FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 444 Parts

Category: Cooling System

[Categories] [All 444 Parts] [All Farmall Models]

Fan Belt - This Fan Belt measures 36.562 inches length and 0.656 inch width. It is used on some B275, 424, 444 Tractors. Verify measurements before ordering. More than one size was used. Replaces International part number 237153R1 (Item #: 117363, Ref: 70209656) $13.80

Fan, 4 Blade - 16.00 inch outside diameter, 1.250 inch pilot hole, 1.937 inch center to center on bolt holes. For tractor models 200, 230, 240, (2404 with C-135 engine), (2444 Lo-Boy with C-153 engine), (330, 340, 404 all with C-135 engine), (444 with C-153 engine). (Item #: 163811, Ref: A173710) $81.00

Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.60

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Item #: 112331, Ref: 180224M91) $6.60

Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.60

$Farmall 444 Radiator Hose - Bulk 3 x 1-3\8 inch$
Radiator Hose - Bulk 3 x 1-3/8" - For International / Farmall tractor models H, OS4, Super H, Super W4, W4, 140, 200, 240, 274 (Diesel), 300, 340, 350, 404, 424 (Gas), 444, 2404, 2424 (Gas), 2444, Replaces Case IH OEM number 369092R2, 407002R1, 387721R1, I.D. (A): 1-3/8" (1.375"), O.D.: 1-3/4" (1.750"), Length: 3', For Hose Clamp use Item #: 130453, (Item #: 114083) $20.20

Radiator Hose - Lower - For International / Farmall tractor models A (s/n 355669-earlier), B, Super A, 140, 240, 404, 424 (gas), 444 (gas), Replaces International OEM number 20075DB, 2" ID, For Hose Clamp use Item #: 130455, (Item #: 112337) $3.80

Radiator Hose Upper - Measures 1.5 inches inside diameter. For 424, 444. (Item #: 114725, Ref: 388464R1) $15.20

No
Picture
Radiator Hose, Lower - Inside diameter is 1.437 inches. For tractor models 424 gas and diesel, 444 diesel. (Item #: 114726, Ref: 388463R1) $6.70

Radiator Hose, Upper - Measures 2.00 inches inside diameter on one end and 2.625 inside diameter on the other, for gas engines. For tractor models 140, 240, 404, 424, 444. (Item #: 117695, Ref: 369397R1) $15.70

Radiator Hose, Upper - Radiator hose, upper, for gas engine with Blackstone radiator. For 140, 444. One end is 2.25" I.D. the other end is 2.500" I.D.. (Item #: 116833, Ref: 405111R1) $13.50

Radiator, Gas and Diesel - This radiator has a core height of 16 inches, width of 16 1/4 inches. It is 2 inches deep with 3 rows of tubes and 5 rows of fins per inch. The inlet is 2 3/8 inches and the outlet is 2 inches. It is copper and brass construction. replaces original part number 388458R91. Not for Europe built tractor. (Item #: 152350, Ref: 388458R91) $651.00

Tower Hose Clamp 2.350" to 2.765" - For International / Farmall tractor models 140, 240, 404, 424 (Gas), 444 (Gas) Replaces International OEM number 45813D, , Compatible with John Deere tractor models 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4020, 4025, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8020, 8430, 8630, (Item #: 130442) $7.70

Water Pump - This water pump comes with hub and gasket for tractor models 140, (200, 230, IH 240 serial number 65001 and up with C123 engine), (330, 340, 404 with C135 engine), 2400, 2404, 2424, 2444, 4000, 444, all with C123 serial number 65001 and up, C135, C146 or 153 Gas engines. Replaces 367683R91, 375793R91, 367686R91, 367683R91. (Item #: 113376, Ref: 375793R92) $66.00

Water Pump - With Bypass - Less Pulley. For tractor models 384, 444, B414, B434. All with BD154 engine and an alternator. (Item #: 179814, Ref: 3119778R92) $85.00

Water Pump - Without Bypass - New with gasket and with 10mm Double Groove Pulley. For tractor models 2300A, 354, BC144, 364, B414, 424, 434, 444, B250, B275, B276, all with BD154 diesel or BC144 gas engines. This water pump replaces casting numbers 703820N, 704216. Also replaces original part numbers 3119778R92, 703820R94, 703820R97. (Item #: 100019, Ref: 703820R95) $56.00

Water Pump Gasket - Used on 200, 230, 240, 2404 Indust/Const, 2424 Indust/Const, 2444 Indust/Const, 2504 Indust/Const, 330, 340, 404, 424, 444, 504. Replaces 367687R2 (Item #: 153405, Ref: 367687R2) $1.80

Water Pump Pulley - Single groove pulley. For tractor models 2404, 2444, 2504, 404, 444, 50. (Item #: 108755, Ref: 367688R1) $81.00

Water Pump Pulley Flange - For International / Farmall tractor models B250, B275, B276, B414, TD5, 274, 276, 354, 364, 384, 424, 434, 444, 2300A, 2424, 3444, Compatible with International Construction and industrial models 2424, 3414, 3444, Compatible with International Engine (s) BC144, BD144, BD154, Replaces International OEM number 703825R11, Adjustable Flange Half, Use with Water Pump Item No. 100019 (703820R94), O.D. at one end: 0.875", O.D. at opposite end: 0.998", 5.397" total length, (Item #: 115090) $15.70

No
Picture
Water Pump Pulley, Used - For International tractor models 200 (s/n 65001-later), 230 (s/n 65001-later), 240 (s/n 65001-later), 330, 340, 404, 444, 504, Compatible with International Construction and industrial models 2404, 2444 (Lo-Boy), 2504, Replaces International OEM number 367688R1, Single Groove Pulley, For a new version of this item use Item #: 108755, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435414) $62.01

Water Pump Repair Kit - For International / Farmall tractor models B414, 276, 354, 374, 384, 434, 444, Compatible with International Construction and industrial models 3434, Replaces International OEM number 1094021R91, 3106564R91, VPE2025, (Item #: 124703) $38.40

Universal Parts and Accessories
Category: Cooling System

Bar's Leaks - Radiator Stop Leak 11oz - Heavy Duty Stop Leak is versatile, working safely and effectively on plastic, aluminum and metal radiators, heater cores, gaskets and freeze plugs. (Item #: 159209, Ref: Z14012) $6.10

Dipstick Heater - Keep your engine warm and ready to start in cold conditions with the engine dipstick heater. The element on the heater is 23 inches and flexible. It fits most dipstick holes that are 1/4 or larger. The end must be submerged at least 4 inches in oil. 120 volts, 90 watts. Not for use in openings that have plastic parts. (Item #: 158652, Ref: 5B201) $37.00

$Farmall 444 Drain Tap (1\4 Inch X 18 NPT)$
Drain Tap (1/4 Inch X 18 NPT) - Fits many models. Please check dimensions before ordering. Fits many radiators and engine blocks.1KS517 (Item #: 110749, Ref: C9NN8115A) $3.20

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Cooling System

[Categories] [All 444 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy