FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 800 Parts

Category: Steering

[Categories] [All 800 Parts] [All Ford Models]

Axle Pin Support Bushing - This Axle Pin Bushing for models 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000, NAA, Jubilee. Front Axle Bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778 inch inside diameter, 1.913 inch outside diameter, 1.5 inch length (not for heavy, industrial or grove axles). (Item #: 110832, Ref: 2N3039) $7.70

Axle Pin, Flange, Locking - For tractor models with all purpose and LCG front axles 1953 Thru 1964. Fits 600, 601, 800, 801, 2000, 4000. All using part number NCA3127A axle pin. (Item #: 112058, Ref: NCA3128A) $18.80

Axle Pin, Threaded - 1.750 inch outside diameter, length is 4.5 inch. For tractor models with all purpose and LCG front axles 1953 thru 1964. Fits 600, 601, 800, 801, 2000, 4000. (Item #: 112057, Ref: NCA3127A) $21.40

Belt - Power steering pump belt. Approx. 17/32 inches X 47.77 inches. For early style pump on tractor models 600, 601, 700, 701, 800, 801, 900, 901. Recommend measuring old belt or around pulleys. (Item #: 173491, Ref: 310050) $10.30

Bolt, Radius Rod to Front Axle - Length is 5-1/2 inches, 5/8 inch-18 thread. Head outside diameter is 7/8 inches. Fits the following tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000 (up to 1964), 4000 (up to 1964). Two used per tractor. Sold individually. Replaces 957F3415A, 86531713, NAA3415BGV, NAA3415B. (Item #: 152353, Ref: NAA3415B) $8.70

Drag Link Assembly - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000, 2031, 2130, 2131, 4000, 4031, 4120, 4121, 4131, 4131 (All 4 Cylinder Without Power Steering 1953-64), Replaces Ford OEM number 8N3287, 957E3287, C5NN3N295B, NAA3270A, NAA3290A, NAA3307B, NAA33271A, 87048406, NAA33315A, Length Adjustable 42-3/8" to 46-1/2" Center To Center Tie Rod Studs., (Item #: 125344) $125.00

Drag Link Assembly, LH OEM - This Drag Link Assembly is manufactured to look exactly like the original on Manual Steering Ford Tractors 1953-1964. Used on NAA, 600 series, 601 series, 800 series, 801 series, 2000 and 4000. All pre 1965. Left Hand. (Item #: 182955, Ref: NAA3305) $114.00

Drag Link Assembly, RH OEM - This Drag Link Assembly is manufactured to look exactly like the original on Manual Steering Ford Tractors 1953-1964. Used on NAA, 600 series, 601 series, 800 series, 801 series, 2000 and 4000. All pre 1965. Right Side. (Item #: 182956, Ref: NAA3304) $114.00

Drag Link Clamp - This Drag Link Clamp is used on Ford tractor models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 and 1801, 1939-1964. It replaces 8N3287. (Item #: 184034, Ref: 8N3287) $6.20

Drag Link Clamp - For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2100, 2110, 2120, 2130, 2131, 2300, 2310, 2600, 2610, 2910, 3000, 3100, 3110, 3120, 3300, 3310, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4131, 4140, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 530, 531, Replaces Ford OEM number 957E3287, 8N3287, (Item #: 104589) $5.30

Drag Link Dust Cover - Steering Drag Link Rear Ball Joint Cover. For tractors: 8N, 9N, 2N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5/8 inch hole, Large end is 1 7/16 inch inside diameter. (Item #: 178186, Ref: 9N3324) $13.20

Drag Link Dust Cover - Rear Tie Rod Boot with leather insert. Fits tractor models: Jubilee, NAA, NAB, 2000 4 cylinder, 2030, 2031, 2120, 2130, 2131, 2N, 4000 4 cylinder, 4030, 4031, 4120, 4121, 4130, 4131, 600, 601, 800, 801, 8N, 9N. All 4 cylinder 1939 to 1964. 1.425 inch base, .850 inches tall, .700 inch hole. Replaces: 9N3324, A0NN3324. (Item #: 178150, Ref: 9N3324OE) $16.00

Drag Link End, Front - 3.250 inches long, .750 inch diameter, 16 left hand thread. For tractor models (600, 800 up to serial number 78836 with power steering). (Item #: 104577, Ref: 309523) $33.60

Drag Link End, Front - A= 4.00 inches, B= .813 inches, 16 left hand thread. For tractor models 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 801, 851, 861, 2000, 4000. (Item #: 104578, Ref: 309591) $49.40

Drag Link End, Front - This Drag Link End is exactly like the NAA3270A except it is sealed, meaning you never have to grease them! Sealed, A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Price shown is for each, sold only in multiples of 2 items. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Item #: 100671, Ref: NAA3270A-N) $11.30

Drag Link End, Front - A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Item #: 100671, Ref: NAA3270A) $11.30

Drag Link End, LH - A= 36.44 inches, B= 1.00 inch, .813 inch diameter, 16 UN RH thread. For tractor models (600, 800 serial number 78836 and up), (2000, 4000, all 4 cylinder serial number 78836 and up). Replaces 310083. (Item #: 104580, Ref: 312871) $174.00

Drag Link End, RH - A= 34.25 inches, B= 1.00 inch, .813 inch diameter, 16 UN right hand thread. For tractor models (2000, 4000 all 4 cylinders serial number 78836 and up), (600, 601, 800, 801 serial number 78836 and up). Replaces 310082. (Item #: 104579, Ref: 312870) $201.00

Drag Link End, Rear - Length 4.250 inches, .687 inch diameter, 18 right hand thread. For tractor models: 8N, 9N, 2N, 2000 4 cylinder 1962-1964, 2031, 2120 1963-1964, 2131, 4000 1962-1963, 4031, 4120, 4131, 600, 601, 800, 801, NAA, NAB. (Item #: 100670, Ref: NAA33271A) $12.70

Drag Link Tube - 6.120 inches long. For tractor models 600 serial number 78836>, 800 serial number 78836>. (Item #: 104584, Ref: 312874) $76.00

Drag Link Tube - 5.00 inches long. For tractor models 2000, 2031, 2100, 2110, 2120, 2131, 2150, 230A, 231, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 334, 3600, 3611, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4131, 4600, 4610, 530A, 531, 600, 601, 800, 801, NAA. All with serial number less than 78836. (Item #: 104582, Ref: C5NN3349A) $31.00

Drag Link Tube - LH - Drag Link Tube is right hand. Tube measures 38.5 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11/16 inch-18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 178572, Ref: NAA33315A) $58.00

Drag Link Tube - RH - Drag Link Tube is right hand. Tube measures 36.125 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11/16 inch 18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 178571, Ref: NAA3314B) $57.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Major, Power Major, Super Major (without original Ford pump with reservoir on top of pump). Replaces: AE33538A, E101LD9. (Item #: 111126, Ref: AE33538A) $12.60

Front Axle Assembly with Bushing - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000 (with Manual 7-57/PS 55), 4000 (with Manual 7-57/PS 55), Dexta, Super Dexta. This axle is for tractor models that have a standard front end (NOT for adjustable axle). Not warrantied for use with front end loaders. Replaces NAA3010B2. (Item #: 112019, Ref: D9NN3010EA) $194.00

Front Axle Support Assembly, Used - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000 (4 Cylinder), 2031, 2120, 2131, 4000 (4 Cylinder), 4031, 4120, 4131, Replaces Ford OEM nos 312710, NCA3029B, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498650) $165.01

King Pin Repair Kit - This kit will repair both spindles. Kit contains 2 of each of the following 2N3109 spindle bushing, NCA3110A spindle bushing, C0NN3123B thrust bearing, C5NN3125A spindle seal. For tractor models 600, 800, 601, 801, (700, 900, 701, 901, 2000, 4000 all rowcrop with wide front end except hi-clearance). Tractors 1955-1965 4-cylinder tractors. (Item #: 104570, Ref: S.65107) $30.60

Lock Nut - Steering Gear Bearing Lock Nut. 1 inch 16 thread. Used on 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532, MAY ALSO FIT 600, 800, 601, 801, 2000-4000 4 Cylinder. (Item #: 172916, Ref: C5NN3707A) $8.70

Pin Front Axle - Pin, front axle unthreaded. Outside diameter 1.743 inches, inside diameter 1.310 inches, length 4 inches. For Jubilee, NAA, 500, 600, 700, 800, 6000. All 1954 through 1955 using unthreaded pin), (6000 with all purpose wide front axle 1/1963 to 12/1966). Replaces NAA3126B, 2N3126D, 86507106. (Item #: 112069, Ref: 2N3126D) $30.34

$Ford 800 Pitman Arm (LH\RH)$
Pitman Arm (LH/RH) - Steering Gear Pitman Arm for tractor models 8N (serial number 216989 and up 1949-1952), NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. Replaces NCA3590A. Measures 10 inches in length. Big end is splined at 1.06 inside diameter. Small end is smooth at .688 inches. (Item #: 116149, Ref: 86542743) $82.00

Power Steering Cylinder Seal Kit - For original equipment with 1/2 inch rod. Fits multiple Ford Tractors using original E2NN3A540BA and E2NN3D547AA cylinders. Models: 600, 601, 800, 801, 2000, 3000, 4000. Replaces Ford repair kit number CAPN3301B. Contains one each of the following: AJ33656A, C1AA3A752A, C0AA3A753A, C1AA3A751A, 371033S. Verify your original equipment manufacturer cylinder part number before order. Replaces 87045114, CAPN3301B. Note, this kit may arrive with more parts than shown. These other parts are used on non-tractor applications and can be disregarded. (Item #: 155447, Ref: CAPN3301B) $23.00

Power Steering Gear Bearing and Races - These Bearing and Races are used on the Steering Worm Shaft on power steering models; 2000, 3000, 4000SU, 3400, 4110, 4400, 2600, 3600, 3900, 4100, 4600SU, 2610, 3610, 3910, 230A, 530A (1965-84). Also used on Ford 4 Cylinder 1955-1964. Replaces LA33586A (Item #: 170142, Ref: LA33586A) $52.00

Power Steering Hose - Single wire braid hose with fittings; 35 inches long. For 600, 800, NAA. (Item #: 179263, Ref: FPH34) $38.41

Power Steering Hose - Single Wire, Braid Hose Assembly with fittings, overall length 30 inches, 90 degree ends, 7/16 x 24 threads. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 600, 700, 800, 900. Replaces N10116, C0NN3C770A, C0NN3C769A, C0NN3A717B, C0NN3A714B, A45A1. (Item #: 178183, Ref: FPH30) $33.40

Power Steering Pump Bracket - This Power Steering Pump Mounting Bracket is for pump part number S.60189 for the following models: 600, 601, 701, 800, 801, 901, 2000, 4000. (Item #: 179359, Ref: S.60157) $104.00

Power Steering Pump Pulley - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4140, Replaces Ford OEM number EBJ33556A, 231102, O.D. 3.750, Bore 0.671", Keyway 0.125", Belt Groove .500", (Item #: 126608) $63.00

Power Steering Pump, Belt Driven - This Power Steering Pump is for models 600, 800, 601, 801, 2000, 4000, 701, 901. Gas and Diesel. Replaces C3NN3A691B. Includes mounting bracket, belt and replacement pressure hose. Verify part number if possible as there were more than one type during production runs. (Item #: 111004, Ref: S.60189) $800.00

Radius Rod, Ball Socket - For tractor models: Jubilee, NAA, 2000 3 cylinder, 2000 4 cylinder, 600, 601, 800, 801, 1811, 1821, 1841, 1871, 1881, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2600V, 2810, 2910, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3600V, 3610, 3900, 3910, 4000 3 cylinder, 4000 4 cylinder, 4030, 4100, 4110, 4120, 4121, 4130, 4140, 4410, 4600SU, 8N, 9N, 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 3400, Dexta, Super Dexta. Replaces: 9N3442, E0NN3N442BA, C5NN3N442C, C5NN3N442A, GL139. (Item #: 115083, Ref: E0NN3N442BA) $17.40

Radius Rod, Socket Cap - Used with Socket E0NN3N442BA. Replaces: E0NN3N406BA, 8N3440B, C7NN3N406A, 957E3440B, 83924040, 957E3440A, 313319. (Item #: 108088, Ref: E0NN3N406BA) $10.80

Sector Shaft Seal - This Seal Measures 1.125 inches inside diameter, 1.442 inches outside diameter, and 0.200 wide. Verify size or OEM number before ordering. Many of these tractors used more than one size. The Sector Shaft (Pitman Arm) Seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces 81803188, 8N3585, 8N3591, 8N3591A, 8N3591B, AT67782, C5NN3C615A, D5UZ3591A, D5UZ3591B, 1L6784, D9NN7R510B. (Item #: 124153, Ref: C5NN3C615A) $5.10

Spindle Bushing - FORD Spindle Bushing - 1.250 inch inside diameter, 1.370 inch outside diameter, 1.500 inches long. Fits many models. Two are used 1955 and later. Four used per tractor 1939-1954. Sold individually. Replaces: 2N3109, 81802940, 957E3109B, C5NN3446A. (Item #: 100617, Ref: 2N3109) $3.60

No
Picture
Spindle Bushing - For tractor models 2000 (4-cylinder, 1962-1964), 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 3600, 3600V, 3610, 3900, 3910, 4000 (4-cylinder, 1962-1964), 4110, 4120, 4140, 4600SU, 530A, 531, 541, 600, 601 Series, 800, 801 Series, Dexta, Super Dexta. Measures 1.352 inch inside diameter, 1.474 inch outside diameter and 1.490 inch length. Also replaces 81717392, 83928345 and 957E3110B. (Item #: 100632, Ref: NCA3110A) $4.70

Spindle Bushing Kit - Spindle Bushing Kit contains: 2 upper bushings part number 2N3109 and 2 lower bushings part number NCA3110A. For tractor models 2000, 2600, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 900, Dexta, Super Dexta. (Item #: 182515, Ref: SBK5364) $26.20

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Thrust Bearing - Thrust Bearing for Spindle measures 1.345 inch inside diameter, 2.2 inch outside diameter, and width of .622 inch. For tractor models 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, Dexta, NAA, Jubilee, Super Dexta. (Item #: 100623, Ref: C0NN3123B) $5.30

Spindle, LH - Left Hand Spindle. Verify measurements of Vertical Shaft is 10.687 inches tall, 1.25 inches diameter at the top and 1.340 inches diameter at the bottom. For tractor models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Uses bushing kit SBK5364, (wheel bearing kit CBPN1200B if before serial number 137818 No Hub available), or (Wheel Bearing Kit CBPN1200C if after serial number 137818 using Hub C9NN1104F). (Item #: 100622, Ref: NCA3106B) $39.98

Spindle, RH - Right Hand Spindle. Verify measurements of Vertical Shaft is 10.687 inches tall, 1.25 inches diameter at the top and 1.340 inches diameter at the bottom. For tractor models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Uses bushing kit SBK5364, (wheel bearing kit CBPN1200B if before serial number 137818 No Hub available), or (wheel bearing kit CBPN1200C if after serial number 137818 using Hub C9NN1104F). (Item #: 100621, Ref: NCA3105B) $39.98

Steering Arm - Spindle steering arm, for manual and power steering models: 2000, 230, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610SU, 530, 530A, 531, 600, 601, 800, 801, 8N, Dexta, Jubilee, NAA, Super Dexta. Steering Arm replaces 310799, 81811668, 8N3130B, 957E3130 (Item #: 104731, Ref: 310799) $39.00

Steering Arm Dust Seal - For tractor models 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Item #: 104572, Ref: 8N3528) $2.50

No
Picture
Steering Box Assembly (Manual), Remanufactured, C3NN3503E - For Ford tractor models 600, 800, 2000, 4000 (all 4 cylinder), Replaces Ford OEM number C3NN3503E, Manual Steering Box Double Arm Style, For a New version of this sku use Item #: 158461, (Item #: 204463) $1061.01

Steering Column Bearing Kit - Used on manual steering column. Kit contains column spring, seat and bearing. Replaces Ford OEM Numbers 8N3520, 8N3517, 8N3518, C5NN3N716A. (Item #: 118504) $39.50

Steering Column Bearing Spring - This Steering Column Bearing Spring is for tractors without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Item #: 178087, Ref: 8N3520) $3.80

Steering Column Grommet - Models: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cylinder 1955-1964), 1801. (Item #: 118307, Ref: NCA3578A) $10.60

Steering Column Seal - This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). Replaces D8NN3N898AA, 83911611, 81803114 (Item #: 124493, Ref: 8N3570) $2.60

Steering Column Shim Kit - This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. For tractor models 8N with 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. Replaces 251296, 8N3595C, 8N3595D (Item #: 179603, Ref: 8N3595KIT) $23.70

Steering Column Spring Seat - For Steering Column Bearing (without power steering). Tractors: 8N and up (1948 to 1964). (Item #: 179692, Ref: 8N3518) $4.50

Steering Gear Assembly - Manual Steering Gear Assembly without arms. Fits 600, 601, 800, 801, (2000 and 4000 1955-1964). Does not fit row crops, high crops or offsets. Replace 311318, 8N3548B, NCA3575A (Item #: 185461, Ref: 8N3548B) $846.00

Steering Gear Assembly - For Ford tractor models 600, 601, 620, 630, 640, 650, 660, 800, 801, 820, 840, 850, 860, 2000, 4000, Replaces Ford OEM number C3NN3503E, Steering gear assembly with 2 drop down arms, For a Remanufactured version of this sku use Item #: 204463, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158461) $856.44

Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Item #: 124504, Ref: 8N3581B) $1.30

Steering Sector Kit - This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For tractor models (8N 1950-1952), Jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. Replaces the following OEM numbers: 1023837M1, 180560M1, 180562X1, 1A6763A, 1A-6763-A, 1AS6822, 1AS-6822, 1E-6757-A, 1E6757A, 1E6764, 1E-6764, 1E6784, 1E-6784, 1L6774, 1L-6774, 1L6784, 1L-6784, 22-456X, 251294, 33544, 33545, 34690S, 34692S, 34813S, 353428X1, 353436X1, 353440X1, 44730S, 830628M91, 833455M1, 87073S91, 87073S94, 8N33544A, 8N33544B, 8N33544C, 8N33544D, 8N33545, 8N3585, 8N3586, 8N3591, 915086, 920089, 9636445, D5UZ3591A (Item #: 178090, Ref: S.67109) $23.20

Steering Sector Retainer Seal - This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. Measures 1.125 inch I.D., 1.442 inch O.D. and 0.200 inch wide. It replaces 8N3585, 8N3591, 8N3591A, 8N3591B, D5UZ3591A, D5UZ3591B (Item #: 124153, Ref: 8N3591B) $5.10

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Steering Sector, Left Hand - Double Steering Sector [7 Teeth and 1 Double Tooth). Replaces OEM numbers 251294, C3NN3527A. For 4-Cylinder Fords Only [1950 to 1964]. (Item #: 111898, Ref: 251294) $207.00

Steering Sector, Left Hand - Left Hand Steering Sector Shaft (Single Gear) 5 tooth. For 8N serial number 216989 and up, NAA, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. Shaft cover must be late style. Replaces OEM numbers 251293 and C3NN3526A. (Item #: 114749, Ref: 251293) $219.00

Steering Shaft Bearing - For Ford tractor models NAA, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000 (1964-earlier), 2031, 2111, 2120, 2130, 2131, 4000 (1964-earlier), 4031, 4120, 4121, 4130, 4140, Replaces Ford OEM number 8N3571, Bearing Only, For Complete Bearing - Cup And Cone use Item #: 111857, (Item #: 179748) $13.50

Steering Shaft Bearing - For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 111857, Ref: 8N3571-OE) $12.50

Steering Shaft Bearing And Cup Assembly - Replacement for bearing type. For tractor models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft/top and bottom. (Item #: 178073, Ref: 8N3571-52) $22.20

Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A, 310875, B7NN3517A. For models without Power Steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901. (Item #: 124501, Ref: 8N3517) $24.00

Steering Shaft Bearing Cup - This Steering Shaft Bearing cup is used with Bearing Cone part number 8N3571-OE and measures 1.75 inches outside diameter. For tractor models up to 1964 including: 8N late, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 173338, Ref: 8N3552) $13.10

Steering Shaft Bearing and Cup Assembly - 1-3/4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for one set. Two required for the listed models. Replaces 8N3571 and 8N3552. (Item #: 111857, Ref: 8N3505) $12.50

Steering Shaft Gear Thrust Bearing Retainer - For tractor models 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. (Item #: 124154, Ref: 8N33581) $3.40

Steering Shaft Repair Kit - Repair kit for Steering Shaft. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. For 2-WD Models: 600, 640, 611, 621, 631, 641, 651, 671, 800, 840, 801, 811, 821, 831, 841, 851, 861, 871. 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140 (1965-1975); 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or without cab 1975-3/1976; without cab 4/1976-1981); 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (without cab 1981-9/1984). (Item #: 173253, Ref: SRK632AA) $47.40

Steering Shaft Upper Bearing and Race - Use (1) 8N3571-OE and (1) 8N3552 This upper steering shaft bearing and race are for models Super Major, 2600, 2610, 3000 (1/65-8/68), 3600, 3610, 3910, 4100, 4110. Replaces C5NN3552A, C5NN3N615A, 8N3571, 8N3552 (Item #: 111857, Ref: C5NN3552A) $12.50

Steering Shaft and Nut Assembly, Manual - Fits 600, 800, 601, 801, 2000, 4000 (1955- 1963). Does not come with Lower Bearing. (Item #: 114544, Ref: NCA3575A) $104.00

Steering Wheel - This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11/16 (tapered) 36 splined hub. Not like original. For 4 cylinder models, 8N, NAA, 600, 700, 800, 801, 900, 2000, 4000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 6610, 7000. (Item #: 101425, Ref: D6NN3600B) $33.00

Steering Wheel - Steering Wheel OEM Style, 17-1/2 inch diameter, 11/16 inch 36-SPLINE Hub. Metal Spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA. (R2091) (Item #: 101421, Ref: 8N3600-OE) $26.00

Steering Wheel Dome Nut Washer - With beveled edge. For tractor models 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4 cylinder), 2030, 2111, 2120, 2130. Replaces 356515S, 356515S36 (Item #: 126719, Ref: 356515S) $4.00

Steering Wheel Nut - Black - For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 359295S7, Black Finish, 11/16" - 20 Threads, (Item #: 111727, Ref: 351114CCBLACK) $6.60

Steering Wheel Nut, Chrome - Nut, Steering Wheel ACORN style. 11/16 inch-20. CHROME PLATED. For Ford 4 Cylinder Tractor Models, 1947-1964. (Item #: 101422, Ref: 351114CC) $7.30

Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn Style Nut, 11/16 inch. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Item #: 176956, Ref: 351114S) $7.60

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $127.00

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 800 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy