FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 440D Parts

Category: Fuel System / Air Intake

[Categories] [All 440D Parts] [All John Deere Models]

Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Item #: 178588, Ref: AA5302R) $14.70

Universal Parts and Accessories
Category: Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72) $18.80

No
Picture
Choke Cable Swivel - Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49) $15.80

Engine Heater, Tank Type - 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500) $120.00

$John Deere 440D Fuel Filter Kit, In-Line, 5\16 inch$
Fuel Filter Kit, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. Contains: Filter, 2 - hoses, 4 - clamps. (Item #: 119295, Ref: BF840) $6.40

$John Deere 440D Fuel Filter, In-Line, 1\4 inch$
Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Item #: 119294, Ref: 6511393) $8.80

$John Deere 440D Fuel Filter, In-Line, 3\8 inch$
Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Item #: 120082, Ref: BF836) $7.92

$John Deere 440D Fuel Filter, In-Line, 5\16 inch, Clear$
Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Item #: 110863, Ref: BF7736) $4.90

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043) $70.00

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259) $109.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Fuel Tank Webbing, 3 Ft - Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494) $5.20

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003) $13.30

Main Load Adjusting Needle Assembly - Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622) $57.00

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397) $20.50

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A) $33.40

Pre Cleaner Assembly, Turbo 2-3 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23) $94.68

Pre Cleaner Assembly, Turbo 5 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5) $137.82

$John Deere 440D Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP) $11.20

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories] [All 440D Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy