Bracket, Muffler - Bracket, Rear Muffler. EXACT reproduction of ORIGINAL rear muffler bracket. For tractors: 8N, 9N, 2N {1939-1952}. (Item #: 153914, Ref: 9N5260)$18.20
Exhaust Manifold Gasket Set - For exhaust manifold on 8N, 9N, 2N. (Item #: 101514, Ref: 9N9448)$5.30
Extension Pipe - Vertical Two-Piece Exhaust Pipe with clamp, less muffler. For use without muffler, straight through design for maximum exhaust flow-more power. Vertical height remains the same as assemblies with muffler. Inlet 1-1/2 inch inside diameter. Outlet 1-1/2 inch outside diameter. For 8N, 9N, 2N. (Item #: 115466, Ref: M104)$43.00
Intake and Exhaust Manifold - For Ford tractor models 2N, 8N, 9N, Replaces Ford OEM number 9N9425, 9N9425W2G, (Item #: 101513)$66.00
Manifold - High Quality Intake and Exhaust Manifold with 2 Manifold Gaskets. For 8N, 9N, 2N. Replaces: 9N9425. This part may not be painted as shown. Cosmetic surface rust is common on bare castings. (Item #: 183860, Ref: 9N9425WG)$81.00
Manifold Nut and Washer Kit - Brass Nut and Washer Kit (Kit contains 4 nuts and 4 Washers). For intake and exhaust manifold. For tractors: 8N, 9N, 2N {1939-1952}. Replaces: Nut (7/16 - 20): 33816S, 7/16 LOCK WASHER: 34808S. (Item #: 118758, Ref: 33816-KIT)$6.00
Muffler - Heavy-Duty Horizontal Muffler only. Inlet 1-1/2 inch inside diameter, outlet 1-1/2 inch outside diameter, body length 23 inches, overall length 34 inches. For 8N, 9N, 2N. Does not come with hardware. (Item #: 102440, Ref: M1002)$54.00
Muffler - Vertical Muffler. Inlet 1-1/2 inch inside diameter. Outlet 1-1/2 inch outside diameter. For 8N, 9N, 2N. (Item #: 100569, Ref: M102-0)$36.00
Muffler - Vertical Two-Piece, Muffler and Pipe with clamp. Custom design ready for assembly. Pipe inlet flared, outlet 1-1/2 inch outside diameter. For 8N, 9N, 2N (Item #: 100568, Ref: M102)$76.00
Muffler - For Ford tractor models 2N, 8N, 9N (1939-1952), Replaces manufacturer number FO-20, Muffler Mount: Horizontal, Overall Length: 34", Shell Diameter: 3-1/4", Shell Length: 23", Inlet I.D.: 1-1/2", Inlet Length: 2-1/2", Outlet O.D.: 1-1/2", Outlet Length: 8-1/2", Used To Replace Muffler In Horizontal Exhaust System, Color: Silver, Inlet Clamp use Item #: 108865, (Item #: 100566)$49.00
Muffler Clamp - Flanged Muffler Clamp. For tractor models 8N, 9N, 2N. Note that there is a large bevel and a small bevel on the inside edge of this clamp. The large side goes toward the manifold. If you install the clamp and the pipe is loose, you have it backwards. If you over-tighten, it will break. Replaces CAPN5200A (Item #: 101515, Ref: FP185)$4.80
Muffler and Pipe Assembly - Vertical one-piece Muffler and Pipe Assembly, custom design. For 8N, 9N, 2N. Pipe inlet flared, outlet 1-1/2 inch outside diameter. (Item #: 100567, Ref: M200)$77.00
Muffler and Pipe Assembly OEM - Just like the original, this Muffler Assembly includes the FoMoCo Script and original part number. Used on Ford 9N, 2N and 8N tractors, 1939-1952. Replaces 8N5230. (Item #: 183686, Ref: 8N5230S)$106.00
Vertical Exhaust Pipe - For Ford tractor models 2N, 8N, 9N, Inlet I.D.:1-3/8", Vertical Length:29", Horizonal Length:13-1/2", Outlet O.D.:1-1/2", Use With 115466, (Item #: 120192)$48.00
Universal Parts and Accessories Category: Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C)$76.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C)$103.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119041, Ref: ZNL89027C)$117.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C)$123.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR)$106.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR)$106.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 116019, Ref: ZNL89054C)$125.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a universal part. Verify Measurements before ordering. (Item #: 116058, Ref: ZNL89375C)$162.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR)$167.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C)$147.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C)$170.00
Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR)$89.00
Exhaust Extension, Curved 1-1/2 Inch - Includes Clamp. It has a 1-1/2 inch inlet inside diameter and is 18 inches long. Replaces EE112, R1790 (Item #: 180501, Ref: EE1)$39.00
Exhaust Extension, Curved 1-3/4 ID - Includes Clamp. It has a 1-3/4 inch inlet inside diameter and is 18 inches long. This is a universal part. Verify measurements before ordering. Replaces EE134 R1791 (Item #: 180503, Ref: EE2)$40.00
Exhaust Extension, Curved 2 Inch - Includes Clamp. It has a 2 inch inlet inside diameter and is 18 inches long. This is a universal part. Verify measurements before ordering. Replaces EE200, R1792 (Item #: 179527, Ref: EE3)$45.00
Exhaust Extension, Curved 2-1/2 Inch - Includes Clamp. It has a 2-1/2 inch inlet inside diameter and is 18 inches long. This is a universal part. Verify measurements before ordering. Replaces EE212, EE-5, R1794 (Item #: 179530, Ref: EE5)$36.35
Exhaust Extension, Curved 2-1/4 Inch - Includes Clamp. It has a 2 inch inlet inside diameter and is 18 inches long. This is a universal part. Verify measurements before ordering. Replaces EE214, R1793, EE-4 (Item #: 179529, Ref: EE4)$34.77
Exhaust Extension, Curved 2-3/4 Inch - Includes Clamp. It has a 2-3/4 inch inlet inside diameter and is 18 inches long. This is a universal part. Verify measurements before ordering. Replaces EE-6, EE234, R1796 (Item #: 179531, Ref: EE6)$35.00
Exhaust Extension, Curved 2-5/8 Inch - Includes Clamp. It has a 2-5/8 inch inlet inside diameter and is 18 inches long. This is a universal part. Verify measurements before ordering. Replaces EE-8, EE258, R1795 (Item #: 179532, Ref: EE8)$36.35
Exhaust Extension, Curved 3 Inch - Includes Clamp. It has a 3 inch inlet inside diameter and is 18 inches long. This is a universal part. Verify measurements before ordering. Replaces R1797, EE-7, EE300 (Item #: 179533, Ref: EE7)$39.25
Exhaust Extension, Curved 3-1/2 Inch - Includes Clamp. It has a 3-1/2 inch inlet inside diameter and is 20 inches overall length. This is a universal part. Verify measurements before ordering. Replaces EE312, EE-9 (Item #: 185702, Ref: EE9)$103.00
Exhaust Extension, Curved 3-3/4 Inch - Includes Clamp. It has a 3-3/4 inch inlet inside diameter and is 20 inches long. This is a universal part. Verify measurements before ordering. Replaces EE334, EE-10 (Item #: 183954, Ref: EE10)$103.00
Exhaust Extension, Curved 4 Inch - Includes Clamp. It has a 4 inch inlet inside diameter and is 20-1/2 inches long. This is a universal part. Verify measurements before ordering. Replaces EE-11 EE400, 79023426 (Item #: 131444, Ref: EE11)$117.00
Exhaust Extension, Curved 4-1/2 Inch - Includes Clamp. It has a 4-1/2 inch inlet inside diameter and is 20-1/2 inches long. This is a universal part. Verify measurements before ordering. Replaces EE-13, EE412 (Item #: 179534, Ref: EE13)$129.00
Exhaust Extension, Curved 4-1/8 Inch - Includes Clamp. It has a 4-1/8 inch inlet inside diameter and is 20-1/2 inches long. This is a universal part. Verify measurements before ordering. Replaces EE-12, EE418 (Item #: 131446, Ref: EE12)$118.00
Exhaust Extension, Curved 5 Inch - Includes Clamp. It has a 5 inch inlet inside diameter and is 21-1/2 inches long. This is a universal part. Verify measurements before ordering. Replaces EE-14, EE414 (Item #: 179535, Ref: EE14)$162.00
Muffler Clamp, 1-1/2 - New Clamp for 1-1/2 inch outside diameter muffler inlet. (Item #: 108865, Ref: MC112)$4.10
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114)$3.30
Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Item #: 182684, Ref: MC118)$3.00
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134)$4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138)$2.80
Muffler Clamp, 1-5/8 - New Clamp for 1-5/8 inch outside diameter muffler inlet. (Item #: 110549, Ref: MC158)$4.10
Muffler Clamp, 1-7/8 - New Clamp for 1-7/8 inch outside diameter muffler inlet. (Item #: 108867, Ref: MC178)$4.80
Muffler Clamp, 2 - New Clamp for 2 inch outside diameter muffler inlet. (Item #: 108868, Ref: MC200)$5.00
Muffler Clamp, 2-1/2 - New Clamp for 2-1/2 inch outside diameter muffler inlet. (Item #: 108871, Ref: MC212)$5.20
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214)$4.58
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234)$8.71
Muffler Clamp, 2-3/8 - New Clamp for 2-3/8 inch outside diameter muffler inlet. (Item #: 182686, Ref: MC238)$4.70
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300)$7.30
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312)$8.90
Muffler Clamp, 3-1/4 - New Clamp for 3-1/4 inch outside diameter muffler inlet. (Item #: 118837, Ref: MC314)$8.00
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400)$8.70
Muffler Clamp, 4-1/2 - New Clamp for 4-1/2 inch outside diameter muffler inlet. (Item #: 118838, Ref: MC412)$12.90
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500)$14.30
Rain Cap - This rain cap is for a 3.00 inch pipe. (Item #: 108641, Ref: R1805)$15.90
Rain Cap - This rain cap is for a 1.50 inch pipe. (Item #: 108631, Ref: R1798)$7.80
Rain Cap - This rain cap is for a 2.25 inch pipe. (Item #: 108634, Ref: R1801)$9.30
Rain Cap - This rain cap is for a 3.5 inch pipe. (Item #: 108643)$12.50
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799)$10.10
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800)$9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802)$11.10
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804)$11.40
Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807)$11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14)$14.30
Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15)$18.38
Stainless Steel Clamp 2 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 178136, Ref: ZNL90869A)$5.90
Stainless Steel Clamp, 2.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185781, Ref: ZNL90871A)$6.30
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A)$6.80
Stainless Steel Clamp, 3 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179755, Ref: ZNL90873A)$5.60
Stainless Steel Clamp, 3.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179757, Ref: ZNL90874A)$6.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A)$7.50
Straight Pipe - 1 1/2 x 24 Inch - The Straight Extension Pipe is 1 1/2 inch inside diameter at the inlet and is 24 inches long. If using in a vertical application, rain cap is available as part number R1798. This is a universal part. Verify measurements before ordering. (Item #: 118948, Ref: S112X24)$28.80
Straight Pipe - 1 3/4 x 24 Inch - The Straight Extension Pipe is 1 3/4 inch by 24 inch. If using in a vertical application, rain cap is available as part number R1799. This is a universal part. Verify measurements before ordering. (Item #: 118817, Ref: S134X24)$33.00
Straight Pipe - 2 1/4 x 24 Inch - The Straight Extension Pipe is 2.00 inch by 24 inch. It comes with a clamp. If using in a vertical application, rain cap is available as part number R1801. This is a universal part. Verify measurements before ordering. (Item #: 118959, Ref: S214X24)$26.60
Straight Pipe - 2 3/8 x 24 Inch - The Straight Extension Pipe is 2 3/8 inch by 24 inch. It comes with a clamp. If using in a vertical application, rain cap is available as part number R1802. This is a universal part. Verify measurements before ordering. (Item #: 118962, Ref: S238X24)$38.00
Straight Pipe - 2.00 x 24 Inch - The Straight Extension Pipe is 2.00 inch by 24 inch. It comes with a clamp. If using in a vertical application, rain cap is available as part number R1800. This is a universal part. Verify measurements before ordering. (Item #: 108145, Ref: S200X24)$32.00
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
