FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 40 Parts

Category: Electrical System

[Categories] [All 40 Parts] [All John Deere Models]

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Battery Cable - Battery Cables. 0 gauge, length 12, terminal type 2-3*. For tractor models 320, 40, 420, M. (Item #: 179707, Ref: TP-AM349T) $26.80

Battery Strap - Battery Ground Straps. 40, 320, 330, 420, 430, 440, 1010, 2010 crawler. 1 guage, length 9, terminal type Std+. For 1010, 2010, 320, 330, 40, 420, 430, 440 (Item #: 179704, Ref: TP-AL2823T) $19.30

Coil, 6V - Distributor Coil, 6 volt. Delco Remy equipped. For tractor models B, M, 40, 50 (after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M. Replaces AM373T. (Item #: 105281, Ref: D4PE12029AA) $15.00

Combo Switch Lever - Used with switches AM1866T, 10A971, 1K7654A, AR20430, AA5397R, 168089A, 30-3365891. For tractor models 1020, M, 50, 520, 530, 60, 620, 630, 70, 720, 730, 320, 330, 420, 430, 435, 440, 1520, 2020, 8430, 8630, 40. (Item #: 105695, Ref: A4653R) $7.00

Condenser - Condenser. Repalces IBB2042-SS-1.For tractor models using Presto-Lite Distributor. Replaces AT14468 for Tractors using Delco Distributors and replaces AR12000, AT14873 or AT15929 For Wico Distributors. For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W. Balers 40, 45, 55, 65, 95, 105. Combines 99, 299. Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Item #: 111194, Ref: AT14684) $3.60

Distributor Cap - This Distributor cap for a 2 Cylinder with a Delco Distributor, Vertical, 12 Volt. Plug connectors on cap are at 90 degrees or 12:00 o-clock and 3:00 o-clock. For Delco distributors up to 1963 on models: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010, 114W, 116W, 323W. Balers~ 25, 30, 40, For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M. (Item #: 111725, Ref: 1935038) $15.30

Distributor Cap - 4 Cylinder Distributor SCREW TYPE CAP For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 1960833 (Item #: 105569, Ref: 1024914M91) $10.80

Distributor Cap - 6 Cylinder Distributor CAP For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Item #: 105585, Ref: TP-R11271) $12.60

Distributor Cap, Vertical, 6 Volt - Distributor cap for Delco distributor, 2 cylinder, vertical, Please note the orientation of the 2 non-plugged terminals on top of the distributor cap (click "enlarge image"), there are two different orientations available (see Part No: 1935038 for the other orientation). Fits A, B, G, M, 320, 330, 40, 420, 440, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 103152, Ref: 1909008) $10.20

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models A, AR, AH, AN, ANH, AO, B, BR, BN, BNH, BW, BWH, G, GN, GW, M, MC, MI, MT, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010. (Item #: 103153, Ref: 1900119) $9.00

Distributor Hold Down Clamp - This Distributor Hold Down Clamp is serviceable, but not like the original on John Deere M, MC, MI, MT, 1010, 2010, 320, 330, 40, 420, 430, 440. Will replace John Deere part number M415T. (Item #: 182464, Ref: 341139R1) $8.90

Distributor Point Set - This Point Set is for a WICO DB Distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A (659290-662873)~ For 1010, 1020, 105, 12, 2010, 2020, 215, 215A, 217, 2510, 299, 323W, 40, 45, 50, 55, 600, 65, 700, 95, 99, A, AO, AR, B. (Item #: 113431, Ref: AR12003) $21.80

Distributor Point Set - This Point Set is for a WICO XB distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A (659290-662873. (Item #: 172995, Ref: AR12014) $20.70

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits M, MC, MI, MT, 320, 330, 40, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010 with one of the following Delco distributors: 1112623, 1112623, 1112577, 1112648, 1112581, 1111418. Replaces: washer: 811912, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Item #: 178103, Ref: ABC3007) $29.50

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Round Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.345 inch diameter round hole. If not sure, measure before ordering. Used on M, MC, MI, MT, 320, 330, 40; Replaces: 810794, 817363, 1847646, 1847647, 1878405 (Item #: 111459, Ref: 1878405ASSY) $15.00

No
Picture
Distributor, Rebuilt - Complete remanufactured distributor for John Deere M, 40, 320 and 330 tractors with Delco distributor 1111709, John Deere part numbers AM372T, AM792T. A refundable $75.00 core charge will be added to your order. (Item #: 204049, Ref: 1111709) $265.01

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - For Tractor Models: M gas, with Delco 1111709; 40, 320 and 330 gas with Delco 1111709, 1112571; 50, 60 and 70 LPG with Delco 1111418; 420, 430 and 440 gas with Delco 1112571. For 12 Volt, NEGATIVE ground system. (Item #: 105068, Ref: 1123) $155.00

Electronic Ignition Conversion Kit, 6 Volt Positive Ground - Use on the following tractors: M, 40, 320, 330, 420, 430, and 440 with 2-cylinder gas engine using Delco distributor # 1111709 or 1112571 or 50, 60, 70, with LPG engine using distributor 1111418. Electronic ignition conversion kit by Pertronix. Replaces points and condenser with an electronic module. Used Only on tractors with 6 volt POSITIVE ground systems. (Item #: 105069, Ref: 1123P6) $176.00

Generator - Delco Style (10222), Remanufactured, Delco Remy, 1101859 - For John Deere tractor models 40, 320, 330, 420, 430, Compatible with John Deere Construction and industrial models 440, Replaces Delco Remy manufacturer number 1101859, Replaces manufacturer number 10222, 340-31, 92-01-3060, Delco Style, Voltage: 6, Rotation: Clockwise, Amperage: 20, For Flat Mount Regulator use Item #: 105516, (Item #: 203530) $460.01

Ignition Kit, Delco Clip-Held Distributor Cap - Contains points, condenser, and rotor. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. For: A, AN, AH, AR, AO, B, BN, BW, D, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010 (to 42000), 2010 (to 42000), 3010 (to 1E32999), 4010 (to For 1010), 105, 114W, 116W, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111558. (Item #: 103151, Ref: ATK1DCR) $9.80

Ignition Kit, Delco Screw-Held Distributor Cap - Ignition KIT for Delco distributor with screw held cap with ROTOR For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Item #: 105278, Ref: ATK10DSR) $10.70

Ignition Point Set, Presto-Lite Distributor - Pre-assembled point set For tractor models using Presto-Lite Distributor. Replaces Prestolite IBP2040L. For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W.Balers 40, 45, 55, 65, 95, 105. Combines 99, 299.Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Item #: 111191, Ref: AT21062) $4.50

Ignition Tune-up Kit Less Rotor - Ignition kit, less rotor. Contains: Points, gauge, condenser. Pre-assembled points using Prestolite distributors. For: 1010, 1020, 2010, 2020, 2510, 323W. Baler; 40, 45, 55, 65, 95, 105. Combines; 99, 299. Cotton Pickers; 12. Forage harvester; 600, 700. Hi-Cycles, TA145, 217 Power Units; 215, 215A windrowers. (Item #: 105563, Ref: ATK11PL) $6.90

$John Deere 40 Ignition\Light Switch$
Ignition/Light Switch - 5 terminal, uses A4653R lever. For tractor models 320, (M, MC, MI, MT all with regulator), 40, (50 up to SN# 5021479), (60 gas up to SN# 6025999, STD gas up to SN# 604299, and Orchard), (70 gas), 330, 420, 430, 435, 440, (620 Orchard from SN# 6223000 and up). Replaces AA5071R. (Item #: 108163, Ref: AM1866T) $36.40

No
Picture
Light Arm - For tractor models 40, 420, 430. Replaces T11341T. (Item #: 180677, Ref: M2015T) $22.87

Rotor - Rotor. Replaces Prestolite IBT1016.For tractor models using Presto-Lite Distributor.For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W.Balers 40, 45, 55, 65, 95, 105. Combines 99, 299.Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Item #: 111188, Ref: AT14680) $11.30

Rotor - Used with Delco distributors with a clip held cap. For tractor models: A, AO, AR, B, D, G, M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 1010 (1112577), 2010 (1112577), 3010 (1112577), 3020 (up to serial number 58899 and 1112577), 4010 (up to serial number 39499 and 1112581). Replaces 1905590. (Item #: 110177, Ref: 1750498M1) $3.60

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H10, H10C, H10J, H11, H12, H8, H8J, RH10, RH12, RH8 spark plugs. For tractor models 320, 330, 420, 430, 820, 830. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type (Item #: 111743, Ref: AL295) $4.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter - This is a brand new Delco 10MT type starter. For Gas Applications. It is 12 volt, 10 teeth with clockwise rotation, and has a 2 hole mount. It fits multiple John Deere Tractor and Combine models; 1020, 135 Eng, 1520, 2020, 2510, 2520, 300 Indust/Const, 301 Indust/Const, 301A Indust/Const, 302 Indust/Const, 310 Indust/Const, 310A Indust/Const, 310B Indust/Const, 329G Eng, 3300 Combine, 350 Crawler, 350B Crawler, 350C Crawler, 380 Forklift, 40 Combine, 400 Indust/Const, 401 Indust/Const, 401A Indust/Const, 401B Indust/Const, 401C Indust/Const, 401D Indust/Const, 410 Indust/Const, 45 Combine, 450B Crawler, 480 Forklift, 480A Forklift, 480B Forklift, 480C Forklift, 499 Cotton Picker, 55 Combine, 600 Indust/Const, 600 Sprayer, 600A Sprayer, 6600 Combine, 700, 880 Windrower, 95 Combine. Replaces TS-1172, AM1108319, AR91813, AT18025, SE501435, SE501436, S14211, S14326, TY1465, TY26035, TY6639, TY6706, 10461600, 1107339, 1108319, 1109421, 1109576, 12301485, 1400-0172, 14000172, 323-652, 323652 (Item #: 160375, Ref: TY26037) $188.00

Starter - 6 Volt - This Rebuilt starter has 10 teeth, counter clockwise rotation, 6 Volt. For tractor models M 1954-55, 320 and 330 1956-60, 40 1953-55, 420 1952-53. Replaces 1107127, 1107200, AM1802T and AT16881. No bolt holes on nose cone. (Item #: 203427, Ref: 1107127) $360.50

Starter Armature - Fits Delco starter numbers: 1107006, 1107017, 1107024, 1107025, 1107029, 1107030, 1107035, 1107036, 1107043, 1107044, 1107045, 1107046, 1107059, 1107064, 1107094, 1107096, 1107127, 1107162, 1107165, 1107200, 1107409, 1107423, 1107436, 1107466, 1107472, 1107474, 1107820, 1107822, 1107823, 1107824, 1107905, 1107951, 1107962, 1108036, 1108059, 1108072, 1108093, 1108099, 1108109, 1108162, 1108167, 1108176. Verify Starter number before ordering. (Item #: 178583, Ref: 1872505) $69.00

Starter Drive - Starter drive, Fits L, LA, M, MT, 40, 420, 430, 440, 320, 330. Replaces JD # 1868804. Replaces OEM# 1107036, 1107064, 1107127, 1107200, 1108099, 1107165, 1108072. (Item #: 107059, Ref: 565549) $32.50

Starter Drive Parts - Complete unit available as 356037R91 (Item #: 178541, Ref: SPD12) $139.00

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style drive. for models L, LA, M, MT, 40, 420, 430, 440, 320, and 330 using starters 1107036, 1107064, 1107127, 1107200, 1108099, 1107165, 1108072. Replaces 1868804. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $55.48

Starter Knob - Plastic. For tractor models 320, M, MC, MT, 40, 330, 420, 430, 440. (Item #: 179543, Ref: M2544T) $7.50

Starter Switch - For tractor models A up to serial number 502231, AO up to serial number 272000, AR up to serial number 272000, B up to serial number 200999), H, L, LA, M, MC, MT, R, 320, 330, 40, 420, 430, 440, 50, 60. Replaces: 1882323, AT21265. (Item #: 105669, Ref: 1925781) $9.20

No
Picture
Starter Switch Lever - For tractor models 320, 40, 330, 420, 430. (Item #: 185147, Ref: M1863T) $20.44

No
Picture
Starter, Remanufactured - For tractor models 320 and 330 Gas 1956 through 1960, 40 1953 through 1955. Remanufactured requires additional $100.00 core charge. Replaces Delco Starter 1107127. (Item #: 203427, Ref: TS-1077) $360.50

Tune-up Kit - This Tune-up Kit is for John Deere 2 cylinder tractors with gas engines. Contains: Autolite spark plugs (AL216), heavy duty points, condenser, and rotor. Using 14mm, 7/16 reach, 13/16 hex spark plug. For Delco distributor thru 1963. Fits tractors 40, 320, 330 For 320, 330, 40, 420, 430, 440 (Item #: 111812, Ref: JTTK1) $20.70

Tune-up Kit - This Tune-up Kit is for John Deere tractors with 2 cylinder gas engines. Contains: Autolite spark plugs (AL 3076), heavy duty points, condenser, rotor, and gap gauge. Using 7/8-18 thread, 5/8 reach, 15/16 hex spark plug. For Delco distributor thru 1963. For tractor models 320, 330, 40, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 111810, Ref: JTTK3) $64.00

Voltage Regulator, 6 Volt, Positive Ground - For M, 40, 70, 320, 330, 420, 430, 440, all using 6V generators 1101852, 857, 859. Replaces regulators VR1814, 1118291, 308, 780. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Item #: 105516, Ref: GDR6003) $30.00

Universal Parts and Accessories
Category: Electrical System

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Item #: 114088, Ref: 2348258) $49.80

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Battery Hold Down - For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Item #: 104047, Ref: NCA10718A) $13.60

Battery Hold Down J-Bolts, Pair - This Pair of Battery Hold Down Bolts each measure 10.5 inches long. Price is for a pair. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 98185A1. Also Universal for many other Battery Hold Down Brackets. (Item #: 125150, Ref: 393161R1) $9.00

Battery Joining Cable - This cable is 2 gauge measuring 10 inches. (Item #: B204) $18.75

Battery Joining Cable - This cable is 2 gauge measuring 18 inches. (Item #: B207) $21.00

Battery Joining Cable - The cable is 2/0 gauge measuring 18 inches. (Item #: B1937) $36.00

Battery Joining cable - The cable is 2/0 gauge measuring 12 inches (Item #: 186350, Ref: B1936) $40.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 12 inches. (Item #: 183882, Ref: B1931) $33.30

Battery to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: B1932) $25.50

Battery to Starter Cable - This cable is 2/0 gauge measuring 36 inches (Item #: 184665, Ref: B1934) $53.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 48 inches. (Item #: 117381, Ref: B1935) $34.70

Cable, Battery to Starter - This cable is 2 gauge measuring 8 inches. (Item #: 184847, Ref: B188) $16.60

Cable, Battery to Starter - This cable is 2 gauge measuring 12 inches. (Item #: 184028, Ref: B189) $15.10

Cable, Battery to Starter - This cable is 2 gauge measuring 18 inches. (Item #: 184391, Ref: B190) $19.80

Cable, Battery to Starter - This cable is 2 gauge measuring 36 inches. (Item #: 184406, Ref: B192) $24.60

Cable, Battery to Starter - This cable is 2 gauge measuring 48 inches. (Item #: 173479, Ref: B227) $37.50

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Item #: 140520, Ref: D5TE12029AB) $16.20

Coil Bracket - Universal Coil Bracket (Item #: 107072, Ref: R1940) $6.10

Coil, 12 Volt with Resistance - This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Item #: 105299, Ref: 189673M1) $18.50

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 192483, Ref: 40611) $70.00

Coil, High Performance (Black), 12 Volt, Oil Filled - Heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 105092, Ref: 40511) $38.00

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Item #: 182566, Ref: 40111) $69.00

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Item #: 125199, Ref: 40011) $29.00

Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Item #: 182567, Ref: 40601) $79.00

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 182550, Ref: 40501) $71.00

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Item #: 182585, Ref: 40001) $31.98

Coil, Ultra High Performance (Black), Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 183385, Ref: 45111) $83.00

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 108304, Ref: 45011) $23.40

Coil, Ultra High Performance (Chrome), Oil Filled - Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 182456, Ref: 45001) $73.00

No
Picture
Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Item #: 111468, Ref: 1904376) $14.40

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

Pulley - This single groove pulley is 0.920 inches wide, 3.200 inch outside diameter, 0.670 inch center, for 13mm (0.50 inch) Belt. This is as a universal part, please verify measurements before ordering. (Item #: 172973, Ref: R52159) $18.00

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4-inch reach. Replace Autolite AL65. OEM 834236M1 and 157803A. NOTE: Verify spark plug type before ordering. (Item #: 172892, Ref: AL65) $4.40

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Item #: 130074, Ref: AL3076) $10.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. Copper core. (Item #: 107985, Ref: S2097) $19.70

Spark Plug Wire Set, 4 Cylinder, Universal - For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems. (Item #: 108070, Ref: CPN12259EI) $20.00

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (�Mag Wire�) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Item #: 178803, Ref: S66465) $30.80

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Item #: 103156, Ref: SWS260) $20.30

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Item #: 103155, Ref: CPN12259) $16.60

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Switch to Starter Cable - This cable is 2 gauge measuring 18 inches. (Item #: 184822, Ref: B194) $16.40

Switch to Starter Cable - This cable is 2 gauge measuring 24 inches. (Item #: 185368, Ref: B195) $15.10

Switch to Starter Cable - This cable is 2 gauge measuring 36 inches. (Item #: B196) $21.00

Switch to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: 185109, Ref: B1938) $38.50

Switch to Starter Cable - This cable is 2/0 gauge measuring 24 inches. (Item #: 134614, Ref: B1939) $43.70

Switch to Starter Cable - This cable is 2/0 gauge measuring 36 inches. (Item #: 184663, Ref: B1940) $56.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.50

$John Deere 40 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories] [All 40 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy