FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall H Parts

Category: Engine Parts

[Categories] [All H Parts] [All Farmall Models]

No
Picture
Bare Block, Remanufactured, 6695DE, 6695DF - For International / Farmall tractor models H, W4, Replaces International Casting number 6695DE, 6695DF, Engine (s): C152, Casting Number: 6695DE, 6695DF, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 205133) $1175.01

Belt Pulley Block Off Plate - For International / Farmall tractor models H, W4, 300, 350, 460, Replaces International OEM number 49618DA, (Item #: 126476) $41.80

Camshaft Timing Gear - 48 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164), (300 with C-169). Replaces 6664D, 6664DA, 6664DB (Item #: 111368, Ref: 6664DB) $121.44

No
Picture
Connecting Rod Bolt Kit - For International / Farmall tractor models H, HV, I4, O4, OS4, Super H, W4, 300, 350, Compatible with International Combine (s) 140, Compatible with International Engine (s) C152, C164, C169, C175, Replaces International OEM number 63119DXA, Includes: Rod Bolt Washer, Rod Bolt and Connecting Rod Bolt Lock, (Item #: 169124) $101.00

Connecting Rod Bolt Lock Tab - .420 inch bolt hole diameter. For tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350 gas or LP. (Item #: 167073, Ref: 47499DB) $7.30

Connecting Rod, Used - For International tractor models H, Super H, 300, 350, Replaces International OEM nos 43785D, Verify pistion pin hole diameter, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498380) $25.01

Crankshaft Timing Gear - 24 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164 engine), (300 with C-169 engine). Replaces: 43706D (Item #: 121571, Ref: 43706D) $91.00

No
Picture
Crankshaft, Remanufactured, 43734DD, 43734DC - For International / Farmall tractor models H, W4, Replaces Casting number 43734DD, 43734DC, 43734DB, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200229) $577.01

No
Picture
Cylinder Head Service Kit - Contains Springs, Guides and valve lock. Cylinder HEAD Service KIT For 300, 350, H, HV, Super H, Super HV, Super W4 (Item #: VSKH152C) $142.69

Cylinder Head Stud - 7/16 inch x 6 1/8 inch. For gas and LP Models: H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350. 5 Used per engine. Replaces 48939DA (Item #: 178403, Ref: 48939DA) $17.40

Cylinder Head Stud - 7/16 inch diameter x 5-15/16 inches long. Fits H, HV, I4, O4, OS4, Super H, Super HV, Super W4, U164, U4, W4 Industrial: 300, 350, Farmall: 300, 350. 11 used per engine, gas and LP. Replaces: 45009D. (Item #: 178402, Ref: 45009D) $16.40

No
Picture
Cylinder Head, Remanufactured, 6186D - For International / Farmall tractor models H, Super H, W4 (Kerosene), Replaces International Casting number 6186D, Engine 152, Cylinders: 4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205490) $1325.01

Cylinder Head, Remanufactured, 8776D - For International / Farmall tractor models H, Super H, W4 (Distillate), Replaces International Casting number 8776D, Casting No. 8776D, Engine 152, Cylinders: 4, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205489) $990.01

Engine Front Support, Used - For International tractor models H (s/n 96813-later), HV (s/n 96813-later), Super H, 300, 350, Replaces International OEM nos 9362D, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431403) $33.01

Governor Spring - This Internal Governor Spring is 2.700 inches overall length with 0.110 inch wire diameter. It fits H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, T6, T9, W4 Through 9 Series, W6, W6TA, W9, WR9, WR9S, 300, 350, 400, 450, 600, 650, Wheatland: 400, 450. It replaces original part numbers 357012R1 and 49407DBX. (Item #: 179313, Ref: 49407DBX) $10.80

Governor Throttle Shaft Rebuild Kit - This Governor Throttle Shaft Rebuild Kit fits: H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T6, T6-61, U4, U6, W4, W6, 300, 350, 400, 450 all Gas and LP. Replaces: Cotter pin: 103361, Pin: 103494, Groove pin: 142952, Bushing: 45696D, Felt washer: 48493D, Lever: 6288D, Gasket: 48501D, 53877DB, 66272DA. Kit includes: lever, bushing, felt washer, (3) gaskets, groove pin, cotter pin, and pin. (Item #: 183906, Ref: IHS2559) $51.00

Governor Thrust Bearing - Bearing has a outer diameter of 1.575 inches, width of 0.472 of an inch, and an inner diameter of 0.510 of an inch. The lip has an outside diameter of 0.750 of an inch, the shaft has an diameter of 0.656 of an inch, and has 2 pin holes with an inner diameter measuring 0.186 of an inch. For the following models: H, HV, Super H, Super HV, M (gas), Super M (gas), Super MTA (gas), O4, O6, OS4, OS6, Super W4, W4, Super W6 (gas), Super W6TA (gas), W6 (gas), W9 (gas), WR9S (gas), B-275 (gas), B-276 (gas), 300, 350 (gas), 354 (gas), 400, W400, 444 (gas), 450 (gas), W450 (gas), 600 (gas), 650 (gas). Replaces 48250D, 48250DX, and ST506. (Item #: 183913, Ref: 351910R91) $81.00

Hand Starting Crank - For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450. Hand Starting Crank with Spinner. (Item #: 126697, Ref: 51544DBX) $89.00

Ring Gear Flywheel - For tractor models H, Super H, Super W4, 300, 330, 340, 350. This flywheel has 104 teeth, 13.165 inches outside diameter, 12 inches inside diameter, .550 inches wide. (Item #: 103904, Ref: 45638DB) $46.60

Ring Gear, Flywheel - This ring gear has 104 Teeth. For models H, Super H, 300, 330, 340, 350 (Item #: 103904, Ref: R1848) $46.60

Valve Exhaust - Exhaust Valve, length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Item #: 128741, Ref: 50707DA) $9.70

Valve Guide - For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 128745, Ref: 8049DR) $4.80

$Farmall H Valve Key, Intake and Exhaust, 1\2$
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 serial number less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A serial number less than 22113), W4. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Valve Spring - For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 128734, Ref: 358197R1) $1.00

Valve Spring - Used on valves with length of 5-5/16 inch. For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super AV1, Super C, (U2, U2A serial number less than 22113), W4. 8 Used Per Tractor. Sold individually. (Item #: 128518, Ref: 24544DA) $3.30

Valve, Exhaust - This exhaust valve is for tractors with flat head pistons. Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.08 inch length, 1.38 inch head diameter. (Item #: 172940, Ref: 57697D) $26.00

Valve, Exhaust - For tractors with flat head standard compression pistons, valve length 5-15/32 inch. Models: H, HV, 300, 350. (Item #: 173837, Ref: 362535R1) $36.10

Valve, Intake - Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.05 inch length, 1.50 inch head diameter. 4 used per engine. Sold individually. (Item #: 172891, Ref: 57696D) $24.60

Valve, Intake - Intake Valve. GAS. Length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Item #: 128740, Ref: 50706DA) $11.80

Valve, Intake - Intake Valve. For tractors with flat head standard compression pistons, valve length 5-15/32 inch. For tractor models H, HV, 300, 350. Price is for one valve. 4 used per engine. (Item #: 173835, Ref: 362534R1) $11.80

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Engine Parts

[Categories] [All H Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy