FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers 175 Parts

Category: Steering

[Categories] [All 175 Parts] [All Allis Chalmers Models]

Pivot Pin Assembly - Includes: 70916896 (7/8 inch NF slotted nut) and 70925721 (5/32 inch X 2 inch cotter pin). For tractor models (170, 175 gas with roll shift front axle), (180, 185, 190, 190XT, 200, D19 all with roll shift front axle), (D17 serial number 38136 and up with roll shift front axle). (Item #: 104301, Ref: 70235154) $65.00

Seal - Seal with wear sleeve for tractors with dual front wheels, except HD axle, serial number 42001 and up. For tractor models 160, 170, 175, 180, 190, 190XT, 200, 6060, 6070, 6080, 7000, D10, D12, D15, D17. (Item #: 164159, Ref: 70235120) $13.80

Seal Kit - For Allis Chalmers tractor models D21, 170, 175, 180 (s/n 12800-earlier), 185 (s/n 12800-earlier), 190, 190XT, 200, 440, 7020, 7030, 7040, 7045, 7050, 7060, 7080 Replaces Allis Chalmers OEM number 70239229, 70239192, , Compatible with Gleaner Combine (s) E3 (s/n 25001-later), F (s/n 12201-earlier), G (s/n 17001-earlier), K (s/n 24200-earlier), (Item #: 168995) $12.20

Sliding Rod - 14.750 inches long, 1.125 inch outside diameter. For tractor models 170, 175 with roll shift front axle. (Item #: 104286, Ref: 70256148) $101.00

Spindle Bushing - Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 110538, Ref: 70211743) $12.80

Spindle Thrust Washer - For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 111696, Ref: 70218762) $6.40

$Allis Chalmers 175 Spindle, LH\RH$
Spindle, LH/RH - This spindle measures A=12 inches, B=1.610 inches, C=1.625 inches, D=1.187 inches. For tractor models 170 Late, 175, 180, 185, D15, D17. Uses wheel bearing kit part number SBKAC2. (Item #: 100091, Ref: 70270038) $179.00

No
Picture
Steering Arm - Left Hand For D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200 (Item #: 100105, Ref: R2824) $117.00

Steering Arm - Right Hand, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70245868, (1.610 inches inside diameter), Right Hand, For a new version of this item use Item #: 100106, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497155) $83.01

Steering Arm, LH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Item #: 100105, Ref: 70245867) $117.00

Steering Arm, LH - 6.750 inch hole center to hole center. For tractor models (170 serial number 7500 and up with roll shift front axle), (175 serial number 2035 and up with roll shift front axle), 6060, 6070. (Item #: 104295, Ref: 70256031) $151.00

Steering Arm, RH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Item #: 100106, Ref: 70245868) $123.00

Steering Arm, RH - 6.750 inch hole center to hole center. For tractor models (170 serial number 7500 and up with roll shift front axle), (175 serial number 2035 and up with roll shift front axle), 6060, 6070. (Item #: 104296, Ref: 70256034) $147.00

No
Picture
Steering Motor, Hydraulic - For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, D21. (Item #: 124645, Ref: 70271316) $709.00

No
Picture
Steering Wheel - 15-3/4 inches in diameter, 36 spline, 7 inches deep. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7030, 7040, 7050, 7060, 7080, 7580. Replaces 256852, 1142487. (Item #: 113315, Ref: 242933) $65.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Tie Rod - Tie rod end, threaded, .813 inch diameter with 12 Right Hand threads per inch, and 3-3/4 inches to center of post. For tractor models 170, 175, 6060, 6070. (Item #: 100323, Ref: 70256151) $23.00

Tie Rod - 15.720 inches long from zerk to end, 1.125 inch diameter. For tractor models 170, 175 with roll shift front axle. (Item #: 104283, Ref: 70256144) $111.00

Tie Rod Assembly - Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For (D14, D15, D17, D19, WD, WD45 Fits these models if cut to length), (170, 175, 180, 185, 190XT, 200 fits these models with standard front end). (Item #: 100082, Ref: 70254660) $57.00

Tie Rod Assembly, Complete - Kit includes tie rod, wedge, sliding rod, tube assembly, inner tie rod and hardware. For tractor models 170, 175 both with roll shift front axle. (Item #: 104282, Ref: 70256019) $474.00

Tie Rod Nut - For Allis Chalmers tractor models 170, 175, Replaces Allis Chalmers OEM number 70256145, (Item #: 104284) $6.30

Tie Rod Tube Assembly - 36.00 inches long, 1.140 inch inside diameter. For tractor models 170, 175 with roll shift front axle. (Item #: 104287, Ref: 70256149) $368.00

Tie Rod Wedge - For Allis Chalmers tractor models 170, 175, Replaces Allis Chalmers OEM number 70256146, (Item #: 104285) $1.90

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 175 Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy