive Train

Ferguson TO30 6 Speed Transmission Selector and Related Parts

6 Speed Transmission Selector and Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. *Do not put this part in basket. You must call for application, identification and availability.

NOTE

Axle Bearing Assembly - 2.00 inch inside diameter. For tractor models: TE20, TEA20, TEF20, TO20, TO30. Assembly includes Cup (3720) and Cone (3795). Replaces 195162M1. (Item #: 179813, Ref: S.18516) $48.00

Axle Collar - This axle collar measures 2 3/4 inches outside diameter, 2 inches inside diameter and 11/16 inches thick. For tractor models TO20, TEA20, TEF20, TED20, TO30. Replaces 181257M1, 181257V1, 890543M1. (Item #: 112070, Ref: 9N4132) $11.20

Axle Shim - This is a Steel Rear Axle Shim. It is .020 inches thick. It is used on Ferguson TEA20, TE20, TEF20, TO20, TO30, TO35, F40, Massey Harris 50, Massey Ferguson 35, 35 UK, 50, 135, 135 UK, 150, 230, 231, 235, 240, 245, 3165, 20, 202, 204, 2135, 20C, 20D, 30. It replaces original part number 183261M1. (Item #: 178176, Ref: 183261M1) $3.60

Bearing Cone - Rear Axle, Outer. 2.0 inch I.D. 1.1930 WIDTH, 0.140 RADIUS. For TO20, TO30 (Item #: 109578, Ref: 195162M1) $49.00

Bearing Cup - Double tapered cup (53376D) for differential. For tractors: TE20, TO20, TO30, TO35 prior to serial number 169467 MF35, MF50 using sleeve number 181251M91 also MF65 to serial number CL2686121 MF135, MF150, MF165, MF175, MF180. (Item #: 180440, Ref: 181251DTC) $341.00

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $30.40

Bearing Cup, Rear Axle, LH Inner - This Left Hand Bearing Cup measures 4.438 inch outside diameter and .938 inch width. Fits models 135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF50, MF65, TO20, TO30, TO35. (Item #: 116984, Ref: 195160M1) $18.70

Bearing Cup, Rear Axle, Outer - 3.6718" O.D, .9375" width, .1250" radius. For tractor models MF1100, MF1105, MF1130, MF1135, MF1150, TO20, TO30. (Item #: 109579, Ref: 831363M1) $9.70

Differential Bearing and Cup - Fits in Differential Lock. Bearing and cup is used on multiple Massey Ferguson Tractors. Replaces original part numbers: 1850087M91, 1850087M92, 1851533M91, 1851533V91, 185773M1, 185775M1, 185776M1, 1857775M1, 1857776M1, 195159M1, 195159V1, 195160M1, 195160V1, 300975M1. (Item #: 179801, Ref: 195159M1) $28.90

Gasket, Rear Axle Trumpet Housing - Size is approximately 15-1/4 inches. Fits TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 180, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 2500, 30, 31, 3165, 35, 40, 50, 50, 65. (Item #: 151916, Ref: 183254M1) $4.30

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $1.98

Gear Shift Boot - For tractor models TE20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, Super 90, 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 285. Top Hole 1/2 inch. Bottom hole 1 1/2 inch. Replaces 180579M4, 180579M3, 108579M3, 520858M1, 237461 (Item #: 114031, Ref: 520858M1) $3.10

No
Picture
Gear Shift Knob - Round ball, 3/8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35. (Item #: 150683, Ref: 180006M91) $4.00

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Oil Seal, Rear Axle, Inner - OIL SEAL For TO30, TO20, TEF20, TED20, TEA20. This is an inner oil seal for the rear axle. Measures 2 inches x 2 7/8 inches x 0.468 inch. (Item #: 167308, Ref: 195555M1) $8.70

Oil Seal, Rear Axle, Outer - 2-3/8 inch inside diameter, 3-1/2 inch outside diameter, 5/8 inches thick. For tractor models TO20, TO30, TEF20, TED20, TEA20, TE20. This is an outer oil seal for the rear axle. Replaces 890640M1, 195557M1, 195557V1. (Item #: 126593, Ref: D6NN4251A) $6.20

Rear Axle Housing Gasket, Outer - For tractor models TO20, TO30, TO35. Replaces 181232M1. Used for seal between bearing retainer and axle housing or backing plate. Thickness 0.016 inches. (Item #: 153608, Ref: 9N4130) $1.00

Ferguson TO30 Rear Differential and Related Components

Rear Differential and Related Components - Please use diagram to match parts to tractor models. Parts must be ordered by phone. (SPA)

NOTE

Shift Lever Locking Pin - This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Item #: 183009, Ref: 1678440M1) $1.40

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $0.80

Transmission Bearing - This is a Transmission Main Shaft Rear Bearing for the Input Shaft. Used on TE20, TEA20, TO20, TO30. Replaces: 195746M1, S9836 (Item #: 118284, Ref: 9N7120) $97.00

Transmission Fill Plug - For tractor models TE20, TEA20, TO20, TO30, 35, 40, 50, 135, 231, 240, 250 2135. Replaces 768300M1, 180580M1 and 3799441M2. Plug has a 2.3 inch outside diameter flange. (Item #: 115163, Ref: 9N7010) $6.30

Transmission Input Shaft Seal - This seal fits the following tractor models as a transmission input shaft seal: TE20, TEA20, TO20, and TO30. Replaces part number 195760M1. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide. (Item #: 109957, Ref: 8N7052A) $8.40

Transmission Rear Axle Gasket - This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $6.90

Electrical System

12 Volt Conversion Kit - 12 volt conversion for TO30 ONLY. (Includes alternator with built-in regulator, 12 volt resistor, wiring harness, brackets and instructions). (Item #: 107098, Ref: TO30ALT12V) $187.12

Alternator Base Bracket - Alternator Base bracket used in 12 volt conversion kit. Mounts to block with 3 1/2 inches center-to-center mounting bolt holes, for model TO30. Hardware kit available as part number HDW9302. (Item #: 164216, Ref: GFD9309) $7.50

Alternator Hardware Kit - Hardware for brackets in 12 volt conversion kits. For tractor models TO20, TO30. (Item #: 178123, Ref: HDW9302) $14.20

Alternator Top Bracket - Adjustable top bracket used in 12 volt conversion kit. For model TO30. Hardware kit available as part number HDW9302. (Item #: 164217, Ref: GFD9310) $5.00

Battery Cable - Cable, starter switch to starter. Tractors: TO20, TO30. 16 inches long. (Item #: 115783, Ref: 180099M91) $10.00

Battery Cable - Cable, battery to switch. For tractors: TE20, TO20, TO30 battery to ground for tractors: MF85, 88 gas. 21 inches long, 2 gauge. For 204, 205, 30, 304, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E. Replaces OEM number 180166M92. (Item #: 172373, Ref: 9N14300C) $19.80

Battery Cable Ground Strap - For: TE20, TO20, TO30, TO35. 7 inches long. Replaces 180165M91. (Item #: 115790, Ref: D1NN14301H) $12.30

Coil, Ignition 6V - Coil for Delco Distributor with clip held cap. For 202, 204, 20, 26, 27L, 27, 302, 303, 304, 34, 356, 35, 402, 404, 60, 70, 72, 80, 82, 90, 92, MF35, MF50, MF65, MF85, MF88, MH50, Super 92, Super 90, TO20, TO30, TO35. Replaces 1024481M91. (Item #: 105281, Ref: D4PE12029AA) $15.00

Control Box, 12 Volt - Control box is for tractors with a generator and Standard Motor gas engines. Replaces OEM numbers: 829951M91, 1050840M91. For tractor models 20E, 240, 275UK, 283UK, 290UK and TE20, TEA20, TO20, TO30, TO35. (Item #: 172665, Ref: 1890130M91) $61.00

Distributor - A complete distributor that comes with cap, points, rotor and condenser. It has a 9 tooth shaft gear. For tractor models TO20, TE20 with Continental Engine, TO30, TO35, 35 (to serial number 245932), F40, 50 to serial number 536248. (Serviceable for: 135, 202, 204, 2135, 2200 (early with 1112643 distributor and Z134 engine). Replaces 1111722, 1111740, 1112557, 1112570, 1112586, 181544M91, 181685M91, 181686M91, 182852M91, 829856M9. (Item #: 152856, Ref: 182852M91-TP) $135.65

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models TO20, TO30, TO35, 35, 202, 204, 302, 304, 50, 65, 85, 88, Super 90. Replaces 811735 Delco and 1750411M1. (Item #: 104554, Ref: 1750411M91) $8.70

Distributor Dust Cover - Dust Cover for Delco Distributor with Clip Held Cap. For 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35. Replaces 1750491M91. (Item #: 103153, Ref: 1900119) $9.00

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. fits tractor models F40, 202, 204, 40, Super 90, 85, 88, TO20, TO30, TO35, 302, 304, 35, 50, 65, 95, 97 with one of the following Delco distributors: 1112557, 1112570, 1112585, 1111722, 1111737, 1111740, 1112583, 1112589. Replaces: washer: 1750412M1, bushing: 1750499M1, shim washer: 1750406M1, 1025008M1 (Item #: 178103, Ref: ABC3007) $29.50

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Massey Harris 92 Combine, Massey Harris 50. Ferguson F40, TO30, TO35, 202, 204, 302, 304, 356, 50, 65, 85, 88, 95, 97, Super 90, 35. Replaces: 1750513M1, 1750514M1, 1750520M1, 22303X, 353444XL, 354119X (Item #: 111468, Ref: 1904376) $14.40

Electronic Ignition Conversion Kit, 12 volt negative ground - Fits TO20, TO30, TO35, 50, MH50, 65 : - For TO20 with Continental Z120 engine and Delco distributor. TO30 with Continental Z129 engine and Delco 1111740 distributor, TO35 and MH50 with Continental. Z129 or Z134with Delco distibutor 1112557 or 1112570, TO35, 35 and 50 with Continental Z134 and a Delco 1112570, 1112585 or 1112385 distibutor, 65 with Continental G176 engine and a Delco 1112583 or 1112589 distributor. Also fits aftermarket ATL-55-1200. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For counter clockwise distributors with clip type cap. For use on 12 volt negative ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 113775, Ref: 1143) $154.00

Electronic Ignition Conversion Kit, 6 volt positive ground - For TO20 with Continental Z120 engine and Delco distributor including Delco distributor 1112618. TO30 with Continental Z129 engine and Delco 1111740 distributor, TO35 and MH50, 50 with Continental. Z129 or Z134with Delco distibutor 1112557, 1111722 or 1112570, TO35, 35 and 50 with Continental Z134 and a Delco 1112570, 1112585 or 1112385 distibutor, 65 with Continental G176 engine and a Delco 1112583 or 1112589 distributor. Also fits aftermarket ATL-55-1200. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For counter clockwise distributors with clip type cap. For use on 6 volt positive ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 113774, Ref: 1143P6) $170.00

Generator, 6 Volt, Rebuilt - Pulley not included. For tractor models TO30, TO35 1951 to 1955. This Generator has provision for a tach drive (not included). Order 1751295M91 tach drive if needed. Can be used on TO20 if adding a tachometer. Add $35.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. Replaces 181524M91, 1100043, 1100523, 1100529, 1100530 (Item #: 203518, Ref: 1100523) $365.01

No
Picture
Ignition Coil - Threaded Terminal - 12 Volt - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, Replaces Massey Ferguson OEM number 1015128M91, 1038817M91, 570062M3, 12 Volt coil, Used with Lucas Distributor, Plug wires thread onto terminal, (Item #: 111201) $56.71

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. Fits 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35, 95, 97, F40, 202, 204, MH50. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111740. (Item #: 103151, Ref: ATK1DCR) $9.80

Ignition Tune-Up Kit - For Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, 202, 204, Fits models with Continental engines with Delco distributors with clip held cap, (Item #: 168708) $29.00

Resistor - Ballast resistor used for coil in ignition system. Resistance = .6 ohms. Note: This is NOT used on all ignition systems. (Item #: 105710, Ref: 8NE10306) $3.70

Rotor - Used with Delco distributor and clip held cap. For tractor models (35 up to serial number 245033), (50 up to serial number 536249), (65 up to serial number 702826), TO20, TO30, TO35. (Item #: 110177, Ref: 1750498M1) $3.60

Spark Plug - Spark Plug 18MM Thread Diameter fits Continental Gas Engines in: TO20, TO30, TO35, 50, 65, 85, 88, S90, 135, 150, 165, 175, 180, 1100, 230, 235. Gas Industrials: MF35 Utility and turf, 202, 204, 302, 304. Massey Harris: Pony, 21, 22, 23, 30, 33, 44, 44-6, 44 Special, 101Jr. 333, 444, 555, 303, 402, 404. Replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs. (Item #: 111742, Ref: AL386) $3.10

Spark Plug Wire Set, Custom - No cutting or fitting required for these wires. These are custom made for the following 4-cylinder Continental Gas engines using Delco Distributors: Z120, Z129, Z134, and Z145. Used on tractors: TE20, TO20, TO30, F40, 135, 135 Deluxe, 150, 35, 50, MH50, TO35. Also used on INDUSTRIALS: 202, 204. (Item #: 113765, Ref: S.42779) $17.00

Starter, 12 Volt - This new 12 volt starter with drive is for tractor models TO20, TO30, 35, 50, 65, 202, 204, 302, 356, TO35. Verify number off old starter. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces the Delco number 1107226 and the original equipment numbers: 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX, 4858MFGXL_12V, and 1900348M91. (Item #: 160371, Ref: 1107226) $215.00

Starter, 6 Volt ONLY, Continental GAS Engine - STARTER ASSEMBLY FOR 6 VOLT SYSTEMS ONLY with Continental Gas engine. For TO20, TO30, TO35, F40, MH50, 50, 65, Early 302, 304, 356. Has 9 tooth gear on bendix. Single bolted stud on rear side of starter (about 2 inches from the end) for electrical connection. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 Inches), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Can replace OEM starter numbers 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX. 1 YEAR warranty. Measurement from the outer bolt flange to the end of nose cone is 3.274 inches. (Item #: 111068, Ref: 4858MFGXL) $156.00

Starter Armature - Used on Ferguson TO20, TO30 and TO35 tractors with 1109457 Delco Starters, this armature is 12.22 inches long. Also used on the following Delco starters 1109453, 1109456, 1109457, 1109460, 1109472, 1109476, 1109477, 1109623. Replaces Delco part number 1881818 (Item #: 179588, Ref: 1750466M91) $210.00

Starter - Delco Style (4762), Remanufactured, Delco Remy, 1109457, 181541M91 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, Replaces Massey Ferguson OEM number 181541M91, 1900347M91, Replaces Delco Remy manufacturer number 1109457, Replaces manufacturer number 140-024, 44-9904, 4762, 74762, 91-01-4448, TS-1377, X74762, Delco Style, Voltage: 6, Rotation: Clockwise, Teeth: 9, For a New version of this sku use Item #: 111068, (Item #: 203486) $346.28

Starter Drive - Drive Assembly attaches with keyway and set screws. For tractors: TO20, TO30, TO35, 50, MH50, 35, 65, F40, 202, 203. Services Delco Starters 1107755, 1107654, 1109457. NOTE: Please check the starter that is in your tractor, some starters use a pin to attach drive not a set screw. (Item #: 113968, Ref: 1035335M91) $33.10

Starter Nose Cone - VERIFY BOLT PATTERN - THIS NOSE CONE USES 2 BOLTS TO MOUNT TO THE STARTER BODY. If you have a 4 bolt, we do not have a replacement. Can fit OEM starter part number: 182454M92/1107654. For tractor models TO20, TO30, TO35, F40, MH50, 50, 65, Early 302, 304, 356. Replaces Delco number 1934316. Will NOT fit 4858MFGXL aftermarket starter. (Item #: 111739, Ref: 1751902M91) $45.10

Starter Nose Cone - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, Replaces Delco Remy manufacturer number 1912435, Replaces Delco Remy Starter number 1109457, Replaces manufacturer number 5640-1011, (Item #: 112256) $64.00

Starter, Rebuilt 12 Volt - This remanufactured 12 volt starter has 9 tooth gear on bendix. Single bolted stud on rear side of starter (about 2 inches from the end) for electrical connection. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces 1900347M91, 1900348M91, 4858MFGXL. A refundable $80.00 core charge will be added to your order. (Item #: 203430, Ref: TS-1126) $332.46

Starter Switch - Switch Assembly with key, for ignition and light. Switch has 3 terminals. For GAS tractors: TE20, TEA20, TO20, TO30, TO35, MF35, MF50, MF65, 202, 203, 204, 205. (Item #: 111516, Ref: 180681M93) $14.00

Starter Switch, Manual - For TO20, TO30. Manual Starter Switch. (Item #: 105702, Ref: 181679M1) $9.80

Tune-up Kit, Comprehensive - For Delco distributor with clip-held cap. For 4-cylinder gas engine, kit includes: AL 386 spark plugs, plug wires, points, condenser, rotor, distributor cap. Fits tractors: TO20, TO30, TO35, 35 Ag. before serial number 245033, 35 Utility before serial number 655001052, 35 Turf before serial number 65600452, 85, 88, 90 Super, MH and 50 before serial number 536249, 65 before serial number 702825, 202 Ind. Before serial number 308962, 204 Ind. Before serial number 343688, 302 Ind. Before serial number 119750053, 356 Ind. Before serial number 570001025, Swathers 34, 44. Combines 92, Super 92. (Item #: 158888, Ref: MFTUNEKIT) $58.00

Tune-up Kit, With Plugs - This Tune-up Kit is for Clip held Cap Delco Distributors, 4 cylinder gas models and includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For models TO20, TO30, TO35, (MF35 with serial number prior to 245033), (MH50 with serial number Prior to 536249), (MF50 with serial nunber prior to 536249), (MF65 with serial number prior to 702825), MF85, MF88, MF90 Super, (35 Utility with serial number prior to 655001052), (35 Turf with serial number prior to 656000452), (202 with serial number prior to 308962), (204 with serial number prior to 343688), (302 with serial number prior to 119700082), (304 with serial number prior to 119750053), (356 with serial number prior to 570001025), Super 92. Verify correct spark plug size and type (Item #: 173738, Ref: MFITK10) $27.30

Voltage Regulator, 6 Volt, Positive Ground - For tractor models TO20, TO30, TO35. Voltage Regulator 6 Volt. replaces 180142M92. 4 connectors, 3 on one side, 1 on the other. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Item #: 105516, Ref: GDR6003) $30.00

Wiring Harness, 12 Volt Conversion Kit - Wiring harness for 12 volt conversion kits. For tractor models TO20, TO30. (Item #: 164236, Ref: AKT9205) $15.30

Wiring Harness, Main - Restoration quality Wiring Harness for 6 Volt generator systems only. This set is cotton braided, exactly like original. Includes main wiring harness, and headlight wiring. All terminals soldered and sealed. For model TO30. (Item #: 126801, Ref: 181699M91) $277.00

Engine Bearings

No
Picture
Cam Bearing Set - This cam bearing set is for the Z129 and Z134 engines in TO30, TO35, 35, F40, MH50, 50, 135 SPECIAL, INDUSTRIALS 202 and 204. Standard Set. (Item #: 107235, Ref: SH-683S) $65.00

Main Bearing Kit, Standard - Main Bearing Kit (flanged front main bearing), standard, for Continental Gasoline Engines Z120 and Z129. Tractors: TE20, TO20, TO30. Complete for one engine. (Item #: 184058, Ref: 830511FL) $221.00

No
Picture
Main Bearing Set, .010 - For Z120 and Z129 Gas Engine. Main Bearing Kit size is .010. For TE20, TO20, TO30. THIS IS A SHELL TYPE BEARING - NOT FLANGED TYPE. They are interchangeable. (Item #: 107151, Ref: MS-260P-010) $180.00

No
Picture
Main Bearing Set, .010 - Main Bearing Kit (flanged front main bearing) for Continental Gasoline Engines Z120 and Z129. For models TE20, TO20, TO30. Complete for one engine. (Item #: 184544, Ref: 830511FL-010) $245.00

No
Picture
Main Bearing Set, .020 - For Z120 and Z129 Gas Engine. Main Bearing Kit size is .020. For TE20, TO20, TO30. THIS IS A SHELL TYPE BEARING - NOT FLANGED TYPE. They are interchangeable. (Item #: 107152, Ref: MS-260P-020) $254.00

No
Picture
Main Bearing Set, .030 - For Z120 and Z129 Gas Engine. Main Bearing Kit size is .030. For TE20, TO20, TO30. This is a flanged type bearing. It is interchangeable with shell type. (Item #: 167269, Ref: MS-260P-030) $220.00

Main Bearing Set, Standard - Standard Main Bearing Set For TE20, TO20, TO30 with Continental Z120 and Z129 with Straight Shell Front Bearing. Replaces 1751444M91, 1751604M91, 1751448M91 (Item #: 107150, Ref: MS-260P) $206.00

Piston Pin Bushing Set - Bushing kit, 4-760916M1 pin bushings. For 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35 all with Continental Gas Engines. (Item #: 182637, Ref: 840708M91) $25.80

No
Picture
Rod Bearing, .002 - Connecting Rod Bearing, single .002 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. (Item #: 106983, Ref: 830508M91) $25.00

Rod Bearing, .020 - Connecting Rod Bearing, .020 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. Four required per engine. Sold per journal. (Item #: 106985, Ref: 830510M91) $16.70

No
Picture
Rod Bearing -.040 - SINGLE bearing.040" undersize, for Continental gasoline engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. (Item #: 106987, Ref: 1670SB40) $22.60

No
Picture
Rod Bearing Set, .010 - Connecting Rod Bearing Kit, .010 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. Complete for one engine. (Item #: 185224, Ref: 830509M91) $94.00

Rod Bearing Set, .030 - Connecting Rod Bearing Kit, .030 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. Complete for one engine. (Item #: 183864, Ref: 830510-030) $49.00

No
Picture
Rod Bearing, Standard - Single rod bearing for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. (Item #: 106982, Ref: 830486M91) $13.30

No
Picture
Rod Bushing, SINGLE - Fits Z129 Continental Gas Engine. SINGLE rod bushing. (Item #: 128635, Ref: 760916M1) $6.90

Engine Gaskets

Carburetor Gasket - For Massey Ferguson tractor models F40, TE20, TO20, TO30, TO35, 35, 135, 150, Replaces Massey Ferguson OEM number 181531M2, (Item #: 161242) $1.40

Crank Seal, Front - Lip-Type. Fits Four Cylinder Continental Gas Engines. For 135, 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35, Replaces: 1008597M1, 15287A, 843893M1, 850185M1. (Item #: 167998, Ref: 15287A) $9.60

Crank Seal, Rear - Lip-Type. Fits Four Cylinder Continental Engines. For 135, 202, 204, F40, MF135, MF150, MF165, MF35, MF50, MF65, MH50, TE20, TO20, TO30, TO35. (Item #: 106079, Ref: 1750216M92) $9.00

Crankshaft Seal Kit - Kit contains front and rear crank lip-type seals and gasket for rear and felt seal for front. For Continental Gas Engines: Z120, Z129, Z134, Z145. Tractor Models: TO20, TE20, TO30, TO35, F40, MF50, MF35, MF135, MF150, 202, 204. Replaces: 1500080M1, 15287A, 15288A, 1750112M1, 1750216M1, 1750216M92, 843893M1, 850185M1. (Item #: 173222, Ref: VPC5122) $24.50

No
Picture
Filter Base to Block Gasket - For Massey Ferguson tractor model TO30, Replaces Massey Ferguson OEM number 181725M1, (Item #: 173661) $0.70

Full Gasket Set With Crank Shaft Seals - For TE20, TO20 with Continental Z120 and TO30 with Continental Z129. Comes with crankshaft seals. Does not include cylinder sleeve seals. Cylinder sleeve seals, sold in quantity of 2, available as part number 1750000M1. (Item #: 189103, Ref: FS1865) $61.00

Full Gasket Set Without Crankshaft Seals - Complete Engine gasket set less crankshaft and piston sleeve seals for Continental Gasoline Engines Z120 and Z129. Tractors: TE20, TO20, TO30. ** Cylinder sleeve seals, sold in quantity of 2, available as part number 1750000M1. Replaces 830631M91, 830631M1 (Item #: 107296, Ref: 830631M91) $57.00

Gasket Set - Upper - For Massey Ferguson tractor models TE20, TO20, TO30, Replaces Massey Ferguson OEM number 836426M1, (Item #: 160538) $31.50

Head Gasket - Gasket, cylinder head. For tractor models TE20, TO20, TO30 all with either Continental Z120 or Z129 engines. (Item #: 173182, Ref: 1750336M1) $29.60

Head Gasket Set - For Continental Gasoline Engines Z120 and Z129. Tractors: TE20, TO20, TO30. (Upper gasket set with head gasket). (Item #: 107244, Ref: TO20VG) $33.30

Main Bearing Cap Packing - Rear Main Bearing Cap Packing for Z120, Z129 and Z134 engine. Not included in Overhaul Gasket Set. Replaces 1021673M1 (Item #: 173240, Ref: 1006635M1) $4.70

Oil Pan Gasket - For tractor models TE20, TO20, TO30, TO35, 35, 135, 150, 202, 204, 20C, 2135, 2200, 230, 235, 245, 2500, 30B, 4500, 40, 35, 50. All Continental 4 cylinder engines. Replaces 1750024M1 (Item #: 107278, Ref: 1750024M1) $7.30

Rocker Cover Gasket - For tractor models TE20, TO20, TO30, TO35, 135, 150, 202, 204, 20C, 2135, 2200, 230, 235, 245, 2500, 30B, 4500, F40, 35, 50. All using Continental Z120, Z129 or Z134 gas engines. (Item #: 110187, Ref: 1750002M1) $6.50

Timing Cover Gasket - For Massey Ferguson tractor models TO20, TO30, Replaces Massey Ferguson OEM number 1750274M1, Gas Tractors Only, (Item #: 110186) $3.40

Valve Cover Vent Gasket - This valve cover vent gasket is used on Ferguson, Massey Ferguson and Massey Harris Tractors with Continental Gas Engines. It replaces part numbers 1750006M1, Z129A204. (Item #: 173372, Ref: 1750006M1) $2.60

Engine Rebuild Kits

Basic In-Frame Engine Kit, Z129 Gas - For TO30. Continental Z129 CID Gas Engine, 4 cylinder, 3 3/8 inch overbore. Basic In-Frame Engine Kit includes: sleeve and piston kit with rings, pins and retainers, valve grind set and oil pan gasket. (Item #: 189682, Ref: BIFM119FL) $254.00

No
Picture
In-Frame Overhaul Kit - 3 3/8 inch overbore. For TO30 with Continental Z129. Contains pistons, rings, pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Item #: 184392, Ref: R1995-IFKA) $890.00

No
Picture
Overhaul Kit, Comprehensive, Less Bearings - 4-Cylinder Continental Gas, 129 CID. 3-1/4 inch standard bore, 3-3/8 inch overbore supplied. Complete engine overhaul kit, less bearings. Contains sleeves and sleeve seals, pistons and rings, complete gasket set including crank seals, pin bushings, intake and exhaust valves, valve guides, springs, keys, fan belt, oil pump kit, oil filter element, air cleaner hose, upper and lower radiator hoses, distributor points and condenser, spark plugs, Marvel-Schebler basic carburetor kit. For TO30 Series. (Item #: 184726, Ref: 30K600-LCB) $603.90

Overhaul Kit, Less Bearings - For tractor models TO30. This kit is a overbore to 3-3/8 inch for Z129 Continental gas engine. Kit contains, sleeves, sleeve seals, pistons and rings, pins and retainers, pin bushings, gasket set and crankshaft seals. Engine bearings ordered separately. (Item #: 130843, Ref: BEKM119FL-LCB) $342.00

No
Picture
Overhaul Kit, Z129 Gas, Less Bearings, With Valves - Engine Overhaul Kit. For TO30 (Z129 Continental Gas) Contains sleeve and piston kit (sleeves, pistons, rings, pins and retainers, super power kit, increases bore to 3 3/8 inch). Pin bushings. Complete gasket set. PIN TYPE intake and KEY TYPE exhaust valves (plus guides, locks and springs). Valve stem seals and bearings sold separately. (Item #: 187399, Ref: EOK119FL-LCB) $667.77

Valve Overhaul Kit, Z129 or Z134 Engines - For TO30, TO35, 35, F40, MH50, 50, 135 Special, all with 4 cylinder Z129 or Z134 Continental Engine. Engine Valve Overhaul Kit includes: pin type intake and key type exhaust valves, valve springs, valve keys and valve guides. Replaces: keeper half: 1004512M1, keeper pin: 18291A, valve spring: 21176A, intake valve: 830487M91, 1750070M1, exhaust valve: 830488M91, 1750072M1, valve guide: 830490M91, 1750069M1. (Item #: 107487, Ref: VOKM129) $118.00

Engine Parts

Camshaft - For Z120, Z129, or Z134 Continental Engines on TE20, TO20, TO30, T035, 135, 202, 204, 2135, 2200, 30, 35, 50. Replaces 1500098M1, 1750074M1, 1750293M1, 836543M91. (Item #: 110977, Ref: 836543M1) $142.00

Camshaft Gear - Camshaft gear, 48 teeth, Continental Gas Engine in models: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135, 150; Industrials: 202, 204, 2135. Replaces: 1046676M1, 1750237M1. (Item #: 121582, Ref: 1750237M1) $102.00

Connecting Rod, Used - For Massey Ferguson tractor models TE20, TO20, TO30, TO35, 35, 50, 135, 150, 2135, 2200, Replaces Massey Ferguson OEM nos 830644M91, 1046982M91, Replaces Massey Ferguson Casting nos Z120D500, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430302) $82.01

Crankshaft - New Crankshaft only (bearings not included) for Continental Z129 and Z134 Gas Engines. For TO30, TO35, 35, 50, MH50, 135, 202, 204 . See our engine bearings category for prices and sizes. Also replaces 1750169M1. (Item #: 102110, Ref: 830686M91) $429.00

Crankshaft Gear - Crankshaft gear, 24 teeth: TE20, TO20, TO30. Continental Gas Engine. (Item #: 121583, Ref: 1750284M1) $45.10

No
Picture
Crankshaft, Remanufactured, Z129 - For Massey Ferguson tractor model TO30 (gas), Replaces Casting number Z129, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., For a New version of this sku use Item #: 102110, (Item #: 200459) $435.01

Front Crankshaft Pulley - Ductile Iron. Fits tractor models TE20, TO20, TO30. Replaces: 1750301M1. The pulley measures 2-1/2 inches overall length and 5-3/4 inch outside diameter. It has a 3/4 inch belt groove width and (4) 7/16 inch-14 NC threaded holes. For front loader pumps, the center to center measurement across the threaded holes is 2-3/4 inches center to center. For the drive hub, if needed, use 500934, for the drive shaft (which may have to be cut to length depending on the application) use 197118. It includes the mounting bolt (grade 8) and lock washer and flat washer. The bolt measures 5/8 inch-18 UNF x 1-1/4 inches. (Item #: 126498, Ref: 1750301M1) $130.00

Governor Assembly - Governor Assembly for Continental Engines in tractors: TE20, TO20, TO30, TO35, MF135, MF35, F40, MH50, MF50, MF150, Pony, 202, 204, 2135, 2200, 2500. Also fits: MF135, MF150, with Perkins gas. Replaces 1002849M91, 529737M1, 529737M91, 738440M91 (Item #: 118785, Ref: 529737M1) $103.00

Governor Compensating Spring - Fits the following tractors using Continental Gas Engine: TO20, TE20, TO30, TO35, F40, MF 35, 50, 135. INDUSTRIALS: 2135. (Item #: 178100, Ref: 181535M1) $10.00

Governor Shaft Seal - For tractor models TO20, TO30, TO35, 135, 150, 230, 235, 245, 35, 50. (Item #: 173207, Ref: 1750108M1) $4.70

Hand Crank, Starter - For tractor models TE20, TO20, TO30. (Item #: 178120, Ref: 180890M1) $18.90

No
Picture
Hand Starting Crank with Spinner - Hand Starting Crank WITH Spinner. For TE20, TO20, TO30, TO35, TE20 Ferguson Tractor and MF 35 Without Bumpers. (Item #: 126699, Ref: 351010R31-S) $72.00

Lifter - New Lifter for TO20, TO30, TO35, MF35, MF50, MF135, MF150, MF65, MF165, 175 all with Continental Gas Engines. (Item #: 161159, Ref: 1750111M1) $18.50

Push Rod - This push rod fits the following tractor models: TE20, TO20, TO30, TO35, 35, F40, 50, 35, 150, 202, 204, 230, 235, 245, 30C, 30B, 2135, 2200, 2500, and 4500. All with the following Continental Gas or LP Engines: Z120, Z129, Z134, and Z145. 8.940 inch overall length, 0.250 inch outside diameter. Sold as a single rod and priced each. Replaces 1750058M1, Z120I-206. (Item #: 182470, Ref: MFS2420) $27.70

Ring Gear, Flywheel - This ring gear is for models TE20, TO20, TO30, TO35, 35, 50, 65, 135, 150, 165, 175, 180, all with Continental Gas Engine. Flywheel Ring Gear with 145 teeth measures 14.685 outside diameter and 13.680 inside diameter and 1/2 inch thick. (Item #: 101976, Ref: 1750034M1) $45.50

Rocker Arm Assembly - For Continental Z120, Z129, Z134, Z145 Gas Engines in models TE20, TO20, TO30, 35, F40, 50, 135, 150, 202, 204, 230, 235, 245, 30C, 30B, 2135, 2200, 2500, 4500. With forged ends. Replaces: (1) 1750073M1 rocker arm shaft, (2) 354043X1 cotter pin, (2) 1755067M1 washer, (2) 1750124M1 oil plug, (2) 1750056M1 rocker arm short spring, (4) 1750067M91 right rocker arm assembly, (4) 1750066M91 left rocker arm assembly, (3) 1750057M1 long shaft springs and (4) 1750055M1 support brackets. (Item #: 126173, Ref: MFS129) $270.00

Rocker Shaft Bushing - This is a Set of 8 Rocker Shaft Bushings, semi finished. For tractor models TE20, TO20, TO30, 135 Deluxe, 150 with Continental Z120, Z129, Z134 or Z145 Gas Engines. (Item #: 184542, Ref: S.60327) $52.00

No
Picture
SINGLE Valve Guide - Z134, Z129 or Z120 Gas - SINGLE Valve Guide for 135, 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35 all with Z134, Z129 or Z120 Gas Engines. MUST ORDER 8 for complete engine. (Item #: 108035, Ref: 830490M91) $2.20

Valve, Exhaust - Exhaust valve, key-type. For Continental Gas Z129 and Z134 engines in models 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO30, TO35. Price shown is for each. (Item #: 159420, Ref: 1750072M1) $11.00

Valve, Intake - Intake valve, pin-type for 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO30, TO35. Price is for EACH. MINIMUM ORDER IS 4. (Item #: 128687, Ref: 1750070M1) $8.20

Valve, Intake Stem Cap, Aftermarket, Pack of 4 - These intake valve stem caps come in a package of 4 and are used for the following tractor models with the Z120, Z129, or Z134 engines: TO20, TO30, 202, 204, F40, 135, 35, 50, MH50, TO30, and TO35. They measure 0.500 inches outside diameter, 0.218 inches tall, and 0.316 inches inside diameter. They are replacing: 1750060M1, 830704M91, and Z120I-208 (Item #: 178138, Ref: 830704M91) $38.00

Valve Keys - Sold each. 2 used per valve. These are only used on Roto Type Exhaust Valves on Z120, Z129, Z134, and Z145 Continental Engines. This set will be enough for two engines in this application. Replaces original part numbers 1004512M1, 841370M91. (Item #: 108430, Ref: 46209D) $0.70

Valve Lock, Pin Type - Intake and exhaust valve lock, 1 used per valve. For tractor models TE20, TO20, TO30, F40, MF135, MF35, MF50, TO35, 202, 204 all with Z134, Z129 or Z120 Gas Engines with pin type valves. (Item #: 108429, Ref: 18291A) $2.10

Valve Oil Seal - For Intake Valves on the Z120, Z129 and Z134 engines. For models TE20, TO20, TO30 and TO35. (Item #: 168510, Ref: 1750062M1) $0.70

Valve Spring - Valve spring for intake and exhaust. For Continental Gas Engines in models: 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35. Replaces 15P461, Y400I215, Y400I00215, 21176A, 21176AV, Y400I00215 (Item #: 108428, Ref: 840754M91) $3.20

Valve Stem Cap, Exhaust - Aftermarket - These exhaust valve stem caps come in a package of 4 and are used for the following tractor models with the Z120, Z129, or Z134 engines: TO20, TO30, 202, 204, F40, 135, 35, 50, MH50, TO30, and TO35. They measure 0.500 inches outside diameter, 0.235 inches tall and 0.126 inches stem diameter. They are replacing: 1750071M1, 830705M91, and Z129I-206. (Item #: 182516, Ref: 830705M91) $38.30

Engine Pistons and Sleeves

Piston and Sleeve Kit, Continental Engine - Complete Kit for 4 cylinders. For TO30, TO35, 35, F40, MH50, 50, 135, (Z129, Z134 Continental Gas). Contains sleeves, sleeve seals, pistons and rings, pins and retainers. 3-3/8 inch overbore. (Item #: 184280, Ref: PK105) $403.00

Piston Sleeve - Single sleeve for 3-3/8 inch overbore piston used on Continental Z129, Z134 Gas Engines. For tractor models TO30, TO35, F40. (Item #: 185625, Ref: S.60844) $45.07

No
Picture
Sleeve and Piston Kit - Sleeve and Piston Kit for 1 cylinder. For Continental engine with a 3 3/8 inch bore. Includes: piston, liner and rings. For tractor models 135, 202, 204, 35, 50, F40, TO30, TO35. All with Continental Z129, Z134 Gas Engine. (Item #: 108105, Ref: SK105) $101.00

Sleeve Seals, Pack of 2 - Pack of 2. O-ring for Piston Liner Sleeve. (NOTE: Sleeves usually use a minimum of 2 O-rings each). Use on Ferguson, Massey Harris and Massey Ferguson tractors with Z120, Z129, Z134, Z145, and G176 engines. Replaces 1750000M1 (Item #: 128575, Ref: 1750000M1) $9.20

Engine Rings

Piston Ring Set - Ring set for 4 pistons. For 3-3/8 inch overbore pistons. (3 compression 3/32, 1 oil 3/16). For tractor models 202, 204, F40, MF135, MF35, MF50, MH50, TO30, TO35. (Item #: 183921, Ref: PRS105) $119.00

No
Picture
Piston Ring Set 3 1/4 Bore - For 4 ring piston, 3 1/4 inch bore, 2 compression at 3/32 and 2 oil at 5/32. Complete Set for 4 cylinder Gas Engine. (Item #: 129089, Ref: 2C7582) $175.00

No
Picture
Piston Ring Set, Std. - For model TO30 with Z129. Original 3 1/4 inch bore, 3 compressing rings 1/8 inch and one oil ring 3/16 inch. 1 used per engine. (Item #: 130062, Ref: 836096M91) $110.00

Exhaust System

Exhaust Elbow - This Exhaust Elbow fits the following tractors using Continental Z120, Z129, or Z134 GAS Engines: TE20, TO20, TO30, TO35. Outlet Outside Diameter 1-7/8 inch. Replaces original part numbers 181866M2, 181886M2. (Item #: 155913, Ref: 181886M2) $34.60

No
Picture
Exhaust Pipe - For Massey Ferguson tractor models TO20, TO30 (gas), Replaces manufacturer number MF-20, Exhaust pipe, Inlet I.D.: Flared, Inlet Length: 13", Outlet O.D.: 1-1/2", Outlet Length: 29", Color: Silver, Use with 102440, 102443, Muffler use Item #: 101515, (Item #: 102442) $43.60

Exhaust Pipe - Horizontal - For gas engine on TO20 and TO30. Has flared inlet, 18 inch vertical length, 23 inch horizontal length, 1 1/2 inch outlet outside diameter. For HORIZONTAL exhaust. (Item #: 120209, Ref: 181460M1) $42.00

Intake and Exhaust Manifold - Made just like the original from ductile iron, this manifold has the original flanged outlet. No adapter required. Used on TO20, TE20 when using TO20 exhaust pipe, and some TO30 when using flanged exhaust outlet. Does not include gaskets. Order R0059G gasket set if needed. Uses FP185 clamp, not included. Replaces 1077789M1, 1750343M91, Z120E500, Z129E501. (Item #: 123132, Ref: Z120E500) $190.00

Intake and Exhaust Manifold - For Massey Ferguson tractor models TE20, TO20, TO30, TO35, 35, 135, 150, 205, 2135 (gas), Compatible with Massey Ferguson Construction and industrial models 202, 203, 204, Replaces Massey Ferguson OEM number 1040903M91, Includes muffler adapter plate, For gasket set use 101618, (Item #: 101617) $178.00

Manifold Gasket Set - For TE20, TO20, TO30, TO35, 35, 135 all with Continental Gas Engine. (Item #: 101618, Ref: R0059G) $9.70

Muffler - Horizontal Muffler (round). For MF135, MF35, TO20, TO30, TO35. Inlet inside diameter 1.5 inches. Outlet outside diameter 1.5 inches. Length 34 inches. Shell diameter 3.25 inches, inlet length 2.75 inches, outlet length 11 inches. (Item #: 102443, Ref: 505545M92) $36.20

Muffler - Vertical 2 piece assembly. Manifold end is flared. Inlet and outlet of the muffler is 1 1/2 inches. For tractor: TE20, TO20, TO30 2-piece. Replaces 184207M91 (muffler). (Item #: 102439, Ref: M112) $95.00

Muffler - 2 1/2 inch inlet length, 1 1/2 inch inlet inside diameter, 23 inch shell length, 8 1/2 inch outlet length, 1 1/2 inch outlet outside diameter, 34 inch overall length. NOTE: Horizontal/Round Body has 3 1/4 inch shell diameter. For tractor models 135, 35, TE20, TO20, T030, TO35. All with gas or diesel engine. (Item #: 102440, Ref: 180364M91) $39.00

No
Picture
Muffler - For Massey Ferguson tractor models TO20, TO30 (gas), Replaces Massey Ferguson OEM number 184207M9, Muffler mount: Vertical, Overall Length: 47", Shell Diameter: 3-1/4", Shell Length: 10-1/4", Inlet I.D.: Flared, Outlet O.D.: 1-1/2", Color: Silver, 1 pc assembly, Inlet Clamp use Item #: 108631, Additional Handling and Oversize Fees Apply To This Item, (Item #: 102441) $64.00

Muffler Adaptor - Connects the muffler pipe to the manifold for horizontal exhausts on tractor models TO20 and TO30. Comes with screws. Note that this part comes with the manifold and does not come with screws. Screws are not available separately. (Item #: 110579, Ref: MFS002) $17.50

Muffler and Pipe - Vertical exhaust one piece muffler and pipe. Flared inlet. 1 piece. Outlet outside diameter 1 1/2 inches. For TE20, TO20, TO30 all with Continental Gas Engines. Support bracket included, not attached. Use FP185 clamp, use R1798 rain cap. (Item #: 102441, Ref: R1693) $64.00

Muffler and Pipe Assembly - This muffler and pipe is FLARED for horizontal muffler and pipe assembly. For tractors: TO20, TO30 replaces 505545M92 muffler and 180460M1 pipe. (Item #: 102438, Ref: M500) $41.20

Muffler Clamp - Flanged clamp. For tractor models TO20, TO30, TE20. Note that there is a large bevel and a small bevel on the inside edge of this clamp. The large side goes toward the manifold. If you install the clamp and the pipe is loose, you have it backwards. If you over-tighten, it will break. Replaces 181461M91. (Item #: 101515, Ref: FP185) $5.00

Muffler, Vertical, Black Enamel - Comes with pipe, 2 clamps, bolts and rain cap, 1-7/8 inch inlet. For tractor models TO35 with Continental Engine. (TO20, TE20, TO30 if manifold S.60036, 181866M2 and gasket 3640488M1 are used). Also adaptable to other Massey Ferguson tractors with Continental engines and 1-7/8 inch pipe. Replaces 181867M91. (Item #: 184783, Ref: S.43643) $75.00

Muffler, Vertical, Silver Finish - Comes with pipe, 2 clamps, bolts and rain cap, 1-7/8 inch inlet. For tractor models TO35 with Continental Engine. (TO20, TE20, TO30 if manifold S.60036, 181866M2 and gasket 3640488M1 are used). Also adaptable to other Massey Ferguson tractors with Continental engines and 1-7/8 inch pipe. Replaces 181867M91. (Item #: 187422) $69.00

Vertical Muffler Pipe to Manifold Gasket - Exhaust Elbow Gasket. For tractor models TE20, TO20, TO30, TO35, 135, 150, 35, 50, 65, 230, 235, 245, 20, 202, 203, 204, 205, 20C, 2135, 30B, 30D. Also Replaces OEM number 827877M1, 180104M1, 4222475M1, 72080353. Priced each. (Item #: 101628, Ref: 3640488M1) $3.00

Fuel System / Air Intake

Air Cleaner Hose - For tractor models TO30, TO35, (TEA20 with 85mm engine serial number 200001 and up), 35 Gas. Measures 1 9/16 inches inside diameter small end, 3 inches inside diameter large end, overall length of 6 1/2 inches. (Item #: 167809, Ref: 180362M1) $18.80

Air Cleaner Oil Cup - This cup is for Clamp Type Air Cleaners. This cup measures 4 3/4 inches outside diameter at the lip. The height is 3 inches. Please measure before ordering to ensure the proper fit. For models TO20, TO30, TO35, 202, 204, 35. Replaces part numbers 15791A, 15793A, 1751275M1, 180201M1. (Item #: 111005, Ref: 311507) $10.98

Air Hose to Carburetor - For TE20, TO20, TO30, 35, 50, 135, MH50 gas tractors. Rubber Air Hose is 2 3/8 inches long, 1 1/2 inch inside diameter. (Item #: 149842, Ref: 9N9652) $3.10

Carburetor - New Zenith Carburetor with reversible linkage. These carburetors outperform the original carbs used on: TO20, TO30, 16, 81, 82, 3D combines, 60 PT combines, and industrials using Continental 140, F162 gas engines. Also fits Massey Harris: 30, MH33, 81, 82 101JR, 102JR, 201, 203, 333 (F162 engines). Replaces Marvel-Schebler TSX34, TSX62, TSX88, TSX55, TSX94, TSX155, TSX188, TSX308, TSX312, TSX447, TSX458, TSX505, TSX506, TSX541, TSX308, TSX361A, TSX447, TSX596, TSX606, TSXU828, TSXU829, TSXU831, TSXU832. Massey Ferguson Part numbers 181643M1, 181644M91, 517903M1, 517903M91, 539715M91, 761301M91. Center to center on the 2 mounting studs is 2 5/16 inches. This carburetor comes with studs that attach to carburetor. THIS WILL NOT WORK IN THOSE APPLICATIONS THAT STUDS MUST BE USED IN THE MANIFOLD. 2 5/16 InchES CENTER TO CENTER ON MOUNTING BOLTS. Made in USA, 1 year warranty. (Item #: 100747, Ref: 12522) $492.00

Carburetor - With Mounting Gasket. Fits TE20, TO20, TO30. New Carburetor has a different polished finish than the original Marvel-Schebler. Parts are interchangeable with original. Replaces Marvel-Schebler carburetor numbers TSX458, TSX361A, TSX248, TSX272, TSX312 and TSX361. Mounting bolt spacing 2 3/8 inches center to center. Replaces 181644M91, 181643M91. (Item #: 113773, Ref: 181643M91) $214.28

Carburetor - For TO35 (Deluxe and Standard), 35, 40, MH50, 135, 150, 202, 204, 50, 2135. Replaces Marvel-Schebler TSX605, TSX683, TSX882. 2 3-8 inches center to center on mounting bolts. Cast Iron, like the original. (Item #: 185746, Ref: 533969M91) $213.00

Carburetor - Aftermarket replacement for 12522 outperforms the original Marvel carburetors: TSX34, TSX62, TSX88, TSX55, TSX94, TSX155, TSX188, TSX308, TSX312, TSX447, TSX458, TSX505, TSX506, TSX541, TSX303, TSX361A, TSX447, TSX596, TSX606, TSXU828, TSXU829, TSXU831, TSXU832. Zenith 13809, 13800. Massey Ferguson Part numbers: 181643M1, 181644M91, 517903M1, 517903M91, 539715M91, 761301M91, 539715V9. Linkage is reversible. This carburetor comes with studs which attach to the carburetor and will not work with those applications that the studs need to attach to the manifold. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models TO20, TO30, 16, MH82, MH30, MH33, MH81, MH82, MH101JR, MH102JR, MH201, MH203, MH333. (Item #: 185128, Ref: 12522B) $293.00

Carburetor Elbow and Strainer - Elbow and strainer fits models 135, 150, 35, 50, F40, TE20, TO20, TO30, TO35, 202, 204, and 2135 models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. Replaces OEM numbers 1751172M91 and 1751212M91. (Item #: 110005, Ref: 9N9553) $4.60

Carburetor Float - Float for Marvel-Schebler Small Bowl Carburetors in tractors: TO20, TO30, TO35, MF35, F40, MH50, MF135, MF150. For F40, MF135, MF150, MF35, TO20, TO30, TO35. Replaces 15480A. (Item #: 108449, Ref: 9N9550A) $9.60

Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4 5/16 inch. TO20, TE20, TO30, TO35, F35, F50, F135, F150, F202, F204, F40, MF35, MF50, MF135, MF150, MF202, MF204, MH101JR, MH22, MH30, MH50, MH81, Colt, Mustang, Pacer, MH20, MH22K, MH82, MH102JR .TSX155, TSX188, TSX248, TSX272, TSX28, TSX308, TSX309, TSX312, TSX34, TSX361, TSX361A, TSX447, TSX458, TSX541, TSX55, TSX605, TSX606, TSX643, TSX683, TSX88, TSX882, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, TSXU834 (Item #: 182465, Ref: 9N9502) $4.20

Carburetor Kit, Basic - Kit for Marvel TSX882, TSX34, TSX308, TSX309, TSX683, TSX361, TSX248, TSX272, TSX312, TSX605, TSX458 carbs used on 135, 150, 20, 30, 35, 50, TE20, TO20, TO30. (Item #: 100733, Ref: MS101) $16.00

Carburetor Kit, Basic - Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models TO20, TO30, MH81, MH82, 3D combines, 60PT combines, MH30, MH33, MH81, MH82, MH101JR, MH102JR, MH201, MH203, MH333. (Item #: 186565, Ref: K2119) $47.90

Carburetor Kit, Basic - This Basic Kit is used on TSX28, TSX55, TSX88, TSX155, TSX188, TSX248, TSX272, TSX312, TSX361A, TSX458, TSX605, TSX683, TSX882 - Includes: gaskets, needle, seat and throttle shaft. (Item #: 112353, Ref: BK48V) $26.60

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877, 14007, 13794, 13794B (Item #: 183586, Ref: BK44V) $28.30

Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for Marvel-Schebler number TSX458. For Ferguson TO20, TO30 tractors. The kit contains all the parts shown. (Item #: 182527, Ref: R7916) $61.00

Carburetor Kit, Comprehensive - For tractor models TO20, TO30 all with Marvel Schebler Carburetor number - TSX458. Comprehensive Carburetor Kit contains the following parts for a Major Overhaul. Includes: gaskets, needles, seats, throttle shaft, springs, and mixture screw. The main nozzle that is in this kit will NOT fit the TSX458. Does not include float. (Item #: 108467, Ref: C549V) $43.20

No
Picture
Carburetor Main Adjusting Needle - Main Adjusting Needle is for Marvel Carburetor TSX458 on models TO20 and TO30. (Item #: 182853, Ref: 9N9565C) $6.80

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX458. For the following tractor models: TO20, TO30. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203333, Ref: 1604-CARB) $225.01

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: UT2223S, UT2418S, UT2612S. Replaces Carter number UT cast top and aluminum bottom. For the following tractor models: TO35, 35, 40, 50. Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203778, Ref: 1605-CARB) $235.01

No
Picture
Carburetor, Rebuilt - This rebuilt Zenith carburetor is a replacement for 12522. For models TO20, TO30, MF16, MF81, MF82, MF140, F162, MH30, MH33, MH81, MH82, MH101JR, MH102JR, MH201, MH203, MH333, all using a Marvel number TSX34, TSX62, TSX88, TSX55, TSX94, TSX155, TSX188, TSX308, TSX312, TSX447, TSX458, TSX505, TSX506, TSX541, TSX308, TSX361, TSX44, TSX596, TSX606, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. A $50.00 core charge will be added to the price and is refundable when you send your core to us and it is verified to be a rebuildable core. You will receive instructions for returning your core for a refund if you have one available. This carburetor WILL NOT WORK IF YOUR carburetor has studs that screw into the manifold. This carburetor uses studs that attach to the carburetor and then pass through the manifold and then fasted with nuts. (Item #: 203219, Ref: 12522R) $225.01

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: UT2223S, UT2418S, UT2612S. Replaces Carter number UT all aluminum. For the following tractor models: TO35, 35, 40, 50. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 204515) $235.01

Choke Knob - For Massey Ferguson tractor models TO20, TO30, TO35, 35, 40, 50, 65, 85, 88 Replaces Massey Ferguson OEM number 193346M1, 180708M1, , Compatible with Massey Harris tractor models 50, Replaces OEM number TO9703, (Item #: 126115) $12.30

Fuel Cap - For tractor models TO20, TE20, TO30, TO35, 1100, 1150, 135, 150, 165, 175, 203, 205. Replaces OEM 520948M91. This is a non-vented cap. (Item #: 185782, Ref: D5NN9030A) $9.10

Fuel Cap, Vented - Fuel Cap INTERNAL LOCK TANGS 2.7 inch OD, 1.78 inch overall tab length, 0.250 inch tab width. This silver cap is for models: Pony, Pacer, TE20, TO20, TO30, 35, F40, 50, 65, 85, 88, 90, 135, 150, 165, 175, 1080, 1100, 1130, 1150, 1500, 1800, 202, 203, 204, 205, 302, 304, 356, 2135, 3165. Replaces 850493M1, YTO 520948M91. Verify OEM number to ensure fit. (Item #: 184806) $8.90

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 180060M1. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. For the following models:TE20, TO20, TO30, TO35, F40, 35, 50, 65, 85, 88, Super 90 (all gas). Replaces 1001514M1. (Item #: 105382, Ref: 9N9162) $3.20

Fuel Shut Off - Fuel Shut Off Valve. For tractor models 165, 20D Indust/Const, 20E Indust/Const, 231, 240P, 255, 261, 2640, 30E Indust/Const, 35, 3505 Combine, 3525 Combine, 3545, 50 Loader, 65, 765, TE20, TEA20, TO20, TO30. 3/8 BSPT male thread to tank, 1/2 UNF female outlet. (Item #: 151838, Ref: 1851653M91) $10.50

Fuel Tank - Like original, drilled for toolbox. For tractor models TE20, TO20, TO30. Replaces 181637M91. (Item #: 104098, Ref: S.43668) $195.00

Fuel Tank - This Fuel Tanks is a direct replacement for tractors with 80, 87mm Standard Gas Engines. Does not come with cap. Cap can be ordered separately as Part Number C5NN9030D. Will work for Continental Z120, Z129. Sediment bowl will be 1 inch forward of original with no holes pre-drilled for tool box. For tractor models: TEA20, TE20, TO20, TO30. Tank measures 23 inches in length. (Item #: 104098, Ref: 181637M91) $195.00

Fuel Tank Cap - For Massey Ferguson tractor models Super 90, TE20, TEA20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, 135, 150, 165, 175, 178, 180, 1080, 1100, 1130, 1150, Compatible with Massey Ferguson Combine (s) 300, 410, 510, 540, 550, 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 30, 50A, 203, 205, 302, 304, 2135, 3165, Replaces Massey Ferguson OEM number 520948M91, 180144M91, 188716M93, (Item #: 154999) $7.60

Sediment Bowl Assembly - Strainer assembly, for GAS tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65, MF85, MF88 industrials: 35, 202 to serial number 309328, 204 to serial number 343891, 302 to serial number 119700213, 304 to serial number 119750210, 356 to serial number 670001084. The fuel bowl assembly has a 3/8 inch NPT male inlet and 1/4 inch pipe thread (7/16 -24) female outlet, 1-1/4 inch long bowl. Replaces OEM numbers 0236986, 180141V91, 193995M91, 193995M92, 193995V92, 180141M91, 632948M92. (Item #: 105381, Ref: 2NAA9155B) $14.50

Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet. Includes a 5/16" line compression adapter fitting. For tractor models TE20, TO20, TO30, TO35. All with Continental Z120, Z129, or Z134 Gas Engines. Sediment Bowl Assembly. To fuel line is 1/8 inch pipe connection, 3/8 inch pipe connection to tank. (Item #: 105370, Ref: 61782C91) $16.00

Gauges

Ammeter Assembly - Fits all TO and MF models using 30-0-30 amperes. Non-luminous, chrome bezel for 2 inch hole. Replaces 515521M91. (Item #: 121632, Ref: A0NN10670A) $7.10

Ammeter Black Ring - Fits all TO and MF models using 30-0-30 amperes. Black bezel for 2 inch hole. Replaces 515521M91. (Item #: 110410, Ref: A0NN10670A-BLAC) $8.60

Oil Pressure Gauge - 80 pound oil gauge. Fits TE20, TEA20, TO35, MF35, MF50, MF65, Massey Harris 44, 55 Series. For 2 inch hole. Replaces OEM number 506902M92. (Item #: 110411, Ref: FAD9273A) $14.70

Oil Pressure Gauge, White Face - Chrome bezel. 3/8 inch-24 UNF female thread. For tractor models TE20, TO20, TO30, TO35, F40. All with Z120, Z129, Z134. (Item #: 104105, Ref: 180100M92) $15.80

Oil Pressure Gauge with Male Fitting - (1/8 inch NPT) For tractor models TE20, TEA20, TO20, TO30. (Item #: 104106, Ref: S.61466) $9.70

Proofmeter Drive Assembly - For a DELCO Alternators and Generators. This improved design uses a steel drive gear (originals used a fiber gear). Proofmeter Drive Assembly mounts on original type generator. Fits TO20, TO30, TO35, 35, 50, 65, 85, 88, Super 90, 135, 150, 175, 180, 1080, 1100, Industrials: 30, 31, 35 Turf and Utility, 50, 2135, 2200, 2500, 3165, 202, 204. ALL GAS ENGINES. Includes housing, 2 drive gears and gaskets. 7/8 - 18 threads. Does NOT include cable. (Item #: 113771, Ref: 1751295M91) $26.51

Tachometer With Mounting Brackets - This Tachometer With Mounting Brackets is used to add a tachometer to your Ferguson TO20 or TO30 tractor. Your tractor must have a generator or alternator with a tach drive to use this kit. (Generator 1100523 with 1751295M91 tach drive, or Alternator ADR0382 would work). Replaces 1751311M1, 1751312M1, 1751314M91 (Item #: 113772, Ref: 1751311M1) $176.25

Water Temperature Gauge - This temperature gauge has a 72 inch Capillary tube, 2 inch Face Diameter, Chrome Ring. 180 degree normal temperature setting, 220 degree pegs top end. 5/8 inch UNF connector. TO20, TO30, TO35, FE35, F40, MH44, 50, 333, 444, 555, MF35, 50, 65, 85, 88, Super 90, 135, 165, 175, 178; ind. 20, 30, 31, 40, 50A, 70, 80, 202 Work Bull, 2200, 3165. Replaces: 1078125M91, 1079390M91, 180727M91, 180727M93, 182652M92, 1850512M94, 881396M91, 899455M91, 108727M93, 1078125M91, 0236708, 1078125M91, 180727M91, 180727M92, 180727M93, 881369M91, 899455M91 (Item #: 104116, Ref: 180727M91) $24.30

Hitch / Drawbar

Clevis - Clevis Assembly with pins, for SDA6. The bolt hole spacing is 3 3/8 inches center-to-center. For MF50, TO20, TO30, TO35. (Item #: 178030, Ref: SDA2) $40.00

Clevis Pin - The Clevis Pin is used to hold the drawbar in part number SDA2. Measure 7/8 inches diameter and 3 3/8 inches long without head. Replaces 07040200, NCA803B. (Item #: 168051, Ref: PT3) $5.00

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.00

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. For tractor models TE20, TEA20, TO20, TO30. (Item #: 115051, Ref: NCA596B) $38.10

Drawbar Kit, Swinging - This Swinging Drawbar Assembly contains drawbar: 29.35 inches long, 2.00 inches wide, 1.00 inch thick. Rear drawbar hanger, drawbar clevis assembly and drawbar clevis pin. For tractor models TE20, (TEA20 late only), TEF20, TO20, TO30, TO35, FE35, 50. May come painted red, black or primer. (Item #: 111411, Ref: 49A34R) $130.00

Drawbar, Swinging - Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. Holes on the hitch side are 5/8 inches diameter and located 1-1/2 and 4-3/8 inches on center from end. Holes on the tractor side are 0.950 inches and are locates 1-5/8, 3-5/8 and 7-5/8 inches on center from the end. For tractor models 50, 35, 851, 860, TO20, TO30, TO35. (Item #: 109566, Ref: C0NN805F) $38.20

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Several Ferguson, Massey Harris and Massey Ferguson Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces 180856M9 (Item #: 111911, Ref: EC0N660A) $5.20

Hitch Eyelet Bushing - Verify measurements: 7/16 inch x 5/8 inch x 1 1/2 inch. For tractor models TEA20, TE20, TO20, TO30, TO35, 35, 50. (Item #: 173359, Ref: 180859M1) $1.90

Leveling Box Assembly - This Right Hand Leveling Box Assembly uses 5/8 inch pins and opens center-to-center from 17.75 inches to 21.5 inches. Width of the fork is 9/16. Fits TO20, TO30, FE35, 35, 50 (up to serial number 518703), MH50. Replaces 182642M91, 182642M94. Center to center OPENS TO MAXIMUM 21.5 inches. (Item #: 113624, Ref: 8N577A) $56.00

Leveling Box Fork - A=5/8 inch, B= 3/4 inch, C= 11/16 inch, D=14-3/16 inch. For tractors: TE20, TO20, TO30, TO35, FE35, F40, MF35, MF135, MF150, MF65 (used in standard right hand assembly with 10-1/2 inch shaft), also left hand on MF65. (Item #: 110971, Ref: 184358M1) $32.12

Leveling Box Fork - A= 5/8 inch, B= 3/4 inch, C=1/2 inch, D=9-3/4 inch. For tractors: TE20, TEA20, TEF20, TO20, TO30, (TO35 when used with 14 inch shaft). (Item #: 108897, Ref: 890674M1) $28.60

Leveling Box Shaft - Shaft and pinion, leveling box, 10-1/2 inches long. For tractors: TE20, TO20, TO30, MF35, MF135 (used in standard right hand assembly with 14-1/2 inch yoke). For MF165, MF65. (Item #: 173693, Ref: 185220M1) $20.20

Leveling Rod, LH - Hole-to-hole length is approximately 20 inches. Fits TE20, TEA20, TEF20, TO20, TO30, FE35, TO35, F40. (Item #: 111007, Ref: 182544M92) $44.30

Lift Arm, Lower, Right or Left - Lift Arm for category 1. 32 inches in length to hole centers, and 7/8 inch holes in end sockets (swivel type). One half inch width. Replaces 180847M91, 180847M1 and 30543E91. For tractors: TE20, TO20, TO30, TO35, TEA20 right or left.180846M91 (Item #: 103208, Ref: 9N555B) $48.00

Low Link Pivot - Pivot Shaft for lower link. Threaded ends 5/8 inch NF and 5/8 inch NF, overall length 5-1/4 inches. For tractors: TO20, TO30, TO35, MF35, MF135, MF150 industrials: 2135, 3165, 202, 204. MF1130. Replaces 181229M2, 181229M1, 181229M4, 181229M5 (Item #: 166280, Ref: 181229M5) $12.90

Stabilizer Arm - Stabilizer Arm for 3-point hitch measures 31-1/2 inch center to center hole spacing. For tractor models F40, TO20, TO30, TO35. Replaces 181778M1. (Item #: 110516, Ref: 230042R) $15.30

Stabilizer Arm, Red, HD - Stabilizer arm for 3-point hitch, high alloy steel, 31-1/2 inch hole spacing. For tractor models F40, 50, TO20, TO30, TO35. 181778M1-XHD. (Item #: 110516, Ref: 230042XHD) $15.30

Stabilizer Bar, Adjustable - 28-1/2 inches to 35 inches, 7/8 inch hole in both ends. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40. (Item #: 184053, Ref: S.00184) $49.30

Stabilizer Bracket - Used on the left or right side, this bracket has mounting bolt hole spacing of 5 inches on center. It is 6.75 inches long and 0.375 inches thick. This part replaces 231254, C5NNN928D, 181775M1, 181775M91, 181776M91. Color varies. This part may arrive Red, Blue, or Black. (Item #: 111709, Ref: 231254) $13.50

Stabilizer Bracket-LH - For tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35, F40, 135, 20 Industrial, 30 Industrial, 35, 50 Industrial. Replaces 181776M91, 818662M94 (Item #: 155771, Ref: 181776M91) $34.50

Stabilizer Bracket-RH - For tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35, F40, 135, 20 Industrial, 30 Industrial, 35, 50 Industrial. Replaces 181775M91, 646102M1, 818661M93, 818661M94 (Item #: 155772, Ref: 181775M91) $22.80

No
Picture
Stabilizer Pin - For Massey Ferguson tractor models TO20, TO30, 35, 135, Replaces Massey Ferguson OEM number 824332M1, Replaces manufacturer number VPL7029, Length: 2.875", Pin Diameter: .750", Thread Length: 1-3/8", (Item #: 176705) $4.10

Stabilizer Pin with nut and lockwasher - Category I. Length 2.625 inches, pin diameter .875 inches, thread .625 inches-18. Replaces Original Part Numbers 181777M1, 646101M1, 646101M2. (Item #: 111677, Ref: SBP75-WNL) $0.98

Stabilzer Arm - For Massey Ferguson tractor models F40, TE20, TEA20, TO20, TO30, TO35, 50, Replaces Massey Ferguson OEM number 181778M1, 33.250" Long, 0.375" Thick, 1.75" Wide, 0.937" Hole, 31.562" Center to Center, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108781) $19.50

Stay Arm Red - Stay Arm, lower, 1/4 inch thick steel. For tractor models TE20, TO20, TO30. (Item #: 111112, Ref: DBSL) $6.98

Stay Arm Red - Stay Arm upper, 1/4 inch thick steel. For tractor models TE20, TO20, TO30.DBSU (Item #: 111113, Ref: 9N5374) $7.70

Swinging Drawbar Hangar - For tractor models 50, TO20, TO30, TO35. Rear Drawbar Hanger. Used in Drawbar Kit number 49A34R. 9.75 inches tall. (Item #: 173155, Ref: 49B71R) $36.30

Swinging Drawbar Hanger - Drawbar Hanger for swinging drawbar. For MF50, TO20, TO30, TO35. SDA3. 9.75 inches tall. (Item #: 173155, Ref: NCA809A) $36.30

Top Link Rocker Bracket - This Top Link Rocker Bracket is used on Ferguson TO20, TE20 TEA20 and TO30 tractors. It replaces original part number 185273M91 (Item #: 178853, Ref: 185273M91) $75.65

Hydraulic System

Bushing - Bushing, Hydraulic Pump Base, for PTO Shaft. For tractors: TE20, TO20, TO30. Replaces OEM number 181095M1. (Item #: 172372, Ref: 9N649A) $27.20

No
Picture
Bushing, Hydraulic Lift Shaft - Size is: 2-3/8 inch outside diameter, 2 inch inside diameter, 3 inches long. For tractors: TE20, TO20, TO30. For MF135, MF150, MF35, MF50, TO35. (Item #: 173523, Ref: 180896M91) $14.20

Chamber Kit - Repair kit for one Hydraulic Pump Chamber. Fits either left or right. CHAMBER KIT For TE20, TO20, TO30. (Item #: 113990, Ref: 9N621KIT) $25.60

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Item #: 111829, Ref: 193400M1) $10.90

Draft Control Plunger - For TE20, TEA20, TO20, TO30. Replaces OEM part number 890700M1. Fine Tread Style (Item #: 111890, Ref: 8N541B) $40.00

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35, TO30, TO20, TE20. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Item #: 165989, Ref: 9N547B) $35.00

Draft Control Spring Plate - This Draft Control Spring Plate is used on Ferguson TE20, TEA20, TO20, and TO30 tractors. It replaces original part numbers 180894M1 and TO527. If you need the plate with the pin, order 8N527. (Item #: 178070, Ref: 9N527) $16.10

Draft Control Spring Plate, With Pin - This plate has the pin. For models TE20, TEA20, TO20, TO30. Replaces 180894m1, TO527. If you need the plate without the pin, order number 9N527. (Item #: 178077, Ref: 8N527) $18.20

Front Hydraulic Pump Drive Hub - A front hydraulic pump drive hub that fits models TE20, TO20, TO30 (when using our 1750301M1 crankshaft pulley); Replaces: 500934, 290421. The spline diameter is 1 inch and 10 Splines. Center to center on mounting bolts is 2-3/4 inches across with a 4 inch outside diameter, bolt holes are 7/16 inch. (Item #: 179744, Ref: 500934) $60.00

Gasket - Hydraulic Lift Cover - For Massey Ferguson tractor models TO20, TO30, Replaces Massey Ferguson OEM number 180881M1, (Item #: 152391) $4.00

Gasket, Hydraulic Pump Drain - Hydraulic Drain Plug Gasket 2 inches inside diameter and 2 5/8 inches outside. It is used on TE20, TEA20, TO20, TO30 (Hydraulic Pump Drain Plug Gasket) ]; Replaces: 181468M1, TO7011 (Item #: 112227, Ref: 8N7011) $1.70

Hydraulic Control Valve - This Control Valve does NOT have a slot in the round end. Fits TE20, TEA20, TEF20, TO20, TO30. Hydraulic Valve Assembly includes housing, pintle, spring, pin clip, fully assembled. (Item #: 110908, Ref: 9N640) $20.50

Hydraulic Control Valve - With slotted end, without handle. For tractor models TO30, 50 Massey Harris. Replaces 181163M1 (Item #: 173036, Ref: 181163M1) $20.50

$Ferguson TO30 Hydraulic Cylinder-2 1\2 Inch$
Hydraulic Cylinder-2 1/2 Inch - For tractor models TE20, TEA20, TEF20, TO20, TO30. Also replaces OEM number 201183.829382M1 (Item #: 111928, Ref: 9N510D) $73.00

Hydraulic Lift Control Quadrant - Hydraulic Lift Lever Control Friction Plate fits TE20, TEA20, TO20, TO30. It Replaces original part number 180887M1, 180887V1, 185148M91. Uses friction disc C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Item #: 111910, Ref: 9N515) $30.60

Hydraulic Lift Cover Gasket Set - For TO20, TO30, TE20. Hydraulic Lift Cover. Gasket set includes 2 valve chamber gaskets, lift cover gasket, piston o-ring, back up washer, base pump gasket, 2 inspection cover gasket cylinder to center housing cover, 2 hydraulic lift cylinder housing gasket. (Item #: 113537, Ref: LCRK928) $9.80

Hydraulic Lift Piston Connecting Rod - Hydraulic Lift Rod is used on FE35, TE20, TEA20, TO20, TO30, TO35, and 50 Tractors. It replaces original part numbers 180903M2, 887893M1. (Item #: 155017, Ref: 86563314) $32.10

Hydraulic Lift Rod - For tractor models TE20, TEA20, TEF20, TO20, TO30. (Item #: 155017, Ref: 180903M2) $32.10

Hydraulic pump base to center housing Gasket - Hydraulic pump base to center housing Gasket is used on Ferguson Tractor Models: TE20, TEA20, TED20, TEF20, TO20, TO30. Replaces 181065M1, 4082/181065M1, 4082 (Item #: 112062, Ref: 9N611) $2.20

Hydraulic Pump Cam Block - Cam Block, Hydraulic Pump. For tractors: TE20, TO20, TO30, TEA20, TEF20. Replaces 181066M1. (Item #: 182638, Ref: 9N617A) $21.00

Hydraulic Pump Overhaul Kit - For TE20, TO20, TO30, TEA20, TEF20. Kit contains cam blocks, pistons, chamber repair kits, PTO shaft bushing, safety valve, and gaskets. (Item #: 118572, Ref: HPOK1) $165.20

Hydraulic Pump Piston - Piston, hydraulic pump. For tractors: TE20, TEA20, TEF20, TO20, TO30. Replaces 890675M1 (Item #: 170925, Ref: 9N615) $24.90

Hydraulic Pump Rebuild Kit, Comprehensive - For tractor models TE20, TO20, TO30. Kit contains 2 cam blocks, 2 pistons, 2 chamber repair kits, PTO shaft bushing, safety valve, 2 valve chambers, 4 copper washers, base gasket, sump pump gasket, 2 side gaskets, PTO shaft gasket, 2 side plate gaskets. Note, it may be necessary to grind the opening where the pump fits in some tractors. (Item #: 121926, Ref: S.61725) $316.00

Hydraulic Pump Safety Valve - For: TE20, TEA20, (TEF20, before serial number 330043), TO20, TO30. Relief Valve rated to 2000 PSI. **Note: The part you receive may look different than pictured, but will fit and work the same. Replaces 2174/207887, 207887, 2174, 181087M1, 181087M91, 181087V91 (Item #: 113392, Ref: 8N638) $24.00

Hydraulic Pump Valve Chamber - Right Hand Valve Chamber, less valves. For tractors: TE20, TO20, TO30. Also replaces 181074M91. Polished Steel Finish. (Item #: 170904, Ref: 9N621) $90.00

Hydraulic Pump Valve Chamber - Right Hand Valve Chamber, less valves. For TE20, TO20, TO30. Cast Iron. 9N621-C (Item #: 170904, Ref: 9N621) $90.00

Hydraulic Pump Valve Chamber - Left Hand Valve Chamber, less valves. For tractors: TE20, TO20, TO30. Also replaces 181076M91. (Item #: 170905, Ref: 9N622) $72.00

Hydraulic Pump Valve Chamber Assembly, LH - Left Hand Valve Chamber with valves. For tractor models TE20, TO20, TO30. Cast Iron. (Item #: 179000, Ref: 9N622-ASSY) $161.00

Hydraulic Pump Valve Chamber Assembly, RH - Right Hand Valve Chamber with valves. For tractor models TE20, TO20, TO30. (Item #: 186797, Ref: 9N621-ASSY) $95.00

Hydraulic Spring Seat - For tractor models TE20, TEA20, TO20, TO30 This 1 piece design replaces original 2 piece design. Also replaces 181083M1 and 181098M1. (Item #: 182473, Ref: 9N525B) $17.30

Lift Arm - For tractor models TE20, TEA20, TO20, TO30, FE35, F40, TO35, 130, 135, 202, 203, 204, 205, 2135, 25, 302, 304, 35, 65. Lift arm for both right hand/left hand side. Lift arm has a 1.80 inch inside diameter and 37 spline hole. (Item #: 114032, Ref: 180910M1) $54.00

Lift Cylinder Housing Gasket - For tractor models TE20, TEA20, TO20, TO30. Replaces 181059M1. (Item #: 179718, Ref: 9N553) $1.00

$Ferguson TO30 Lift Cylinder Piston, 2 1\2 inch$
Lift Cylinder Piston, 2 1/2 inch - For TO20, TO30, TE20, TEA20, (FE35 above serial number 65684), 50 All with 2-1/2 inch diameter piston), TO35 serial number <179303 with 2-1/2 inch diameter piston. Hydraulic Lift Cylinder Piston. DOES NOT come with Piston Rings set which can be ordered as part number 9N675. (Item #: 150691, Ref: 9N530B) $22.60

Lift Piston - This is a single groove Hydraulic Lift Piston that measures 2-1/2 inches in diameter, groove is centered 1 1/4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models 202 Indust/Const, 35, 35X, 50 Loader, TE20, TEA20, TO20, TO30, TO35. Replaces 181983M1. (Item #: 116069, Ref: NAA530B) $26.30

Lift Shaft Bushing - Bushing is 2.36 inch outside diameter, 1.97 inch inside diameter, 1.39 inches long. For tractors: TE20, TEA20, TEF20, TO20, TO30, FE35, F40, TO35, MF35, MF50, MF65, MF135, MF150, MF165. For shaft 184359M2, 4 required. If Shaft 897567M3 is used, it requires bushing 1870934M1 not supplied. (Item #: 152601, Ref: 181018M1) $8.90

Lift Yoke - This Lift Yoke measures 5/8 inch x 24 thread. For tractor models TE20, TEA20, TEF20, TO20, TO30 and fits with 8N541B. Fine Thread Style. Replaces OEM 181055M1. (Item #: 111887, Ref: 9N546C) $30.00

Quadrant Stop Kit - For tractor models TE20, TE35, TEA20, TO20, TO30, TO35, 35, 40, 50, 65, Massey Harris 50. Replaces: 825753M1. (Item #: 126615, Ref: 9N521) $8.30

Seat, Hydraulic Lift Draft Control Spring - Hydraulic Lift Draft Control Spring Seat. Fits Ferguson TE20, TEA20, TO20, TO30. Replaces: 181077M1, 890530M1, TO624. (Item #: 178127, Ref: 2N624) $9.30

Lights

Bracket Set For lights - Fits rounded fenders. For tractor models TE20, TEA20, TO20, TO30, TO35, FE35, F40, MH50, MF50, 65, 85, 90, 135, 150, 165, 175, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 290, 298, IND 20, 20C, 20D, 30, 30B, 30D, 40B, 50C. Replaces 1750674M1, 52335M1, 523334M1. (Item #: 125324, Ref: 9N13471) $54.00

Clips, Bulb Retaining, (Pack of 4) - For tractor models F40, Super 90, TO20, TO30, TO35, 135, 150, 165, 35, 40, 5 0, 65, 85, 88, 98, MH22, MH23, MH33, MH44, MH44-6, MH50. 4 used per headlight (one pack) Replaces 1002808MI (sevicable), 1750642M1 (exactly like). (Item #: 126558, Ref: S.43070) $13.50

Headlight, 12 Volt - This is a serviceable 12 Volt headlight. It is 5-3/4 inch diameter, sealed beam bulb. Will work for left or right side. This light is not like the original. Will replace 505088M91, but is not the same. There is no visor. (Item #: 183739, Ref: S.66419) $58.00

Headlight, 6 Volt, RH or LH - Light is NOT an original replacement. For: TO20, TE20, TO30, TO35. Painted light grey. Will also function on MF20, Super 90, 135, 150, 165, 175, 202, 203, 204, 2135, 302, 304, 35, 65, 85, 88, 95, 97, 98 Replaces 186141M91, 186142M91, 510436M91, 510437M91. (Item #: 113349, Ref: 2N13005C) $58.00

Headlight Bracket, Winged, Left - Winged Headlight Bracket for the left side. For TO20, TO30, 20, 30, 35, 40, 50, 65, 95. Replaces 510439M1. (Item #: 111699, Ref: 9N13473) $22.40

Headlight Bracket, Winged, Right - Headlight Winged Bracket for the right side. For TO20, TO30, 20, 30, 35, 40, 50, 65, 95. Replaces 510438M1. (Item #: 111600, Ref: 9N13472) $20.70

Headlight Washer - Used with light part number 164089AS. For the following tractors: TO20, TE20, TO30, TO35, 35, 40, 50, 65, 85, 135, TEA20-85, 150, 165, 175, 180, 770, 88, 90, Super 90, 97, 1080, 1085, 202, 1100, 1105, 203, 1130, 204, 235, 245, 255, 265, 275, 285, 30, 31 (Item #: 154899, Ref: 504781M1) $5.30

Light Ring - This Light Ring has a 6-5/8 inch outside diameter. It comes with ground wire. Attaches with two screws (not included). Replaces original part numbers 752311M91, 1752311M91 (Item #: 185530, Ref: 1752311M91) $25.90

Light Switch, Fused - For tractor models TO20, TEA20, TE20, TO30. Replaces OEM 830517M91. (Item #: 112512, Ref: 8N11654B) $10.10

Round Work Lamp, Chrome Ring - This is a 6 volt work light with switch. It bolts on and includes base bracket. Replaces OEM number 1750692M91 (Item #: 180003) $92.00

Round Work Lamp, Primer Ring - This is a 6 volt work light with switch. It bolts on and includes base bracket. Replaces OEM number 1750692M91. (Item #: 189161) $92.95

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $14.70

Sealed Beam Bulb, 6 Inch - Sealed Beam Bulb 6-volt using Double Screw Wire Connectors. For tractor models TE20, TO20, TO30, TO35 (L4019). (Item #: 111244, Ref: 1002802M91) $19.30

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket). Fits: TE20, TO20, TO30, TO35, 135, 202, 203, 204, 205, 65, 85, 90. Ferguson: 40, 50, 35. Replaces: 1750671M91, 1751824M91, 1751825M1. (Item #: 125325, Ref: 8N13423) $10.00

Tail Lite, License Light, Clear Glass Lens - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50. Uses Gasket FAA13447A, not included. (Item #: 1750664M1) $21.36

Tail Lite, License Light, Lens Gasket - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50.1750666M1 (Item #: 178109, Ref: FAA13447A) $4.50

Worklight Kit, 6 Volt, Chrome - Kit includes, 6 inch steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount (socket), and switch. Assembly required. (Item #: 180003, Ref: S.43377) $92.00

Worklight Switch - For tractor models TO20, TE20, TEA20, TO30, TO35. (Item #: 113336, Ref: 8N13740) $15.50

Oil System

Engine Oil Dipstick - For tractor models TE20, TO20, TO30, TO35, 35, 50, 135, 150 all with continental gas engine. (Item #: 121771, Ref: 1750095M1) $6.90

Oil Filler Cap - For tractor models TE20, TEA20, TO20, TO30, TO35, F40 and those using clip type caps. Oil Filler Cap will also replace gas fuel cap (not diesel). Does come with gasket. Measures 2 7/8 inches outside diameter, 1 1/2 inches inside with two outward tabs measuring 1 7/8 inches outside of tag to outside of tab. (Item #: 154962, Ref: 760029M91) $16.40

Oil Filter - Measuring 4-3/16 inches in length, 3-15/32 inches outside diameter with a 0.525 center stud hole diameter, this cartridge type filter replaces OEM numbers 835817M91, 1014219M92, 1003879M91, 840751M91, 835817V91, 1014219M92, 15434A, 452050A, 761515M1, 8152AB, AT212, O8926AB, T16546, VT2427. Used in Continental Gas applications. (Item #: 111097, Ref: 835817M91) $10.00

Oil Filter Adapter Kit, Spin On - Does not include filter. Order 113613 for the filter. For tractor models T030, TO35, 35, 40, 50, 135, 150, 202, 204, 2200, 2500, and MH50 with Z129, Z134 or Z145 Continental Engines. Engine Oil Filter Adapter Plate for spin on oil filter. Replaces: 1069954M91, 1051113M1, 1051114M1, 1051115M1 (Item #: 143112) $40.90

Oil Filter, Spin On - This filter is included in S.42809 and is the replacement needed for engines converted to spin on filters. Also replaces the following B50, 74512207, 1069954M92, 104397A, 1032015M91, 1025034M91, 928055, HMF600L04340, 7000014641, 70000-14641, 4512207, 160770AS, 538836R1, 51051. Measures 3-11/16 inch outside diameter, 5-3/8 inch long, 5/8 inch number 16 thread. (Item #: 113613, Ref: 1069954M91) $11.20

Paint

No
Picture
Paint, Dark Gray, 1 Gallon - This Ferguson Dark Gray was used on models TO20, TO30, TE20, TEA20, TED20, TEF20, FF30 and implements before 1955. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108361, Ref: TP230GAL) $58.00

No
Picture
Paint, Dark Gray, 1 Quart - This Ferguson Dark Gray was used on models TO20, TO30, TE20, TEA20, TED20, TEF20, FF30 and implements before 1955. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108360, Ref: TP230QT) $23.30

No
Picture
Paint, Dark Gray, Spray Can - This Ferguson Dark Gray was used on models TO20, TO30, TE20, TEA20, TED20, TEF20, FF30 and implements before 1955. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108359, Ref: TP230SP) $8.40

PTO / Driveline

Bearing - Bearing, outer, for PTO Output Shaft (inside diameter 1.771 inch X outside diameter 2.952 inch x .629 inch thick) For tractors: TO30, TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175 late production, MF235 For tractors with dry brakes: MF255, MF265 to serial number 9A349239, MF275 to serial number 9A349239. For tractors using snap rings on bearing. (Item #: 172368, Ref: 195498M1) $31.90

Bearing - PTO Shaft Ball Bearing for original 1 1/8 inch shaft, measures 2 7/16 inches outside diameter, 1 3/16 inch inside diameter, 5/8 inch width. For tractors: TE20, TEA20, TO20, TO30. 1440494X1, 195173M1, 339583X1, AT001040, AT1040, GA001773, GA1773. (Item #: 180397, Ref: 9N715BC) $6.10

PTO Cover - PTO Cap, aluminum alloy replacement. For tractors: TE20, TO20, TO30 all with 1-1/8 inch or 1-3/8 inch shafts. For MH44. Replaces 825787M1. (Item #: 109510, Ref: 310088) $7.80

PTO Housing Gasket - For TE20, TO20, TEA20, TO30. PTO Housing Gasket. (Item #: 109986, Ref: C5NN747A) $0.70

PTO Shaft - PTO shaft only, 1-3/8 inch 6-spline, converts original 181173M1 from 1-1/8 inch 6-spline, to 1-3/8 inch 6-spline. For tractors: TE20, TO20, TO30 (includes 181183-38 retainer sleeve). (Item #: 186970, Ref: 9N710-38) $66.00

$Ferguson TO30 PTO Shaft Assembly 1-1\8 inch shaft$
PTO Shaft Assembly 1-1/8 inch shaft - This assembly has the original 1-1/8 inch 6 spline output shaft. If you need a 1-3/8 shaft, use part number 109422. Replaces 9N700-18, 9N70018 (Item #: 134460) $59.98

PTO Shaft Conversion Assembly - Shaft Assembly converts 1-1/8 inch PTO System to 1-3/8 inch. This is a complete Assembled shaft with bearing and housing assembly that is ready to install by removing 4 bolts from cover. Length 30-7/8 inches. Fits TO20, TE20, TEA20, TED20, TEF20, TO30. Uses gasket C5NN747A and cap 310088 (not included). (Item #: 109422, Ref: 9N700-38) $83.00

PTO Shaft Seal, Double Lip - PTO Oil Seal fits 1-1/8 inch or 1-3/8 inch PTO Shaft. 2.45 inch outside diameter, 1 5/8 inch inside diameter, 5/8 inch wide. For tractor models TE20, TO20, TO30. Replaces 195763M1. (Item #: 111314, Ref: D9NN703BB) $4.10

No
Picture
PTO Shaft Sleeve - For original PTO Shafts for tractor models TEA20, TED20, TEF20, TE20, TO20, TO30. Will not fit replacement shafts. Replaces 181183M1. (Item #: 158215, Ref: 9N735B) $7.70

Sleeve Bushing - For 1-3/8 inch PTO Shafts, 1.185 inch inside diameter, 1.620 inch outside diameter. For TE20, TO20, TO30. Replaces 181183-38 (Item #: 173070, Ref: 9N73538) $6.90

Seats

Bucket Style Base Cushion - Approx 19 inches wide x 15 inches deep x 5 inches thick. Has strap to secure bottom. For models: MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This seat cushion is GREY grained vinyl. (Item #: 101317, Ref: R1000) $58.00

Bucket Style Metal Pan Seat - Color may vary. Size is approximately 19 inches wide x 13 inches deep x 9-1/2 inches high. Fits Models: TE20, TEA20, TO20, TO30, TO35, MF50, MH50, MF35, 50, 65, 85, 88, 98, 135, 150, 165, 230, 235, 240, 245, 250, 265, 283, 333, 444, 555, 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 40, 40B, 50, 50A, 50C, 200, 2135, 2200, 3165. Uses cushion number R1001 and number R1000. (Item #: 113263, Ref: 181313M93) $58.00

Bucket Style Seat and Backrest - Grey seat covered cushions, back and bottom with inlay as pictured. For tractor models MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This kit contains: backrest assembly (part number 181324M1 inlay and 513353M91 cover), seat cushion assembly (part number 181326M1 inlay and 513351M91 cover). (Item #: 133469, Ref: FCX810) $96.00

Bucket Style Seat Back - Curved seat back measures approximately 16 inches wide x 4-1/2 inches tall x 2 inches deep. Has 2 mounting studs (on back) spaced approximately 9-1/4 inches apart. For tractor models MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This seat back is GREY grained vinyl. (Item #: 101318, Ref: R1001) $45.00

Pan and Seat Cushion Set - Comes with black metal pan, black bottom cushion and black backrest cushion with metal plate and hardware. For tractor models: 135, 150, 165, 20, 20C, 20D, 2135, 2200, 235, 245, 265, 282, 283, 30, 30B, 30D, 30E, 3165, 35, 40, 40B, 50 LOADER, 50A, 50C, 555, 65, 85, 88, 98, TE20, TEA20, TO20, TO30, TO35. Replaces 181313M93, 181324M1. (Item #: 178546, Ref: 1210-1604) $161.00

Pan Seat - This tractor seat is 19 inches wide with nine holes. For TE20, TO20, TO30, MF35, MF40, MF50. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Item #: 101352, Ref: 8N400) $52.00

Seat Bracket - This seat bracket is used on the bucket style seat part number 181313M93 and is for tractor models: TEA20, TE20, TO20, TO30, TO35, 35, 50, 65, 85, 88, 98, 135, 150, 230, 235, 240, 245, 250, 265, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 35 Turf and Utility, 40, 40B, 40E, 50, 50A, 50C, 202, 203, 204, 205, 2135, 2200, 3165. Replaces original part number 181316M92. (Item #: 155779, Ref: 181316M92) $83.00

Seat Bumper, Rubber - For use in a flip top pan seat (NOT a bucket seat), .957inch head diameter, .302 inch stem length, 1.283 inch overall length. For tractor models TO20, TO30, 35, 40, (50 up to serial number 514381), 65 diesel special, 135, 202, 204, 2135. Replaces TO434A. (Item #: 126664, Ref: 180289M1) $6.70

Seat Cushion - New Black Canvas Seat Fits Massey Ferguson 35, 20, 202, 203, 204, 205, 30, 40, F40, TE20, TO20, TO30, TO35, 130, 135, 150, 185, 230, 235, 250, 283, 50, 65, 85, 88, 95 Models Interchangeable with 1690046M91-1, 1753008M1 (Item #: 183821, Ref: 1753008M1) $64.00

Seat Cushion Set - Black seat cushion and backrest cover and inlay assembly. NOTE CUSHIONS MAY COME WITH WHITE PIPING. Consists of one MFCC13 and BR205. Fits later production MF235 and MF245 tractors with foam float seat. Replaces 181324M1, 181326M1, 513353M91. (Item #: 168734, Ref: FCX811) $121.84

Seat Hinge and Pins - This is the hinge and pin found on bracket part number 181316M92. It is used for attaching bucket seat part number 181313M93. It includes 181322M1 hinge link, 181321M1 pin (3/8 inch x 6-7/8 inch) and 181320M1 pin (3/8 inch x 7-5/16 inch). (Item #: 182977, Ref: 181322M1) $45.20

Seat Pan, Flip-over - For tractor models TE20, TEA20, TO35, FE35, F40, TO20, TO30, MH50. Replaces 181330M91. May come as a different color than pictured. (Item #: 101239, Ref: C5NN400AE) $60.00

SEAT SPRING - Seat spring. Tractors: TE20, TEA20, TO20, TO30, FE35, F40, MF35, F40, F50. Replaces 825608M1 (Item #: 101242, Ref: 9N404) $60.00

Sheet Metal / Body Parts

Bolt, Hood Pivot - For tractor models TO20, TO30, TO35, TE20, TEA20, 35. One used on each side panel. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 114034, Ref: 180718M1) $5.30

Bumber Mounting Arm - Mounting arm, right or left. 2 required per bumber. For tractors: TE20, TO20, TO30, MF35 axle mount. Two required with BU10211R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 180039, Ref: BU10212R) $70.00

Bumper - For TE20, TO20, TO30, 35 - has 4 front vertical bars to protect tractor grill plus heavy duty horizontal bumper. Painted Axle mount with mounting brackets. This is an aftermarket item. Parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 113512, Ref: BU1021) $131.00

Bumper - Designed for Fords, these may need slight modification for Ferguson and Massey Ferguson fit. For TE20, TO20, TO30, TO35, 35, 135. Heavy Duty Front Bumper. Different from original. Additional $15 for shipping due to weight. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104060, Ref: 311541HD) $178.00

No
Picture
Fender - These Clamshell Fender Skin For TE20, TEA20, TO20, TO30, TO35, 35, 135, 230, 235, 245, 2135, 20. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces: 526904M91 (Item #: 100026, Ref: 526904M1) $99.00

Fender, Clamshell with Bracket - For tractor models FE35, TE20, TO20, TO30, 135, 35, 230, 235, 245, 2135, 20 Clamshell, large lip style Fender with Bracket. (Item #: 125421, Ref: 180707M92) $111.00

Fender, Clamshell without Bracket - Fender Panel (Fender Skins) comes as pictured without bracket, dished type, made exactly like the original. Price is for one fender. For tractors without roll-over protection structure. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 exc. Orchard, MF85 standard, MF135 except Vine and Orchard, MF150, MF165, MF175, MF230, MF235. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 100026, Ref: 526904M1) $99.00

Fender With Bracket - With NON-ORIGINAL TYPE BRACKET. Rear fender, dished type with mounting bracket, mounting bracket spot welded on. For tractors without roll-over protection structure. No tool box hole. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 except Orchard, MF150, MF165, MF175, MF230, MF235 except Vine and Orchard, MF245, MF255 with 16 inch rims, MF265 standard, MF275 standard, MF285 standard Industrials: 20 except Turf, 20C except Turf, 30 except Turf, 30B, 35 Utility, 40, 50, 50A, 202, 203, 204, 205, 2135 Utility, 3165 Utility, also these models with 4-post R.O.P.S., 30D, 40B, 50C. For MF1100, MF1105, MF1130. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104069, Ref: 8N16312) $99.00

Grill - For tractor models TO20, TO30. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104103, Ref: 181627M91) $200.00

Hood - These Hoods are for tractor models TO20, TO30. PLEASE BE AWARE that these hoods are not the best in quality. The sheet metal has dimples and waves - not straight. We would normally not sell this low of a quality item, but until we can locate another source, it is the best available. These are returnable, shipping at the customers expense. (Item #: 113548, Ref: 181709M91) $900.00

Hood, Dash and Grill Rubber Bumper - 1/2 inch outside diameter X 7/16 inches tall. For tractor models 20C, 20D, 20F, 30B, 30E, 30H, 40B, 40E, 50A, 50C, 50D, 50E, Super 90, TE20, TO20, TO30, 30, 31, 60, 65, 85, 88, 135, 150, 165, 175, 180, 202, 203, 204, 205, 230, 231, 235, 240, 245, 250, 255, 265, 302, 303, 404, 1080, 1100, 1130, 1150, 2135, 2200, 2640, 2675, 2705, 2745, 2775, 2805, 3165, 3505, 3525, 3545, 4500, 6500, MF 20, MF 25, MF 35, F40, MF (Ag and Ind): 40, 50, TO35. Replaces: 194768M1. (Item #: 163112, Ref: 180673M1) $0.90

Rubber Hood Pads - Rubber Hood Supports. These rubber pads fit onto cowling under hood. For TE20, TEA20, TO20, TO30, TO35, F40. Replaces OEM 180673M1. (Item #: 113797, Ref: C5NN16N655B) $1.20

Running Board Kit - Right Hand and Left Hand - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 35 (France), 35X (France), 135 (UK), Replaces Massey Ferguson OEM number 180716M91, 180717M91, 191929M92, 890353M91, Step platform left and right sides, gas engine, Comes in red primer ready to paint, For Running Board - Right Hand use Item #: 111172, For Running Board - Left Hand use Item #: 111165 (Item #: 161139) $98.00

Side Panel, LH - For tractor models TO20, TO30. (Item #: 126533, Ref: 181704M91) $155.00

Side Panel, RH - For tractor models TO20, TO30. (Item #: 126534, Ref: 181705M91) $163.00

Step Plate Bracket, Rear - For use with 61127S and 61128S Step Plate Assembly. Fits TE20, TEA20, TEF20, TO20, TO30, TO35. Replaces 180590M1. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 111624, Ref: S.42997) $13.60

Step Plate - Left - For TE20, TEA20, TEF20, TO20, TO30, TO35. Left Hand Step Plate. 24 inches in length. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 111165, Ref: 180717M91) $37.98

Step Plate - Right - For TE20, TEA20, TEF20, TO20, TO30, TO35. Step Plate - Right. 24 inches in length. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 111172, Ref: 191929M92) $36.98

Toolbox - Metal comes primered, COLOR MAY VARY. Restoration Quality. 11 inches X 4 1/2 inches X 4 inches. Fits TRACTORS: TE20, TO20, TO30, TO35, 135, 165UK, 240, 250, 550, 560, 565, 575, 670, 690, 698, 699. Fits INDUSTRIALS: 20E, 20F, 30E, 40E, 50E. Replaces 1662749M91 AND 909616M94. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178901, Ref: 825633M91) $41.00

Steering

Axle Bushing - Front pivot support bushing. For tractors: TE20, TO20, TO30, TO35. 1-15/16 inch outside diameter, 1-25/32 inch inside diameter, 1-1/2 inches long. Replaces 180344M1 (Item #: 110832, Ref: 2N3039) $7.70

Axle Bushing, Flanged - Front pivot support bushing with swept back axle. 2.075 inch outside diameter, 1.750 inch, .820 inches long. For tractor models TE20, TO20, TO30, TO35, MF35, MF135, MF235, 20, 2135. Length of bearing may vary but will fit application if over .790 inches. (Item #: 114715, Ref: 182850M1) $4.98

Axle Pin Bushing - Long variation of 182850M1. For the same application but length is 1.482 inches. For: TE20, TO20, TO30, TO35, MF35, MF135, MF235 industrial: 20, 2135. 2.075 inch outside diameter, 1.750 inch, 1.482 inches long. (Item #: 184791, Ref: 182850M1-L) $7.60

Axle Support, Front - Pin 1-3/4 inch x 9-3/4 inch. For models 2135 Industrial, TO35 with gas engine, 135 with serial number before 9A86903, 135 UK with serial number before 140129, 20 with serial number before 9A86902, 35 and FE35X. (Item #: 165186, Ref: 888347M2) $456.00

Axle, Swept Front with Bushing - For Massey Ferguson: Industrial 20, 2135, FE35, TE20, TEA20, TEF20, TO20, TO30 TO35, 135, 230, 235, 35. Swept Front Axle with Bushing. (Item #: 173497, Ref: 183219M91) $160.00

Drag Link Dust Cover - Rear Tie Rod Boot with leather insert. Fits tractor models TEA20, TO20, TO30, TO35, MF35. Replaces: TO3324. (Item #: 178150, Ref: 9N3324OE) $16.00

Front Axle Pin - For TO20, TE20, TEA20, TO30. Front Axle Pin. 1 3/4 inches in diameter 4 1/4 inches in length. The bolt hole is 9/16 inches and the center hole is 1 5/16 inches. (Item #: 182845, Ref: 825002M1) $35.30

Front Axle Pin - Solid Center - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 35X, 135, 135 (s/n 9A86902-earlier), 148 (s/n 604669-earlier), 2135, Replaces Massey Ferguson OEM number 183221M1, 193746M1, Diameter: 1.75", Length: 5.50", (Item #: 155652) $31.70

Pivot Pin - Pivot Pin for swept back axles. VERIFY MEASUREMENTS. 1-3/4 inch outside diameter, 5 1/2 inches long, 1 inch bolt hole (which adequately replaces a 7/8) and 1 inch diameter crank hole. Will fit shorter applications. Fits TO20, TO30, TO35, 35, 135 prior to serial number 9A86902; Industrials: 20 prior to serial number 9A86902; 2135 Turf and narrow. Use bolt part number 181953M1 Replaces 193746M1. (Item #: 128512, Ref: 183221M1) $34.60

Power Steering Pump Filter - Measures 1.02 inches inside diameter, 2.99 inches outside diameter, 1.61 inches height. For tractor models 11, Pony, 16, Pacer, 175, 180, 20, 202, 204, 2135, 2155, 2200, 230, 235, 245, 30, 302, 303, 304, 30B, 30D, 3165, 333, 35, 4500, 50, 50D, 555, 555D, 55D, 55G, 55K, 55LP, 65, 85, 88, Colt, FE35, FE35X, 50, Mustang, Pacemaker, TO30. VERIFY MEASUREMENTS of old filter. Replaces 1008553M1, 1052262M91, EP3, P183. (Item #: 111126, Ref: AE33538A) $12.60

Seal, Power Steering Pump Driveshaft - For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.30

Spindle Bushing - Spindle Bushing for tractor models 135, 148, 20, 20C, 2135, 230, 235, 240, 250, 35, FE135, FE35, TE20, TO20, TO30, TO35. Bushing Measures 1.395 inches outside diameter X 1.265 inches inside diameter X 1.5 inches long. (Item #: 102473, Ref: 180345M1) $2.80

Spindle, LH - This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. For tractor models TE20 serial number 49999 and up, 35, FE35, TEA20, TED20, TEF20, FE35, to serial number 368615, TO20, TO30, TO35. Also replaces OEM number 897415M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102472, Ref: 180349M92) $56.00

Spindle Nut - Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Repair Kit - (4) 180345M1 bushings, (2) 18560X thrust bearings, (2) 180355M1 spindle dust seals. For tractor models FE35, TEA20, TED20, TEF20, TE20, TO20, TO30, TO35, 135, 20, 2135, 230, 235, 240, 240S, 35. (Item #: 104970, Ref: SBBSKIT01) $29.00

Spindle, RH - This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. Fits tractor models TE20 serial number 49999 and above. 35, FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, MF35. Also replaces OEM number 897414M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102471, Ref: 180346M92) $68.44

Spindle Thrust Bearing - This Spindle Thrust Bearing measures 1.250 inch inside diameter, 2-3/16 inch outside diameter, 5/8 inches deep. Replaces 195175M1. For tractor models 20, 2135, F40, FE35, MF135, MF150, MF165, MF230, MF235, MF245, MF35, MF50, MF65, TE20, TO20, TO30, TO35. (Item #: 102478, Ref: 18560X) $8.00

Steering Column Cover - Chrome cover includes spring and felt seal. Fits TE20, TEA20, TEF20, TO20, TO30. (Item #: 178011, Ref: 890576M1) $17.50

Steering Gear Inner Bushing - For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 1/8 inches inside diameter, 1 7/16 inches outside diameter, 1 1/8 inches in length. (Item #: 173163, Ref: 195783M1) $25.60

Steering Gear Outer Bushing - For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 5/16 x 1 7/16 x 1 13/64 inches. (Item #: 173164, Ref: 180363M1) $30.90

Steering Shaft and Gear - Shaft, steering gear: TE20, TO20, TO30. 13 1/2 inches long. NOTE: If the bearings for this shaft are needed please order part numbers: 5BC-TIM (Bearing), 6-TIM (Outer Race), 4CB-TIM (Inner Race). Order times two (X2) for a complete bearing set (Upper and Lower) for one tractor. Replaces 181365M1 (Item #: 108524, Ref: 9N3525) $92.00

Steering Shaft Bearing - Replaces 760906M1. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. For tractor models TE20, TO20, TO30. (Item #: 111285, Ref: 5BC-TIM) $14.50

Steering Shaft Bearing Cone - Upper or Lower Steering Shaft Bearing Cone. Fits TE20, TO20, TO30. Two used per tractor. Price is for each. (Item #: 111625, Ref: 4CB-TIM) $24.60

Steering Shaft Bearing Cup - Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. For TE20, TO20, TO30. Replaces 760907M1. (Item #: 111635, Ref: 6-TIM) $11.10

Steering Shaft Bearing Inner Cone - Bearing inner cone. One used for tractor models TE20, TO20, TO30. Part not in these models parts manual.832397M1 (Item #: 111625, Ref: 4CB-TIM) $24.60

Steering Wheel - For TO20, TO30, TO35, 35, 135, F40, 50, and 65. 17-3/4 inch diameter, 3/4 inch hub with 3/16 inch keyway. Covered Metal Spokes. (41486S) (Item #: 122474, Ref: 180576M1) $25.00

Steering Wheel Nut - Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Item #: 183746, Ref: 351103S) $4.10

Steering Wheel Nut, Black - Black, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40. Repalces OEM 195592M1. (Item #: 351103CCBlack) $7.86

Steering Wheel Nut, Chrome - Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench. (Item #: 150988, Ref: 351103CC) $8.10

Steering Wheel - Original Type - For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes. (Item #: 101418, Ref: 180576M1-OE) $27.70

Steering Wheel Washer - This steering wheel washer is 1.497 inch outside diameter, 0.645 inch inside diameter and is 0.180 inches thick. It is used on F40, TE20, TO20, TO30, TO35, 135, 35, 50, 65, 85, 88, 202, 204, 2135. Replaces 180577M1, 180577V1, TO3673. (Item #: 179684, Ref: 180577M1) $4.40

Tie Rod End - 3.594 inches long, .687 inch diameter, 18 left hand thread. For tractor models 135 early, 30, 350, TEA20, TED20, TEF20, TO20, TO30. (Item #: 102497, Ref: 180391M91) $14.20

Tie Rod End - Replaces OEM number 194606M91. 3.250 inches long, .687 inch diameter, 18 right hand thread. For tractor models 135 early, 30, 35, TEA20, TEF20, TED20, TO20, TO30. Has Zerk Fitting and Castle Nut. Replaces 180381M91, 180507M91, 1862029M91, 194606M91. (Item #: 105035, Ref: 180381M91) $12.50

Wheel Hub - Front Wheel Hub. Six bolt. For the following tractors: 35, 50, 65, MH50, TE20 (serial number to 49998 and 52497-52565), TO30, TO35. Replaces 180338M91, 898085M91. (Item #: 133657, Ref: 180338M92) $34.98

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. Replaces 828217M1 and 353427X1. For rear wheel on: TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35. (Item #: 182520, Ref: S.04352) $3.20

Disc-Wheel Center (28 inch) - This disc is used on multiple, Ferguson, Massey Harris and Massey Ferguson Models. Check measurements before ordering. Disc, rear wheel 28 inch and 32 inch, 8-bolt hub, 6-bolt rim. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Replaces original part number numbers 193701M1, 772861M1, 1678566M1, 1882977M1, 963613M1. Additional $35 shipping due to weight. (Item #: 149804, Ref: D9NN1036CA) $225.00

Dual Wheel Adapter - Measuring 2 3/4 inches over all length, with 9/16 UNF threads male and female sides, this adapter is used on Massey Ferguson 133, 135, 140, 148, 150, 20, 202, 204, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3165, 340, 342, 35, 35X, 50, 550, 65, 765, TE20, TEA20, TED20, TEF20, TO20. Replaces 818017M1 (Item #: 179639, Ref: 818017M1) $9.80

Front Lug Nut - Used on Ferguson and Massey Ferguson models 1100, 1130, 135, 148, 150, 165, 168, 175, 178, 180, 202 Indust/Const, 203 Indust/Const, 204 Indust/Const, 205, 20D Indust/Const, 20F Indust/Const, 2135 Indust/Const, 250, 253, 255, 263, 265S, 270, 271, 275, 281, 282, 283, 290, 30E Indust/Const, 30H Indust/Const, 3165 Indust/Const, 340, 342, 35, 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 399, 40E Indust/Const, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50 Loader, 565 Combine, 575 Skid Steer Loader, 590, 65, 670, 675, 690, 765, 85, 90, F40, TE20, TEA20, TO20, TO30, TO35, the nut has 1/2 inch - 20 thread and is 1-1/16 hex head. Replaces 195489M1, 195490M1, S9512A. (Item #: 112060, Ref: 195490M1) $2.30

Front Rim - 4.50" x 16", 6 bolt, 6" circle, 4-5/8" pilot, 5.50 or 6.00 x tire. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 535448M91, 506020M91, 195638M91.1883335M3 Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $63.00

Front Rim, 3.00 x 19 - As OE original Front rim 3.00 inch x 19 inch, uses 4.00 inch x 19 inch tire. For tractor models TE20, TEA20, TEF20, TO20, TO30. Additional $15 due to weight. Replaces 180367M91. (Item #: 103760, Ref: C5NN1015A) $82.00

Front Rim, 4.50 x 16 - Front wheel, with weight holes. 4.50 inch x 16 inch, 6-bolt, 6 inch bolt circle with 4.62 inch pilot for 5.50 inch or 6.00 inch x 16 inch tires. 2500 pound capacity. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 506020M91, 195638M91, 535448M91, R2055, and 1883335M3. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $63.00

Front Tire Tube, 4.00 x 19 - Tube for 4.00 x 18 and 4.00 x 19 - 1 and 3 rib tires. For tractor models TE20, TEA20, TEF20, TO20, TO30. (Item #: 118305, Ref: 281890) $19.50

Front Wheel Hub Seal - This Front Wheel Hub Seam measures 9/16 inches inside diameter, 2 11/16 inches outside diameter and 3/8 inches wide. Replaces OEM numbers 646110M1, 6110M1, 897363M1, 897363V1, 190443M1, 2048A, 319394M1, 2048B, 180008M1, 105334, G13053 (Item #: 112187) $5.60

Hub Cap Without Zerk Fitting - Threaded. 2.00 inch outside thread diameter, 24 right hand threads. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. Replaces 1884289M1 (Item #: 183735, Ref: 2N1139B) $6.30

Hub Cap WITH Zerk Fitting - Threaded. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. 2.00 inch outside thread diameter, 24 right hand threads. Has Zerk fitting center of cap. 2.00 inch with 24 RH Thread. (Item #: 100661, Ref: 1884289M1WZ) $6.30

Rear Rim and Center Assembly - For TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35. Size is 10 x 28. Replaces OEM part numbers 897137M92, 1678566M1. (Item #: 178951, Ref: S61968) $635.00

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 180876M1, 353427X1. (Item #: 184824, Ref: 350719KIT) $23.00

Rear Spinout Rim Stop - For 90 degree drilled rim rail. For spin out rims with 4 sided rectangle shaped stops. Limited applications, verify style before ordering. Will NOT fit the spinout rims that we offer. Replaces 232274, 1755060M1, 230832, 70230832, 7023227, E5NN1057BA, K917337, T14751 (Item #: 152053, Ref: 1755060M1) $17.80

Rim, 9X28 - This rim is for tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35. 28 inch diameter and loops are designed for 5/8 inch bolts. . Also replaces OEM number 897137M92, 1882978M92. (Item #: 103780, Ref: NCA1020C) $122.00

Spindle Dust Seal - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 65, 135, 150, 165, 230, 235, 240, 245, Compatible with Massey Ferguson Construction and industrial models 20, 2135, Replaces Massey Ferguson OEM number 180355M2, 180355M1, Upper seal used on spindle upright, (Item #: 158129) $2.50

Spindle Tab Washer - This Tab Washer is used on Massey Ferguson FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, 130, 135, 148, 150, 165, 168, 175, 178, 180, 185, 20, 20B, 20C, 20D, 20E, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 30, 3165, 340, 342, 35, 350, 35X, 360, 375E, 40, 550, 565, 65, 765. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $0.70

Wheel Bearing Kit - For tractor models 35, 40, 50, 65, FE35, TE20, TO20, TO30, TO35. Kit contains 1 each: 15123 (Cone), 15245B (Cup), 09067 (Cone), 09195 (Cup), 180008M1 (Seal). Replaces 1810391M91, 835964M91. (Item #: 102486, Ref: WBKMF1) $24.40

Wheel Rim, Rim Size: 10 x 28 - The Assembly Contains a 10 x 28 Rim, the center disc and hardware. Comes assembled. Suitable for Tire size: 12.4 x 28, Alternative Tire size: 11.2 x 28. The rim measures 10 Inches from bead to bead where the tire rests. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Verify all measurements before ordering. Replaces 193701M1, 772861M1, 1678566M1, 1882977M1, 963613M1, 180863M91, 764994M91. Additional $35 shipping due to weight. (Item #: 178951, Ref: S61968) $635.00

Wheel Stud - Stud is 9/16 inch x 2 inch. For 130 French, 135, 135UK, 150, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 240S Turkey, 245, 30, 3165, 35, 35X, 50, TE20, TEA20, TO20, TO30, TO35. Also replaces 185400M1 and 185400M2. (Item #: 151964, Ref: 825507M1) $2.10

Wheel Stud - Front wheel stud. Measures 1.59 inches overall length and .930 threaded length. Threads are 1/2 UNF. These are #5 Steel per OEM specification and may come with a silver steel finish or a gold zinc finish. Fits TE20, TEA20, TO20, TO30, TO35, FE35, F40, 1100, 1130, 130, 135, 150, 165, 175, 180, 202, 203, 204, 2135, 250, 253, 255, 263, 270, 275, 281, 283, 290, 30, 3165, 340, 35, 350, 355, 360, 365, 375, 390, 4225, 4255, 4265, 50, 575, 590, 65, 675, 690, 85. (Item #: 108606, Ref: 181328M1) $1.62

Wheel Stud Nut - Nut fits rear wheel stud. 9/16 inch NF. Used with 185400M1 and 185400M2 stud. For 130 French, 135, 135UK, 150, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 240S Turkey, 245, 30, 3165, 35, 35X, 50, TE20, TEA20, TO20, TO30, TO35. May come in a silver metal color or as pictured. (Item #: 126617, Ref: 180004M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $13.80

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.10

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $35.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.80

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.80

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.10

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.50

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $68.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $19.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $29.80

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Ferguson TO30 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Ferguson TO30 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Ferguson TO30 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ferguson TO30 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Ferguson TO30 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Ferguson TO30 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Ferguson TO30 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$Ferguson TO30 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.30

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $44.90

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $75.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $86.02

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $67.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $85.44

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $85.00

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $92.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $22.98

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $98.07

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $70.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $70.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $261.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.95

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $117.34

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $20.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $148.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $868.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $74.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $311.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $104.78

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $108.25

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $410.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $55.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $70.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $26.20

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $10.90

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $63.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $81.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $32.90

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $12.40

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $56.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $21.70

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.50

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $54.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $20.40

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $129.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $63.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $93.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $1.98

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $52.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $136.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $160.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $150.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00