FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 400 Parts

Category: Fuel System / Air Intake

[Categories] [All 400 Parts] [All Farmall Models]

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: M, MD, WR9S, Super WD9, 400, 450, W400, W450, 460, 504, 544 diesel, 455 diesel, 2544 diesel, 5606, Gas powered combines: 403 and 453 Hillside, 503, 615, 715. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Item #: 157279, Ref: R28794) $8.20

Air Cleaner Cap, Fits INSIDE pipe - For tractor models M, MD, Super M, Super MTA, W6, WD6, Super W6, 400, 450. (Item #: 111658, Ref: R4748) $49.01

Air Cleaner Pipe - 2-1/4 inch outside diameter. For tractor models M, MV, Super M, Super MV, MTA, Super MV-TA, (Super W6 serial number 3951 and up), Super W6-TA, 400, 450, W400, W450 all gas or LP. Replaces 51441D. (Item #: 126383, Ref: 357028R1) $38.51

Carburetor Drain Trough - This Carburetor Drain Trough is used on tractors with F8 starting diesel carburetors. Replaces 58843DX. (Item #: 180176, Ref: 58843DX) $64.00

Carburetor Float - Float. For Updraft International Carburetors with throat size 1-1/4 inch or 1-3/8 inch. Dimensions: 2 3/16 inch length x 1 3/16 inch height, outside diameter 3 1/2 inches. For 2606, 2706, 300, 350, 400, 450, 460, 560, 600, 606, 650, 660, 706, M, MV, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6, W9, WR9, WR9S. (Item #: 107990, Ref: 47398DX) $18.80

Carburetor Float Valve Assembly - This is a new Carburetor Float Valve Assembly with stainless steel needle. It us used on F8 Diesel Starting Carburetors (53873DH, 67860DCM). (Item #: 179312, Ref: 32581DXB) $69.00

Carburetor Fuel Line Fitting With Strainer - Fits INTERNATIONAL carburetors: 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA. 1/4 inch pipe to 5/16 inch flare. (Item #: 111514, Ref: 29902DX) $16.20

Carburetor Gasket Set - This Gasket Set is used on F8 Diesel Starting Carburetors (53873DH, 67860DCM). Contains 32606DD, 53459DA (Item #: 160212, Ref: IHS997) $9.98

Carburetor Kit, Basic - For M, MV, 6 Dist. with OEM number 47387DB, or with OEM number 50983DB. For Super M, MTA with OEM number 356948R92. For W9, WR9 with OEM number 52814D, 52815D and 60329DA. For 300, 350, 400, 450 all with OEM number 361525R92, 361525R91.: For Super H with OEM# 358065R91 (Item #: 120899, Ref: BK12V) $25.50

Carburetor Kit, Complete - For IH Carb number 362173R92 - Includes all parts shown. For 400, 450 Tractors. (Item #: 184719, Ref: R7859) $47.20

Carburetor Kit, Comprehensive - Comprehensive Carburetor Kit For IH Carb number 362173R92, 362173R91. Used on 400, 450. (Item #: 184501, Ref: R7860) $83.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 362957R91, 356948R92. For the following tractor models: Super M, 400. Center-to-Center on the mounting bolts is 2 3/4 inches. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 207119, Ref: 1418-CARB) $265.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 362173R91, 362173R92. For the following tractor models: 400, 450. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203317, Ref: 1426-CARB) $265.01

Choke Cable - 71 inches total length. For tractor models (Farmall 400, 450), 460 Grove, (Farmall 560 serial number 14819 and up, IH 560 serial number 2071 and up), (660 serial number 1349 and up), (706, 756, 806, 826, 856 all LP). Replaces 363710R93. (Item #: 113396, Ref: 374218R92) $20.10

Diesel Fuel Filter - Fuel filter element, cartridge type, final. Comes with a gasket. For tractor models 400, 450, 600, 650, MD, ODS6, Super MD, Super WD9, W400, W450, WD6, WD9. (Item #: 182548, Ref: 259479R92) $71.00

No
Picture
Diesel Fuel Pressure Gauge - Zone Style - with IH Logo For MD, Super MD, Super MD-TA, 400, 450 (Item #: 102126, Ref: R4185) $46.00

Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. Replaces 361910R1, 23995DC (Item #: 108051, Ref: R3654) $26.00

Fuel Cap - 1 15/16 inch overall outside diameter fits many: 240, 300, 350, 400, 450, 600, 650, H, HV, M, MD, MDV, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super W6, Super WD6, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Item #: 116503, Ref: 40756D) $4.98

Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Item #: 107951, Ref: 23995DA) $12.80

Fuel Filter - The fuel filter measures 3 7/16 inches diameter, 2 3/4 inches tall. Comes with two large and one small rubber seal rings. Replaces A51346, A37187, A39109, G45288, 45288, 3602788R91, 309991, C3TZ9365B, 86546599, 309531, C3TA9176A, C3TZ9155B, C3TA9155B, 1021350M91, 1021351M1, 835944M91, 1596257M91, 1021351M3, A35668, 70000-14632, 7000014632 (Item #: 159728, Ref: 309991) $24.50

Fuel Filter - Used on international 50 (w/ C175 Engine), 400 (w/ C264 Engine), 404 (w/ C135 Engine), 450 (w/ C281 Engine), 504 (w/ C153 Engine), 606 (w/ C221 Engine), 650 (w/ C350), 656 (w/ C263 Engine), 660 (W/ C263), 706 (w/C291 Engine or C263 Engine), 756, 806 (w/ C301 Engine), 826 (or 856 w/ C301 Engine), 856 (w/ C301 Engine), 2404 (w/ C135 Engine), 2504 (w/ C153 Engine), 2606 (w/C221 Engine), 2706 (w/ C263 Engine), 2756 (w/C291 Engine), 2806, 2826, 2856 (w/ C 301 Engine). This filter measures O.D.: 1-7/8 inches (47.6mm), I.D.: 23/32 inches (18.3mm), Length: 2-15/32 inches (62.7mm) Replaces 64400-DC, 64400DC, PF224 (Item #: 126044) $18.00

No
Picture
Fuel Line - For tractor models 400, W400, 450, W450. Fuel Line, Metal pipe from fuel strainer to carburetor with two nuts and 18 gallon fuel capacity. Restoration quality. (Item #: 173514, Ref: 362558R11) $37.10

No
Picture
Fuel Line - Fuel Line is Metal pipe from fuel strainer to carburetor with two nuts. Restoration quality. For tractor models 400, W400, 450, W450 with 21 1/2 gallon fuel capacity. (Item #: 173179, Ref: 365339R1) $35.80

Fuel Pipe Coupling Nut - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D., (Item #: 112642) $3.47

$Farmall 400 Fuel Strainer\Water Trap Bail$
Fuel Strainer/Water Trap Bail - For International / Farmall tractor models MD, Super MTA, TD6, WD6, WD9, 400, 450, 460, 560, 606, 660, Compatible with International Harvester (s) 616, 622, Replaces International OEM number 370785R91, 165373H1, 60878DX, 54760D, (Item #: 126522) $39.94

Gas Line With FTG - Buna-N flex gas line. For tractor models 300, 350, 400, H, M, Super H, Super M. Line has 5/16 Inverted Flare Fittings. Additional hardware may be required. Replaces part numbers: 60684D, 58363DX, 56512DX, 56451DX, and 359481R11. (Item #: 115038, Ref: FLM16) $23.10

Governor Shaft - Governor Throttle Rod To Carburetor. For 400, 450, M, MV, O6, OS6, Super M, Super W6, W400, W450, W6. (Item #: 105379, Ref: 49788DXA) $30.00

Needle and Seat - International - For International / Farmall tractor models I6, I9, M, O6, O9, TD5, TD6, TD9, W6, W9, 400, 450, 650, (Item #: 149811) $31.98

Precleaner Assembly - Complete, glass dust bowl assembly, 2-1/4 inch inside diameter base, just like the original. For tractor models M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Item #: 112510, Ref: 59096D) $69.00

Precleaner Bowl - Glass bowl for pre-cleaner assembly 59095D, 59096D. (Just like the original). Tractors: H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350, M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Item #: 111710, Ref: 54082D) $6.60

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: O12, O14, O4, O6, OS4, OS6, T340, T5, T6 (up to serial number 29964), W12, W14, W30, Super W4, W4, W40, Super W6, Super W6TA, W6, Super W9, W9, WR9S, F12, F14, F20, F30, 100, 130, 140, 200, 230, 300, 340, 350, 400, W400, 450, W450, 460, 560, 656, 660, 706, 756, 766, 806, 826, 856. Replaces 51344VA and 357957R1. (Item #: 105365, Ref: S.65504) $6.10

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.50

Universal Parts and Accessories
Category: Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72) $18.80

No
Picture
Choke Cable Swivel - Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49) $15.80

Engine Heater, Tank Type - 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500) $120.00

$Farmall 400 Fuel Filter Kit, In-Line, 5\16 inch$
Fuel Filter Kit, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. Contains: Filter, 2 - hoses, 4 - clamps. (Item #: 119295, Ref: BF840) $6.40

$Farmall 400 Fuel Filter, In-Line, 1\4 inch$
Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Item #: 119294, Ref: 6511393) $8.80

$Farmall 400 Fuel Filter, In-Line, 3\8 inch$
Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Item #: 120082, Ref: BF836) $7.92

$Farmall 400 Fuel Filter, In-Line, 5\16 inch, Clear$
Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Item #: 110863, Ref: BF7736) $4.90

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043) $70.00

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259) $109.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Fuel Tank Webbing, 3 Ft - Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494) $5.20

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003) $13.30

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

Main Load Adjusting Needle Assembly - Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622) $57.00

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397) $20.50

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A) $33.40

Pre Cleaner Assembly, Turbo 2-3 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23) $94.68

Pre Cleaner Assembly, Turbo 5 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5) $137.82

$Farmall 400 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP) $11.20

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories] [All 400 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy